Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

3W LED azul tira de liga 120 milímetros x 12 milímetros (3s Compatible)

3W LED azul tira de liga 120 milímetros x 12 milímetros (3s Compatible)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
10 g
SKU:
371000073
Descrição
do

3W LED azul tira de liga 120 milímetros x 12 milímetros (3s Compatible)

especificações:
Dimensões: 120 x 12 milímetros
Peso: 7g
Conector: JST
ângulo de feixe: 120 graus     
Potência: 3W
temperatura de cor: 460-465nm
Tensão: 11.1V-13.5V (3s LiPoly)
Atual: 280mA
Fluxo luminoso: 240-270LM
Cor índice de renderização: 70-85
Material: placa de alumínio
Vida útil: 50.000 horas
Temperatura de funcionamento: -20 - +60 graus Celsius

* Nota: certifique-se de consumo de corrente é inferior a 280mA ou corre o risco de danificar a faixa de LED
Product
Specifications

Características do Produto

  • SKU:
    371000073
  • Brand:
    Não
  • Capacidade ( mAh)
    Não
  • Peso ( g )
    10.00
  • Comprimento:
    130.00
  • Largura:
    5.00
  • Altura
    20.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
produit une forte lumi?re bleu visible de loin, excellent pour les course fpv bonne visibilit? des autre quad a travers la camera
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using a programmable light controller with these. PWM creates cool pulsing and fading effects. Can't say what it is cause it's not available from HK. Just a thought on their versatility.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These came and they only run off of the full 3S Li-Po voltage. They looked great at first but now one of the individual LEDs on one strip and two on the other strip have gone out. I hope this is all that are going to go out, or this will be a waste of money.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello, I received my LED bar bleu.le JST connector connected backwards but weld properly. the right connection is nothing on. I tested all in all directions nothing to report. I contacted chat he told me to post two photos, but the last two days that I try it tells me that the HK server will not boot ... how to get a refund?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
you can see thse from a mile away. Careful with polarity. some are wired backwards in the JST connector
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
wires where around the wrong way and strangely 1 came with some small electronics thing on it with capaciter and chip
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good Quality, extremely bright! If you have proper cooling, this is a very good product for your multicopter or helicopter. There must be direct propwash to the led, otherwise they heat up and melt... running them on 11.1V (3S lipo), works just fine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These get soo hot after only 10 seconds on a 3S lipo... they will literally melt your skin. Had planned to put them under the arms of my F450.... but think I'll pass. Waste of time and money.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.