Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

XK4060-1500KV borstelloze Inrunner

XK4060-1500KV borstelloze Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
426 g
SKU:
XK4060-1500KV
Product
Omschrijving

XK4060-1500KV borstelloze Inrunner

Specs.
Max Amps: 55A
Max Volt: 14,8 V
Max Watts: 815W
Rpm / V: 1500kv
Resistance: 0,0214 ohm
Onbelast Current: 0.8A (7.4V)
Afmetingen: 39.8mm x 59.8mm
Montagegat diepte: 7mm
Lengte van de uitbreiding van As: 18mm
Shaft diameter: 5mm
Gewicht: 285g

Product
Specifications

Aanvullende Informatie

  • Sku:
    XK4060-1500KV
  • Brand:
    Nvt
  • Gewicht ( g)
    426.00
  • Lengte
    161.00
  • Breedte:
    63.00
  • Hoogte:
    80.00
  • Kv ( tpm / v )
    1500.00
  • Max Currents (A )
    55.00
  • Vermogen ( W):
    815.00
  • Lengte B ( mm ):
    60.00
  • Kan Lengte D ( mm )
    54.00
  • Max Voltage ( V )
    15.00
  • Shaft A ( mm ):
    5.00
  • Unit Weight (g):
    285
  • C Diameter ( mm )
    40.00
  • Totale lengte E ( mm )
    77.00
  • Resistance ( mh ):
    21.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
i got this motor yesterday in the mail ..""""" packaging is not flash """"" ignore that """,,, hooked it up to the 120 HK ESC i also got .... used the HK 150 car program card to adjust a few settings then out for a test in my Himoto buggy on 4s 5000... let me say this is the best set up i have ever had in this buggy" ITS FAST " .... although its 1500 kv it still gets a bit hot when bashed for 10 mins with motor timing on high .. so i put that back at the default setting ....... 5 crowns all round .. thanks HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor for the new Changesun 90mm 12 blade fan! The case needs some sanding to fit the 39mm shroud which was done in minutes on my belt sander. On 6S this motor draws 83A/1900watts stabilized. I added HK cooling fins (made for 36mm motors but fit this as well) and the motor temps were very reasonable at about 150F max after extended running at WOT.
I did notice the large allen screws holding the end cap did not have any locktite so some was added to each screw. The small screws on the other end were secured properly and no locktite was needed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Foto misure distanza fori fissaggio motore

google traslator

Photo measures distance engine mounting holes

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ottimo motore caratteristiche da verificare
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Running this motor in a 2,3m glider of 1,5kg on 2S with a 14x10 folding prop more than enough power for many quick climbouts.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.