Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Wilga-2000 Trainer EPO 1160mm (PNF)

Wilga-2000 Trainer EPO 1160mm (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
2341 g
SKU:
Wilga-2000RTF
Product
Omschrijving
Wilga-2000 is gemaakt van crash veerkrachtig EPO schuim, Een perfecte R / C model voor beginners en zo goed als pro-flyers!

De kit bestaat uit een power borstelloze outrunner, ESC en servo's al geinstalleerd. Het bevat ook praalwagens voor de lol water takoffs plus standaard landingsgestel. Alles wat je nodig hebt is je eigen Rx en de batterij klaar te zijn om te vliegen. (Plug-n-Fly)

Het kleine formaat betekent dat het gemakkelijk mee te nemen zowat overal en past in de kofferbak van je auto en zijn gemakkelijk vliegeigenschappen plus flexibel en vergevingsgezind EPO constructie maken het een vrij van stress trainer voor bijna iedereen.

Gebogen vleugelpunten en vergevingsgezind aërodynamische maken dit een gemakkelijke en stabiele vliegtuig te vliegen op lage snelheid. Een grote trainer of luie zondag flyer!
 
specs:
Lengte: 888mm
Spanwijdte: 1160mm
Propeller: 3 bladen 8x6
Wing belasting: 16.82g sp.dm
Flying Gewicht: 550g / 600g (met praalwagens)
Motor: Brushless outrunner
ESC: 18A w / BEC
Servo's: 3 x 8 g
Batterijvak: 72x39x34mm

Vereiste:
4-kanaals zender en ontvanger
2S 7.4V 1300mAh batterij LiPoly
Product
Specifications

Aanvullende Informatie

  • Sku:
    Wilga-2000RTF
  • Brand:
    Nvt
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    2341.00
  • Lengte:
    1050.00
  • Breedte:
    145.00
  • Hoogte
    320.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Bad quality kit, but excellent plane.
Build quality is sub-par: pushrods do not fit, propeller is a two blade type, but hub cap is for a three blade prop, molds are obviously worn out, but it is still possible to build it... Not an easy build, though.
On the other hand it flies excellent, you can exchange wheels for floats in no time.
Love to fly this thing!
One last remark: is you plan to fly this as a Waterplane, get a 3s-battery!
It can take off from water on 2s, but it will take a long time and is hard work...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane is horrible the motor is extremely underpowered for the size and the prop is very bent the tail was very flimsy also. The plane came with missing parts and the ones that did arrive didn't fit properly. Hobbyking you can do so much better than this.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Qualit gnrale mdiocre. Les autocollants sont inutilisables. Le servo d'aile est HS la sortie de boite. L'hlice livre est une bipale alors que le cne est prvu pour une tripale, conformment la photo. Il manque une chape pour la commande de profondeur. Il manque une rondelle d'arrt pour les flotteurs. Pas de notice papier.
Quand je voie les vidos sur le net, a a pourtant l'air d'un bon appareil. Je vais donc me dbrouiller pour le monter et le tester en vol. De plus, aucunes ractions d'Hobbyking suite mes rclamations. Trs du sur cette commande car d'habitude Hobbyking ragit bien.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A very cool and relaxing plane, but after some modifications. better think it's an artf!
First change the bad combo motor and esc: i've put a emax 2228 1200kv motor, turnigy 20a esc on a custom motor mount, -4 pitch for motor. I fly on 3s 1000 or 1300 mah with 10x4.7 sf prop. The frame is good, but with mods to; first i reinforced wings on the linking (glued 25 cm carbone rod on the middle, prevent breaking in high wing load), motor hub with checkered tape and made a "box" with depron very front of the fuselage for the battery compartiment, the cg is perfect with zippy 3s 1000 25c and it can fly 12 minutes(dont trust the manual, cg is wrong, too tail heavy!!!). I ripped off the original wheel for thin 55mm lightweight wkheels, much better to take off from grass. (see my pics for this mods)
I find the setup very good, the plane is light ad balanced, very maneuvrable, climb vertically. very relaxing plane with scale speed and floats give something more. I flew 40 hours with this set up and originals servo without drama. i will buy a new frame, if an accident should hapen...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received this kit and was in 2 minds if I should send it back. It wasn't packed well there is alot of dents and cuts. Then I found the wings didn't line up the channel for the wing support was glued out of true which ment I had to cut and reglue it to fit. The engine mount wasn't evern glued ,it was floating around, cowling had to be unglued to get to it. The control rods were all the wrong size and we're floating around the box. These could have caused the damage. I got a 2 blade prop instead of the 3 blade and a spinner for 3.
HK this one is NOT a PNF it's a rebuildifferent. Quality control failed on this one.
I haven't had the chance to fly it . Sorry HK.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
So impressed with this plane, really stable in the air and a breeze to fly on the water too. Watch the cg as 3s battery needs to be pushed slightly forward or she's tail heavy. I also put hinges on the ailerons as they're really long so tended to twist. Oh and I changed to 3s esc and battery. I'd really recommend this to anyone as an easy as flyer and fun water plane. Great value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received the plane. Suplied with two bladed propeller instead of three (spinner is for 3 blades), missing linkage for ailerons, not glued engine mount. Hobbyking, please check your quality control or you will loose buyer..........
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received my Wilga today. It was well packed and in the box the plane looked alright. But when I took a closer look I saw the tail was made out of an awfull kind of foam (which is also used in fastfood boxes). The motor and ESC are okay, but those could've been better. The wings could've been better too, they don't fit together that great. The servo's look fine, they react fast and are really quiet. The fuselage and the floats look just fine. I'll soon do a flight test to see if it actualy works.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a real best beginner airplane model! At the same time it gives wide range for modifications! For people who knows Russian language you can find more detailed information here http://rc-aviation.ru/forum/topic?id=7108
Maiden flight Wilga 2000 you can watch on http://www.youtube.com/watch?v=t_9UrFXg3mY
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a real best beginner airplane model! At the same time it gives wide range for modifications! For people who knows Russian language you can find more detailed information here http://rc-aviation.ru/forum/topic?id=7108

Maiden flight Wilga 2000 you can watch on http://www.youtube.com/watch?v=t_9UrFXg3mY

verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.