New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

X-CAM A10-3H 3 As 360deg Rotation GoPro Gimbal Met A / V-Link

X-CAM A10-3H 3 As 360deg Rotation GoPro Gimbal Met A / V-Link

Shipped From:
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 142,21
status:
In voorraad
Gewicht:
680 g
SKU:
431000015-0
WANT FREE SHIPPING? Click here to find out more!

De X-CAM A10-3H Gimbal het aan de top van de lijst als het gaat om cardanusringen, de A10 heeft True continue rotatie vermogen met 3 assen met een A / V Video koppeling overdracht. Volledige controle over Roll, Tilt, Yaw, Mode en Zero naar huis. En opladen met A / V out transfer voor de GoPro held camera.

Er zijn veel 3 Axis rotatie-elementen op de markt, maar slechts een gering dat een slipper gebruiken voor ware 360deg blijft draaien en draagt ​​ook de A / V-uitgang van de GoPro boven controller voor VTX gebruik. De A / V-lijn ook bevoegdheden / laadt de GoPro. Een ander belangrijk kenmerk van de X-CAM is de mogelijkheid om naar nul of thuis met behulp van verwijzingen sensoren, dit is geweldig voor bij de overgang van een yaw controle om een ​​voorwaartse flight mode de gimbal zal automatisch naar de voorste positie.

De A10 maakt gebruik van een geavanceerde methode van trillingen controle en montage en is een volledige CNC aluminium frame met geïntegreerde motoren voor een lichte 280g gewicht.

Als je serieus bent over wat luchtfotografie met een GoPro bent is dit de gimbal voor u

Kenmerken:
• Continu 360deg rotatie
• A / V transfer kabel met kracht
• 5 chs van de aanpassing meer dan SBus
• SBus en PPM ondersteuning
• sensoren Thuis
• GUI en Upgrade vermogen
• Breed ingangsspanning
• aluminium constructie

specs:
Gewicht: 280g (zonder GOPRO)
Stabilisatie frequentie: 5200Hz
Ingangsspanning: 7,4 V ~ 16.8V (2S ~ 4S Lipo)
Tilt reis: + -90 graden; Roll reis: + -45 graden
Reizen YAW: 360 graden onbeperkt rotatie

  • Sku 431000015-0
  • Brand X-Cam
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 680.00
  • Lengte 150.00
  • Breedte 150.00
  • Hoogte 150.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Its very well built and fairly stable
Unfortunately the manual is in chinglish, it only pans in one direction until it hits the zero, the software is SO basic it bugs out on windows and doesn't connect if you run an anti-virus, the controller overheats like anything
DOES NOT respond well to input via pwm and refuses to do anything over cbus
Contacted the people who make it, the "help" they give might aswell be generic phrases that do so little they might as well be reading a take away menu
My advice, don't bother

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Its very well built and fairly stable
Unfortunately the manual is in chinglish, it only pans in one direction until it hits the zero, the software is SO basic it bugs out on windows and doesn't connect if you run an anti-virus, the controller overheats like anything
DOES NOT respond well to input via pwm and refuses to do anything over cbus
Contacted the people who make it, the "help" they give might aswell be generic phrases that do so little they might as well be reading a take away menu
My advice, don't bother

If you buy this Gimbal bear in mind the following things:
1) The software is very basic and old fashioned
2) The user manual is VERY BASIC and google translated
3) Its really difficult to actually configure it via PPM
4) It's only compatible with SBus1 Systems! Any Sbus2 System (eg Futaba) will NOT work with this gimbal
5) Altough service customer emails are replied, they usually only reply with short generic phrases that don't really help solving the problem you might have.
I WOULD NOT recommend this gimbal.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

If you buy this Gimbal bear in mind the following things:
1) The software is very basic and old fashioned
2) The user manual is VERY BASIC and google translated
3) Its really difficult to actually configure it via PPM
4) It's only compatible with SBus1 Systems! Any Sbus2 System (eg Futaba) will NOT work with this gimbal
5) Altough service customer emails are replied, they usually only reply with short generic phrases that don't really help solving the problem you might have.
I WOULD NOT recommend this gimbal.

Hallo,
Ich habe heute, im starken Wind, das Gimbel mit GOPRO Hero 4 Silver unter meinem Align M690 ausprobiert.
Das Gimbel ist erstaunlich gut und hlt die Kamera.Im Heading hold Modus kann der Copter Piruetten drehen mit Vollspeed ohne das die Kamera ihren Platz verlt.Betrieben wird der Copter mit der Jeti DC 16 ;2 Empfnger mit der D/S Bus Firmware. Der Gimbel Empfnger im Clone Modus mit umgesetzten Kanlen 12 bis 16 auf 1 bis 5.

Michael Franz

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hallo,
Ich habe heute, im starken Wind, das Gimbel mit GOPRO Hero 4 Silver unter meinem Align M690 ausprobiert.
Das Gimbel ist erstaunlich gut und hlt die Kamera.Im Heading hold Modus kann der Copter Piruetten drehen mit Vollspeed ohne das die Kamera ihren Platz verlt.Betrieben wird der Copter mit der Jeti DC 16 ;2 Empfnger mit der D/S Bus Firmware. Der Gimbel Empfnger im Clone Modus mit umgesetzten Kanlen 12 bis 16 auf 1 bis 5.

Michael Franz

I'm really impressed so far! I've only been trying the gimbal on ground, but it preforms excellent!! Motor seems to be pretty small but they work very well. I'm owning the tarot 2d gimbal and I would say it preforms as good as the 2d but with an extra axis. Thanks!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm really impressed so far! I've only been trying the gimbal on ground, but it preforms excellent!! Motor seems to be pretty small but they work very well. I'm owning the tarot 2d gimbal and I would say it preforms as good as the 2d but with an extra axis. Thanks!!

dampening balls are way too soft, i get jello even when stationary on the ground without props spinning. harden them up and they're great. note that the av link output is a 3.5mm jack and i can't seem to get the gimbal to point face down no matter what i do (no option in software)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

dampening balls are way too soft, i get jello even when stationary on the ground without props spinning. harden them up and they're great. note that the av link output is a 3.5mm jack and i can't seem to get the gimbal to point face down no matter what i do (no option in software)

Customer files
MAnual Download [949]
No File Name Download [567]
M690 Download [567]
Set-up-info Download [1547]
set-up-info Download [1547]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save