New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Zero 95% RTF w / borstelloze motor en ESC

Zero 95% RTF w / borstelloze motor en ESC

Discontinued Product

Please continue searching for a similar product.
SKU:
Zero
WANT FREE SHIPPING? Click here to find out more!
De Zero RTF wordt compleet geleverd met borstelloze motor, ESC en alle servo's geïnstalleerd. Vergadering van de Zero vleugel, luifel en staart kan worden gedaan in 30 minuten. Voeg uw eigen ontvanger klaar voor uw eerste vlucht te zijn in minder dan 1 uur!
specificaties:
Romp Lengte: 705 mm
Spanwijdte: 850 mm
Vleugeloppervlak: 13,6 dm2
Gewicht: 375 g
Power systeem: GL-370 / DS (1: 5: 3)
Propeller: EP-1047 / EP9070
Batterij: 3 cellen 11,1 V - 1000mAh Li-Po

inbegrepen:
Motor: 2826 borstelloze motor outrunner
ESC: 25A
Servo's: 3 x 9g
Lithium Polymer batterij
  • Sku Zero
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht 2380.0000
  • Lengte 0.00
  • Packaging Width 0.00
  • Hoogte 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very nice flying model. Good power, no nasty habits.

Loops both inside and outside from level.

Roll rate is very good. Spins better inverted than upright - it just doesn't want to stall upright.

Looks very nice in the air blasting around :)



A few minor points:



- The LG is very weak. Ripped out on the first hot landing. Looks better in the air without it anyway.

It did ROG from grass with no trouble and did nice touch and gos before I came in too hot.



- The pushrods were not supported in the fuselage. A chunk of foam and some epoxy fixed that



- CG is not shown. I added about 1 ounce of weight in the front of the cowl.



- The spinner is not well balanced. Just leave it off and the power system is turbine smooth

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice flying model. Good power, no nasty habits.

Loops both inside and outside from level.

Roll rate is very good. Spins better inverted than upright - it just doesn't want to stall upright.

Looks very nice in the air blasting around :)



A few minor points:



- The LG is very weak. Ripped out on the first hot landing. Looks better in the air without it anyway.

It did ROG from grass with no trouble and did nice touch and gos before I came in too hot.



- The pushrods were not supported in the fuselage. A chunk of foam and some epoxy fixed that



- CG is not shown. I added about 1 ounce of weight in the front of the cowl.



- The spinner is not well balanced. Just leave it off and the power system is turbine smooth

motor : FC 28-22 Brushless Outrunner 1200kv

BEC : 25A included

Prop : 90 * 4.7



If you use FC 28-22 motor, You can use included motor mount. Nothing to change about mount.

easy to make and flying.

I changed push road for elevator and rudder because It is weak and too long.



Gliding is very good.



I suggest for biginner of warbird.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

motor : FC 28-22 Brushless Outrunner 1200kv

BEC : 25A included

Prop : 90 * 4.7



If you use FC 28-22 motor, You can use included motor mount. Nothing to change about mount.

easy to make and flying.

I changed push road for elevator and rudder because It is weak and too long.



Gliding is very good.



I suggest for biginner of warbird.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!