2040 Brushless Inrunner Motor 4800kv

• Overall
• Quality
• Value

Awesome.

Jan 17, 2017

SUPERB motor. Works great as an alternative to the 20mm Ammo inrunner by Great Planes (actually faster!).
Suitable for 55/56mm and 64mm EDF units. I'm running one in an Electrifly Synapse and a 64mm CS 12b (20mm motor) bought from HK! Reallllly fast light EDF setup for under £20!

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 05, 2016

I've used this motor on a 1/16 Rally extreme/Drift conversion. Compared to the stock motor that comes with the car, this is about 3mm shorter. It provides the same kinda power and you're able to still use the stock 2.3mm pinion gear. this item comes in a nice padded box with the female bullet connectors as described. Would buy again!

• Overall
• Quality
• Value

Customer Rated

Aug 28, 2016

This little motor is fast! I bought this to replace a DOA motor on the Turnigy 4WD Brushless Rally Extreme. This is a good bit faster than the stock motor. Install was same as stock, easy. Only negative, and I think this is more of a norm for all motors this powerful but this small.. it gets really hot. I've ordered a heatsink for it to help with the heat. Running this with a 2S Turnigy Nanotech 30-70C 2200mAh pack LiPo pack. Very punchy. If it wasn't on backorder I'd grab a couple more.

• Overall
• Quality
• Value

Customer Rated

Jun 22, 2015

fitted in my 1/16th brushless buggy fits really well buggy is now an absolute animal wheelies straight on to its back even at half throttle takes the little buggy to around 35-40mph. motor does get rather hot after 1 2200mha 3s lipo. having said that I did thrash it lol kept coming back for more 5stars from me

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 28, 2014

buon motore x 2 s lipo

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 02, 2014

This motor is huge.It is listed under 28mm but is 540 in length and very heavy.It has mounting holes and thread size to fit most 1/16th and some 1/18th scale motor mounts but it needs lots of space.I i currently run it in a turnigy extreme rally car with a 17th pinion with 80amp esc and 2x 1700mah turnigy lipos for speed runs.A good powerful motor if you can utilize it :)

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 09, 2014

Excelente reemplazo para el motor stock del 1/16 buggy

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 06, 2013

powerful motor , but the shaft is not that great , it came off when i applied power to my edf .... not a great thing having a fan spinning across your shed

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 03, 2013

fit nice for 50mm fan & good power too

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 11, 2013

bought as spare for 1/16 monster beatle