Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

X-UAV Talon FPV V-staart Drone EPO 1718mm (Kit) V2

Generating Links

X-UAV Talon FPV V-staart Drone EPO 1718mm (Kit) V2

Prijs:

Now save bespaar € 48,46 € 48,46

Special Price € 73,81 € 73,81

You save bespaar € 48,46 € 48,46

Was  € 122,27

Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
239000005-0
Geen verzendkosten? Klik hier meer leren!

De Talon FPV V-staart Drone is een all EPO gegoten casco. De kit wordt geleverd un-geassembleerd met EPO en laser gesneden triplex onderdelen. Deze versie 2 van de Talon heeft versterkt multiplex vleugel zadel / carbon support onderdelen en extra multiplex stukken gemakkelijker FPV apparatuur montage. Minder giswerk van uw kant. Ook het voorwiel multiplex mount is versterkt tot minder dan perfect aankomsten beter overleven.

Met een 4S 14.8V 10,000mAh LiPoly batterij, vlucht tijden zijn lang, en de vleugel laden nog steeds laag dankzij de gulle vleugeloppervlak van de Talon. Een royaal romp compartiment met grote top doorgeefluik en afneembare neus bubble hebt u toegang tot uw FPV apparatuur en vliegaccu in elke configuratie die u kiest. Het is een open canvas voor uw FPV behoeften.

Kenmerken:
• Kit - Alle montage en installatie van apparatuur die nodig
• Gegoten EPO casco
• Laser gesneden multiplex motor monteren en vleugel zadel kader
• Versie 2 Talon functies versterkt ply onderdelen en betere apparatuur montagemogelijkheden
• Afneembare neus bubble voor snelle toegang tot de camera uitrusting.
• Grote romp compartiment herbergt veel van de batterij en FPV Equipement configuraties.
• Two Piece plug-in vleugels met carbon vleugel buis
• Afneembare outrigger wielen

specs:
Spanwijdte: 1718mm
Lengte: 1100mm
Flying Gewicht: 2500-3000g
Wing Area:. 60 vierkante dm.

vereist:
4+ kanaals zender en ontvanger w / V-tail mengen
4S 14.8V 5000-10000mAh LiPoly Battery
2 x 9g servo
2 x 17g Servo
3648 1100KV borstelloze motor
12 Inch of minder diameter propeller
70A Brushless Speed ​​Control

  • Some Days to Remember, 2015 FPV Story
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Hric | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Sep 09, 2015

Excellent!
Smooth glides through the air, little friction, allows low consumption in flight, very tough.
I could fly 25km with 10A in 4S and land with battery 15,2v. Total weight 2.9 kg. Used engine 1000kV 3608 KD with Helix 10x7.

Hric | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Sep 08, 2015

Very... Very.. Good for Fpv.
My TALON flies 10A 4S Lipo Batery
His final weight is 2,95kg
Can fly more than 25km full and consume only 5A.
His average speed and 60 km / h.
Stol is 35km / h
Already surpassed the 164 km / h without problems.
Use Esc 60-80A YEP, 3608 Motor KD 1000kV, Propeller 10x7, OSD Arkbird, Servants Metal MX 17g, TX-RX 1.2, tracker antenna, UHF Immerssion 200-600mw. I never needed to use 600mw. I walked over 11km to 700 meters high with clean signal and 200mw UHF smoothly.
Consumes in straight flight level stabilized around the 14th or 244mah per minute.

Matthaios | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Feb 23, 2015

This plane flyies fantastic.
Is fast, agile (neutral stability) and very difficult to tip-stall. If it does, it is easy to recover.
Very easy to hand launch, very hard for rolling take-off.
Tips:
Correct CG position is 100mm from leading edge (110mm is the aft limit as it becomes pitch neutral stable).
Control throws work well at 22mm for Vtail and 18mm for AIL, as measured at their inner edges
Plenty of room to have all equipment inside, including 5.8ghz antennas, for clean and efficient airflow.
Important TIPS:
V-TAIL (X-UAVs idea to break your b*lls)
If your plan to connect Vtail servos with a Y-Cable or your autopilot/stabilizer (FEIYU eg) are not V-tail compatible, or your Vtail mixer pulses are not for the task, you have to REVERSE the position of one of the V-tail servos. So you need to check proper control movements before gluing the second V-tail servo.
If you insist on using your unnecessarily expensive autopilot/stabilizer (FEIYU eg) you can create a rudder control on the vertical lower fin and use V-tail as elevator only (still you will have to flip one of the servos)
AILERONS
Set servo control horn for a lot of mechanical (if Y-Cable connected) differential throws to counter act the impressive adverse yaw that this plane has. (google it if you don't know how)
EQUIPMENT
Put as much equipment weight (batteries, rx, autopilots etc) on the righ

LEE | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 31, 2014

FPV . . ...

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 31, 2014

Good X-UAV Talon FPV V-tail Drone EPO

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!

Accessoires