Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

Wing Wing Z-84 EPO 845mm (KIT)

Wing Wing Z-84 EPO 845mm (KIT)

QTY:

Now save bewaar € 0,00 € 0,00

€ 27,65
Stock:
Gewicht:
1234 g
SKU:
374000001

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
battery
servo
motor
acc
Product
Omschrijving

The Wing Wing Z-84 is groot plezier in een klein pakket! Met zijn lage prijs en de ultra-stoere EPO foam constructie, de vleugel vleugel biedt uitstekende waarde en plezier op een prijs die u kunt niet winnen!

Eenvoud en gebruiksgemak zijn in het achterhoofd gehouden bij het ontwerpen van het casco. Het biedt een gemakkelijk te verwijderen magnetische batterij luik, plug-in vleugels en de staart ontwerp, koolstofvezel vleugel spar en gegoten koeling gaten voor het batterijcompartiment.

Belangrijker nog, de Wing Wing vliegt net zo goed als het eruit ziet. Dit model beschikt over een zeer breed vlucht envelop - het is even gelukkig zippen langs bij volgas zoals het glijden met de stroom uit. Het is ook zeer aerobatic waardoor strakke lijnen, snel broodjes en zowat elke andere vleugel aerobatics u ervoor kiest om te gooien in.

Deze versie van de Wing Wing komt in kit-vorm, dus je moet je eigen motor / ESC, servo's, 4 kanaals zender / ontvanger en accu's toe te voegen. Gewoon lijm op de vleugels en verticale steken, installeer uw elektronica, het opzetten van je regelstaven en ben je klaar om te vliegen!

Kenmerken:
Ultra-stoere EPO foam constructie
Grote koeling gaten voor het batterijcompartiment
Aerobatic vermogen vlucht
eenvoudige montage

specs:
Spanwijdte: 845mm
Lengte: 405mm
Flying Gewicht: 300g

inclusief:
Wing Wing casco kit
Hardware
Klittenband Strip (voor batterij montage)
foam lijm
instructies

vereist:
4-kanaals TX / RX met elevon mengen
2900kv borstelloze motor
10 ~ 20A brushless ESC
2 x 9g servo
1300 ~ 1500mAh 2s LiPoly

Product
Specifications

Aanvullende Informatie

  • Sku:
    374000001
  • Brand:
    Nee
  • Gewicht ( g)
    1234.00
  • Lengte
    540.00
  • Breedte:
    205.00
  • Hoogte:
    260.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I bought this as my first airplane, i only fly fpv racing quadcopter so I can use this as a fpv plane. It is hard to master, I only used a couple of batteries flying in counter clockwise circle LOS, but it is fun. You need to stick with it, I crashed a LOT :D
Dont fly in windy conditions :) and mine came WITHOUT GLUE ( so only 4 crowns), so i used 6min epoxy, what a mistake becouse it doesnt stick good, than used hobyking superglue medium ca and it is ok.
Quality
Value
Overall
Quality
Value
Overall
received in good condition, don't have time to assemble yet
Quality
Value
Overall
Quality
Value
Overall
tough plane, I crashed landing this multiple of times and its still in one piece. there is a problem in the motor mount when used with 3s 1300 and turnigy 2200kv motor, it shoots straight up as if its tail heavy, I managed to adjust the thrust angle couple of times but I'm still not getting it to fly straight when full throttle is applied. it flies great on mid throttle and hold itself in the air good even with high winds. I'll update again after managing to make this fly straight on full throttle. I'm trying mixing some elevator down when full throttle to compensate for the pitching of the nose. I suspect its more of a 2s setup with big prop but I'll keep trying till I get it right. I have another new kit that I'll paint and build after figuring out the right formula on this frame. not a bigger plane except if you have someone experienced to build it and test it for you first
Quality
Value
Overall
Quality
Value
Overall
5 stars on value & quality. I've used a 2200kv D2826 motor, 3S 2200mah battery & a 30A ESC on 6045prop. Motor & ESC are soldered direct to save weight. AUW=450g & could be lighter using a miniquad motor & a smaller battery. *Getting CG correct is essential on this wing*. For 35$ this is a great pocket-rocket ship that flies like a bigger aircraft than it really is on low-rates.
Quality
Value
Overall
Quality
Value
Overall
This is my second unit, first one lasted about a year and has been repaired and still flys- sort of....but they are such a great little wing I had to get another.

Easy to set up and launch and very capable of slow flight or simply amp it up, but i will reinforce the carbon rod connection section of the wings this time.

overall a great wing and worth the dollars.
Quality
Value
Overall
Quality
Value
Overall
Great little wing!
My setup is Turnigy SK3 2822 1740kv motor, 1400mah 3S battery, 6x4.5 bullnose prop.
It flies really well, it's super fast on full throttle but can fly slow, too.
I've set dual rates to 60pcnt and expo to 50pcnt which makes it easy to control.
Had a few crashes - still in one piece. What may be worth doing is to put some tape or laminating film on the leading edge and the nose.
Quality
Value
Overall
Quality
Value
Overall
The plane comes nicely packaged the parts seem very solid. It goes together very easily 15mins build time. Im using a Funfighter motor with a 5x5prop using 30 amp Esc 1600mah 30c battery. Flys nicely and very fast :)
Quality
Value
Overall
Quality
Value
Overall
4.75 x 4.75, 30 a esc, 2600 kv motor, 1000 mh 3s, flies good, initially needed to get fair bit of weight in nose, maybe ill try a bigger battery and rearrange equipment. good wing for the price.
Quality
Value
Overall
Quality
Value
Overall
Very very nice wing, I love it.
I'm using D2826-6 2200kv, 6x4 APC, BS40A, Turnigy TGY-50090M
I'll love it on 3S with 2.2Ah batteries
It's funny on 4s (tried it with 1.3A and 2.2A) but it need reinforcing or laminating.
Quality
Value
Overall
Quality
Value
Overall
Just received this model today, and first impressions are great!! Looks fast and aggressive, but I can imagine it sloping really well with a low weight setup! Looking forward to putting it together and maidening it!!
Quality
Value
Overall
View all reviews
Upload
Videos
  • FLY TYME - Wing Wing Goes To The Beach

  • Wing WIng FPV setup

  • FPV setup

  • Duo flight - Two WING WING chasing Flight

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo
motor
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.