Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global

Zlín-42 Glow / Balsa 1650mm (ARF)

Zlín-42 Glow / Balsa 1650mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
5135 g
SKU:
Zlin-4260
Product
Omschrijving

De Zlin-42 is een Tsjechisch gebouwd tandemzitting trainer die wordt gebruikt voor VFR training, basic instrument training en ook als een zweefvliegtuig sleepboot, het type zag ook dienst bij voormalige Oostblok luchtmacht als trainer. De Zlin-42 werd ook gebruikt als een fundamentele aerobatic trainer en zag zelfs een aantal gevechten in Sri Lanka!

Dit is een mooi aangelegd en enorm praktische, echte wereld, elke dag sport fly model die zal duren al jaren. De robuuste driewieler onderstel maakt de Zlin 42 gemakkelijk te hanteren op de grond en staat de behandeling van bijna elke strip. De afneembare 2 pct plug in vleugel zorgt voor gemakkelijk transport en snelle montage gebied, eveneens, de massale kap biedt een gemakkelijke toegang en maakt ook de Zlin een ideale kandidaat voor een elektrische conversie. De hardware is allemaal topklasse en heeft een brandstoftank en motorsteun. De bekleding is in de eerste klasse en het kleurenschema ideaal voor oriëntatie.

De robuuste maar lichtgewicht constructie van dit model zorgt voor een uitstekende sport fly model dat zal veranderen in een paar acrobatische moves wanneer u het wilt, maar de royale afmetingen, dik vleugel en lichte vleugelbelasting geeft u een model dat is equaly gelukkig langzaam gevlogen zonder dat uit vorm. Dit is een mooie grootte, echte wereld sport fly model dat kan worden genoten wanneer alle hanger koninginnen veilig weg verscholen en het feit dat het kan worden gebouwd voor echte wereld geld is een goeie bonus!

specs:
Spanwijdte: 1650mm
Lengte: 1360mm
Wing Gebied: 43dm2
Flying Gewicht: 3100g
4 Channel, 5 servo (niet inlcuded)

vereist:
Uw eigen 4-kanaals TX / RX
0.46 gloed motor of elektrische gelijkwaardig
5 x standaard servo
RX batterij
60mm Spinner

Product
Specifications

Aanvullende Informatie

  • Sku:
    Zlin-4260
  • Brand:
    Nvt
  • Gewicht ( g)
    5135.00
  • Lengte
    1080.00
  • Breedte:
    310.00
  • Hoogte:
    360.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very good model, good quality. Obviously is an ARF so it will require a bit of work (lets say 3 or 4 evenings, depending on your abilities).

Configuration:
Servo: 4 x http://www.hobbyking.com/hobbyking/store/__39340__HXT_6_9kg_39_2g_16sec_Twin_bearing_Digital_Servo_EU_Warehouse_.html
Engine: 1 x http://www.hobbyking.com/hobbyking/store/__39962__Turnigy_Aerodrive_SK3_4240_740kv_Brushless_Outrunner_Motor_EU_Warehouse_.html
Controller: 1 x http://www.hobbyking.com/hobbyking/store/__35380__Turnigy_dlux_70A_SBEC_Brushless_Speed_Controller_w_Data_Logging_EU_warehouse_.html
Engine mount: http://www.hobbyking.com/hobbyking/store/__5283__HXT_Alloy_Composite_Firewall_Mount_110_45mm_.html
Battery: 1 x http://www.hobbyking.com/hobbyking/store/__35811__ZIPPY_Flightmax_5000mAh_4S1P_30C_EU_warehouse_.html
Propeller: 1 x http://www.hobbyking.com/hobbyking/store/__60473__APC_Style_Propeller_13x6_5_EU_Warehouse_.html

Flight abilities:
For sure is not hard to flight and to land but obviously it is not stable as a high wind (e.g. Piper Cub). I would recommend the model for those who have at least a bit of experience in flying RC models.
It requires some exponential on ailerons, I've set 50pcnt on my futaba T7C (double ailerons configuration, i.e. each aileron servo to a single channel).
You can use ailerons as flaps as well but in my 3 flights I had so far I couldn't appreciate a proper advantag
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is my first glow plane, the engine is a .55 2 stroke with a 12x8 prop, i put 5 Corona ds399hv servos, whit a selfmade adapter plate because these servos are smaller than the standard size ones; so im able to use a Zippy Flightmax 1100mah 2s Life battery!
The construction is, to me, strong to absorb the engines vibration, and there is plenty of space inside the plane to put everything you need. The landing gear its good and the short front wheel helps you landing the plane. I put 110g in the tail to balance this model. The provided CG is ok, the model discends orizzontally and the landing speed is very low.
I reinforced the plywood with a mixture of epoxy and alcool and i used a lot of threadlocker in every screw. The throttle rod has no tube to pass through, so you have to find a way to ensure rigidity.
The covering, im sorry, its not so good. But for the price is ok! The model fly very well and scale, never use much rudder and the elevator is big, so never stress this plane in flight!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The flight characteristic is excellent. Landing is extremely easy, because of the slow flight ability and the short front wheel. It flies really straight : gorgeous. The engine is a four strokes ASP 10cc : that is big enough. It flies quietly and gently at half throttle : sweet. The rudder was doing flutter at high speed, so I reinforced the controls. I should have sunk the rod in the rudder with tons of glue. To fix this, I screw firmly a small plate on both sides of the rudder in order to hold the control rod in place (hope that s clear). I put an APM to do navigation with GPS, it worked instantly : great. I brokes the canopy glass twice, and fixed it with usual tape ; that s ok.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
crashed mine today into a dam broke the canopy and the coal don,t see them in spare parts ?????? are they available
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Looks fantastic, second landing under carage broke clean off still connected to a section of fuselage, have fixed with fibre glass in four key points, good and strong now, should have beefed up before 1st flight to save the mess. my advice is keep as light as possible don't over motor and bat. Love it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Looks great, flies great, only down side is weak under carriage make sure you beef it up before you fly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nose gear and low and needs to be revised for future sales, other components are fine and quality is mid high finishing and can be improved.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A real wide-body single which gets a lot of attention at the field. I used a ASP 91 four-stroke and wouldn't recommend going less. It actually flys very well for a scale type plane. Easy to handle and makes nice landings. I had to work with the nose gear and finally made a new one. The included one is too short and gives a clearance problem with the prop due to negative angle (AOA) while taxi on anything but perfectly smooth surface.

A bargain price and it makes me smile to look at and fly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
trs bon modle,vols parfaits,attention verrire trs fragile,et renforcer couple fixation pour un moteur 4 temps
trs raliste
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
excellent modle ,vol trs realiste,motorisation 10cc 4 temps, plus que suffisant , accro que bien ,mais pas 3d, seulement raliste, attention de renforcer toutes le bois fixation moteur avec colle epoxy car un peu faible construction pour moteur glow,sinon ce model est un vrai rgal et je le rpte aucun dfaut en vol,sincrement mrite 5 toiles,de la part d'un modliste de 40 ans d'exprience
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Zlin

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.