New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

XK5692-540KV borstelloze Inrunner

XK5692-540KV borstelloze Inrunner

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
XK5692-540KV
WANT FREE SHIPPING? Click here to find out more!

XK5692-540KV borstelloze Inrunner

Specs.
Max Amps: 88A
Max Volt: 29.6V
Max Watts: 2600W
Rpm / V: 540kv
Resistance: 0,0241 ohm
Onbelast Current: 1.2A (15V)
Afmetingen: 55.8mm x 92mm
Montagegat diepte: 8mm
Lengte van de uitbreiding van As: 20mm
Shaft diameter: 6mm
Gewicht: 895g

  • Sku XK5692-540KV
  • Brand -
  • Gewicht 1158.0000
  • Lengte 0.00
  • Packaging Width 0.00
  • Hoogte 0.00
  • Kv ( tpm / v ) 540.00
  • Max Currents (A ) 88.00
  • Resistance ( mh ) 24.00
  • Max Voltage ( V ) 30.00
  • Vermogen ( W) 2600.00
  • Shaft A ( mm ) 6.00
  • Lengte B ( mm ) 92.00
  • C Diameter ( mm ) 56.00
  • Kan Lengte D ( mm ) 85.00
  • Totale lengte E ( mm ) 112.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a good motor and the biggest inrunner I have seen. I am planning to put it on a pylon racer to replace a .90 fs engine. This motor has the power equivalent of a 20-35cc engine. I am using an 8mm prop adapter that fits a 6mm shaft and it turns props well. Aircraft ESCs have a little trouble getting it started especially with large diameter props. It turned an 18x8 wood prop on a 4s lipo at 70Amps at almost full throttle. This is the biggest prop it can/should turn. I also tested a 12x10, 12x12e, and 11x14 all reached 72A on 6s lipo. I might use 8s lipo only for short bursts of speed to keep the amps in a safe range. I am hoping for speeds from 120-170mph. I will add comments later when I get the plane ready.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a good motor and the biggest inrunner I have seen. I am planning to put it on a pylon racer to replace a .90 fs engine. This motor has the power equivalent of a 20-35cc engine. I am using an 8mm prop adapter that fits a 6mm shaft and it turns props well. Aircraft ESCs have a little trouble getting it started especially with large diameter props. It turned an 18x8 wood prop on a 4s lipo at 70Amps at almost full throttle. This is the biggest prop it can/should turn. I also tested a 12x10, 12x12e, and 11x14 all reached 72A on 6s lipo. I might use 8s lipo only for short bursts of speed to keep the amps in a safe range. I am hoping for speeds from 120-170mph. I will add comments later when I get the plane ready.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!