Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

US$ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Zlin Z-50L 1612mm 0,70 klasse (Glow / EP) Sport Scale (ARF)

Generating Links

Zlin Z-50L 1612mm 0,70 klasse (Glow / EP) Sport Scale (ARF)

Prijs:

Now save bespaar US$ 0,00 US$ 0,00

US$ 183,68
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
049000007
Geen verzendkosten? Klik hier meer leren!

De Zlin-Z50 is een top kwaliteit en zeer geschikt aerobatic model dat is uitzonderlijk schaal, ontworpen om te accepteren ofwel gloeien of elektrische stroom, de Zlin is de perfecte club size model, gemakkelijk te vervoeren en in het veld te monteren, maar toch groot genoeg om echte presense hebben in de lucht en op de grond.

Het eerste wat je opvalt aan de inspectie is de uitstekende bouwkwaliteit, de Zlin is uitzonderlijk goed ontworpen en gebouwd, biedt het een zeer laag vliegende gewicht zonder concessies te doen aan duurzaamheid, bijvoorbeeld, heeft de verticale stabilisator gemaakt van glasvezel naar bestand zijn tegen de door de omvangrijke liften, zelfs wanneer deze wordt ingedrukt door de meest straffen acrobatische manoeuvres stam. Het andere ding dat opvalt is de omvang look van de Zlin, modellen van deze klasse zijn vaak plak zijdige met weinig aandacht voor detail, maar niet de Zlin. De bekleding is fantastisch als de finish verf op de schoorsteen, wordt de 1 pc vleugelbout voor gemakkelijk transport en de meegeleverde hardware 1e klasse. Andere aanwijzingen van de pure kwaliteit van deze kit zijn de juiste luifel luik, de meegeleverde instrumentenpaneel en de omvang stutten voor de horizontale stabilisator.

Door een combinatie van een laag gewicht, gul stuurvlakken, uitzonderlijke bouwkwaliteit en geweldig design, de Zlin voert elke duim zo goed als het eruit ziet. Een zeer schaal aerobatic model van deze kwaliteit en klasse is een zeldzaam ding en al van de gecombineerde kenmerken van deze geweldige Zlin voor deze prijs zijn ongehoord ........ tot nu toe!

Kenmerken:
Uitzonderlijke bouwkwaliteit en bekleding
Mooi gedetailleerd schaalmodel
Uitstekende prestaties aerobatic
Afneembare vleugel voor gemakkelijk transport
Kwaliteit hardware geleverd
Robuuste brede rupsen voor een uitstekende grondafhandeling
Glasvezel verticale stabilisator
Ontworpen voor gloed of elektrische stroom
Pull / pull roer en de bal gekoppeld regelstaven

specs:
Spanwijdte: 1612mm
Lengte: 1403mm
Droog gewicht: 1672g
Flying Gewicht: 2350g
Wing Gebied: 46.4dm2

vereist:
Uw eigen 4 ~ 6-kanaals TX / RX
4 ~ 5 standaard servo's
50mm Brushless Outrunner Motor of 0,70 gloed motor
3300mAh ~ 4500 5s LiPoly Battery
70mm Spinner
60A ESC
RX Battery of UBEC

  • Spanwijdte ( mm ) 1612.00
  • Turnigh Zlin 70e
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

James H | Geverifieerde koper

  • Overall
  • Quality
  • Value

This airplane with the 20 size gas engine is one real nice flying airplane.The 20 size gas it just hangs their. the first time i flew it,i just could not get over how positive it handles.Truly a nice airplane.I just purchased another one and a seventeen s

Mar 13, 2018

This airplane with the 20 size gas engine is one real nice flying airplane.The 20 size gas it just hangs their.The first time i flew it,i just could not get over how positive it handles.Truly a nice airplane.I just purchased another one and a seventeen size gas engine?

solentlife | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 17, 2016

I now have two of these Zlins ... first set up with RCGF 15cc gasoline engine and 15x4 prop. Brilliant and perfect balance at 3.1KG. The second has a Turnigy 5055 400KV motor with 6S 3300 LiPo, 80A ESC, 15x10 MAS prop.
So the E-Powered version : The setup draws 52A at full throttle and with a static thrust of over 4.2kg for an all up weight to fly at 3.0kg. CoG sits at 124mm from L/E which is still a safe position. I have a 1700 2S LiFe pack powering the high torque Henge servos. Being electric allows a higher pitch prop - the performance is simply amazing. Its an attraction wherever she goes, not being the usual Sbach / Extra model. I do have an A3 Super II unit fitted in her for those bad weather days - but in reality - she does not need it. On this 5055 / 6S setup - she cruises on half throttle. Which is better ? Gasoline or E version ? Very hard to choose ... the gasoline version has the sound and grunt, the e version is just so easy to get to flight. The E version just edges the win ...

solentlife | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Sep 28, 2016

I am now setting up my E-Power version to sit alongside my Gasoline one. Turnigy 5055 450KV, 80A ESC, 6S 3300 30-40C Blue Turnigy LiPo .... with 15x8 prop. I am aiming to match the AUW of my gasoline job at 3.09Kg and which has perfect CoG balance at 120mm. The AUW given in description above is impossible to meet. It would also create a very tail heavy model if you could.
I have replaced the main wheels with slightly larger lightweight 3" real rubber ones to give better grass run and less bounce.
The 5055 motor needed shaft reversing and also 10mm blocks to move it forward to clear spinner on cowl. 70mm alloy backplate spinner is perfect.
Decals shown in photo on this page are wrong. The main EC-DLX on fuselage should be more forward with rear clear canopy line setting the start mark. The medium sized Z-50L should use front clear canopy line as start. I will upload a scale sheet depicting of Zlin 50's including this one. The real Zlin has no Zlin Z50L on the tail.

solentlife | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 11, 2016

This model needs weight up front if you go with recc'd E or Glow power. My Zlin was fitted with RCGF 15cc gasoline engine and she balanced perfectly.
Items : 240ml tank, 2S 1800 LiFe Rx pack, 15x4 Wood Prop, standard servos all round.

Marvellous flyer and later I added a Hobby eagle Super II gyro system which brought this Zlin into 3D world fully. On the RCGF and 15x4 - she would prop hang as long as fuel was there !
Sadly I was aerobating her one day and got too close to ground, banked her for another pull-up and tip dug in and she cartwheeled. Rebuilt her and then had a dumb thumbs moment over tarmac runway. Rebuilt her again but when I saw stock again here in EU - I bought another. Looks like I grabbed last one.
This is a really good flyer and anyone with reasonable ability can fly her. Get comfortable with her, up the rates and have a ball !
Definitely a machine to love in looks and ability.

solentlife | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 27, 2015

Thjs is a sweet airplane but balance needs to be on the button. The RCGF gasoline engine 15cc balances her perfect. Watch the maiden flight ... engine still running in - so no heroics yet ! But once dialled in - she will surely perform well.

https://www.youtube.com/watch?v=MWp2jQsGvh0

solentlife | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 15, 2015

Nicely double boxed. Very mice looking model. Covering a little slack in places where not tacked down ... but quick iron over and fine.
Fuel tank and parts not included ... also tail wheel bracket not included but wheels and legs are.
The rudder pull-pull guides are in place back in the tail ... shine a light down there and you can see them. I used the long elevator rod to pass through the guides to puncture the covering from inside ... otherwise you cannot find them.
Make sure you pass the elevator joiner through before fitting fixed tail-plane !
I think main wheels a touch small ... so may put slightly larger.
I fitted a RCGF 15cc engine ... but only way to fit is to have inverted, as the stand-off mounts conflict with motor box dove tails.
Once completed will maiden and link a video.

solentlife | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 13, 2015

Unboxing post :
Now received the kit ... noted that a few parts missing from listing in manual ... this partly explains price reduction. I have CF landing gear from HK for 120 size model ... should be ok fit instead of the Alloy - need to reduce weight if possible due to using 15cc gasoline engine. Noted that elevator is single servo and rod link at tail end .. not too happy about this ... may see about twin servos instead.

Mark | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 06, 2015

Very good plane-bad accident..can someone tell me where I could find
a cowl and a cockpit?Thanks very much.

ron57 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 03, 2015

Mooi toestel alleen de linkjes vindt ik wat slechte kwaliteit.
De maximale uitslagen zoals aangegeven zijn niet haalbaar.

Richard | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 08, 2013

Had this a while now so I thought I would share my maiden with you, we'll, is was non eventfull, took off in 10mph winds as straight as a dye.
2 clicks of down and 1click of right and it was flying hands off!.
This plane is fantastic, the build quality is great and the covering also.
I ended up buying an Asp91 from HK for this and it pulls it round fantastic with unlimited vertical, a great combo.
This will do all the tricks in the book, you will not be disappointed.
Richard

  1. 1
  2. 2
Klantbestanden
Zlin 50l waiting for correct spinner Download [2059]
Zlin with proper spinner Download [778]
Scale drawings of Zlin Z50L - various Download [141]
EC-DLX real photo 001 Download [243]
Real Z50L photo 2 Download [38]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!