Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global

XK3650-7900KV Sensored borstelloze Inrunner (5T)

XK3650-7900KV Sensored borstelloze Inrunner (5T)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
248 g
SKU:
XK3650-7900KV
Product
Omschrijving

XK3650-7900KV Sensored borstelloze Inrunner

Specs.
Max Amps: 60A
Max Volt: 7.4V
Max Watts: 445W
Rpm / V: 7900kv (5T)
Resistance: 0,0045 ohm
No-load Huidige: 7.2a (7.4V)
Afmetingen: 35,8mm x 52,5
Montagegat diepte: 4mm
Lengte van de uitbreiding van As: 15mm
Shaft diameter: 3.175mm
Gewicht: 165g

Product
Specifications

Aanvullende Informatie

  • Sku:
    XK3650-7900KV
  • Brand:
    Nvt
  • Gewicht ( g)
    248.00
  • Lengte
    0.00
  • Breedte:
    0.00
  • Hoogte:
    0.00
  • Kv ( tpm / v )
    7900.00
  • Unit Weight (g)
    165
  • Max Currents (A ):
    60.00
  • Resistance ( mh ):
    5.00
  • Max Voltage ( V )
    7.00
  • Vermogen ( W)
    445.00
  • Shaft A ( mm ):
    3.18
  • Lengte B ( mm ):
    53.00
  • C Diameter ( mm )
    36.00
  • Kan Lengte D ( mm )
    44.00
  • Totale lengte E ( mm ):
    67.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Wish it came with some wires so I wouldn't have to solder.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Put this in my DB01 4WD buggy and it is a seriously quick motor, maybe not as quick as the equivalent from one of the big brands but then it is also about a third of the price. My only complaint is that it has fixed timing but when you have this much power does it really matter? I would definitely recommend this to anybody who wants a cheap mod motor for racing, but only when your motor is in-board as the ventilation holes could pose a problem for rear mount motors in buggies such as TRF201 or B4.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent motor!!! Use it on my Tamiya F103GT 2wd. Esc was Turnigy Trackstar 60A, Lipo Turnigy 4000mah 2s hardcase, gear at 3.61. After 15min run everything is only slight warm to touch!
The motor is so quiet when running, motor start smooth with minimal cogging in sensorless mode. Good construction and strong magnet. Thanks Hobbyking!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Drive it on the HPI Sprint 2 with HK 100A sensor, it is worth every cent. Cheap and strong, works well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Have this on my TC4 with the 60A esc, goes like stink. runs very cool and makes theold 5700KV i had in there look like a toy
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Easy to solder, solder took to the cups very easily. The actual colour of the motor is not black as the picture leads to believe, it's grey. Bench runs fine with the sensored 60A car esc in sensored mode.



It's build construction is excellent and very clean with access to both end bearings to add some scorpion oil when needed without having to open it up. Hand turning the shaft suggests a very strong magnet.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.