New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Ferramenta de corte de 45 graus para Espuma e Balsa

Ferramenta de corte de 45 graus para Espuma e Balsa

Shipped From:
  • USA
QTY:

Now save guardar 1,43 € 1,43 €

Special Price 3,49 € 3,49 €

You save guardar 1,43 € 1,43 €

Was  4,92 €

Estado:
Disponível
SKU:
9171000204
WANT FREE SHIPPING? Click here to find out more!

Esta ferramenta de corte de 45 graus é um deve ter para a caixa de ferramentas de qualquer modelador ou bancada de trabalho! Com esta ferramenta acessível, você pode cortar um ângulo perfeito de 45 graus com facilidade. Basta ajustar a largura para atender qualquer que seja a sua corte (2 ~ espessura 10 milímetros), e deslize-o através da ferramenta. Isto é perfeito para o corte de 45 chanfros grau de espuma ou de balsa superfícies de controle para seus aviões!

Construído de liga de alumínio, este gabarito é leve e durável. Todo o hardware necessário está incluído, bem como uma lâmina. Este item requer montagem.

  • SKU 9171000204
  • Brand -
  • Capacidade ( mAh) -
  • Peso 68.0000
  • Comprimento 60.00
  • Packaging Width 20.00
  • Altura 45.00
  • Foam Cutting Tool
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Im Prinzip tolles werkzeug, mitgelieferte Klinge ist einfach unterirdisch und muss direkt ersetzt werden, dazu ben?tigt man eine gute Rasierklinge und eine Dremel, danach einfach toll

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Im Prinzip tolles werkzeug, mitgelieferte Klinge ist einfach unterirdisch und muss direkt ersetzt werden, dazu ben?tigt man eine gute Rasierklinge und eine Dremel, danach einfach toll

O my god 8 month 2016 and still as below.. good idea but holes not tapped down enough for screws provided. Cmon HK this is very poor, a little quality control or assemble them before you send them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

O my god 8 month 2016 and still as below.. good idea but holes not tapped down enough for screws provided. Cmon HK this is very poor, a little quality control or assemble them before you send them.

No sirve, las barrenaciones para los tornillos estan mal hechas, no se puede armar y no sirve de nada

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No sirve, las barrenaciones para los tornillos estan mal hechas, no se puede armar y no sirve de nada

I love it mine worked great no problem with the screws . I use it on foamboard from dollartree stores Have built 7 planes so far using it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I love it mine worked great no problem with the screws . I use it on foamboard from dollartree stores Have built 7 planes so far using it

This is a pile of crap! Holes are not tapped deep enough so you cannot even assemble it properly. CS were not interested in me returning the 2 faulty products so in the bin they went. If you really want to give this a go, buy it off their eBay shop so you can return it without fuss when you find you can't use it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a pile of crap! Holes are not tapped deep enough so you cannot even assemble it properly. CS were not interested in me returning the 2 faulty products so in the bin they went. If you really want to give this a go, buy it off their eBay shop so you can return it without fuss when you find you can't use it.

very fiddly to put together,but well made,would have been nice if there was a line or mark to show 45 degrees. had to put one on myself. works ok for putting a bevel on planking etc, dont buy it if you are the impatiant type,slow and steady is the way with this tool

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very fiddly to put together,but well made,would have been nice if there was a line or mark to show 45 degrees. had to put one on myself. works ok for putting a bevel on planking etc, dont buy it if you are the impatiant type,slow and steady is the way with this tool

#1: No instructions. Had to use product photos on HK website.

#2: None of the holes are drilled/tapped deep enough, so none of the included screws fit tight. Hence, the tool cannot be assembled and used.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

#1: No instructions. Had to use product photos on HK website.

#2: None of the holes are drilled/tapped deep enough, so none of the included screws fit tight. Hence, the tool cannot be assembled and used.

Before I bought it, I read all the bad reviews, of course. So what? People always complain. It cannot be that useless, I thought, right?
This item is not just a joke, this is insult!
It cannot be in any use whatsoever!
Screws not just will not go through, but none of them would even fit to one of two holes on the main blade holder!
The only thing you can do is to epoxy parts together. However you will be better off epoxying blade to a plywood.
Stay a way of this item, trust people who took time to write a review.
If you bought it, request a refund. Does not matter it costs nothing. Matter of principle.
The quality of the item too far outrageous.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Before I bought it, I read all the bad reviews, of course. So what? People always complain. It cannot be that useless, I thought, right?
This item is not just a joke, this is insult!
It cannot be in any use whatsoever!
Screws not just will not go through, but none of them would even fit to one of two holes on the main blade holder!
The only thing you can do is to epoxy parts together. However you will be better off epoxying blade to a plywood.
Stay a way of this item, trust people who took time to write a review.
If you bought it, request a refund. Does not matter it costs nothing. Matter of principle.
The quality of the item too far outrageous.

Took a little bit of assembly as there is no instructions but a quick look at the Pictures on the web site and away we go. Build quality is pretty good two of the screw holes were not deep enough but a little machine oil and use of one of the longer screws soon had them tapped out deeper. only used on 6mm epp foam so far but performed as well as I expected it to.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Took a little bit of assembly as there is no instructions but a quick look at the Pictures on the web site and away we go. Build quality is pretty good two of the screw holes were not deep enough but a little machine oil and use of one of the longer screws soon had them tapped out deeper. only used on 6mm epp foam so far but performed as well as I expected it to.

TOTAL SCRAP, screws not tapped deep enough. Chops its way though foam. Review not long enough, take this XXXXXXXXXX XXXX XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXX X X XXXXX XXX XXXXXXXX XXXXX XXXXXXX XXXX XXXX XXX X X X X XX X XX X XXXXXX

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

TOTAL SCRAP, screws not tapped deep enough. Chops its way though foam. Review not long enough, take this XXXXXXXXXX XXXX XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXX X X XXXXX XXX XXXXXXXX XXXXX XXXXXXX XXXX XXXX XXX X X X X XX X XX X XXXXXX

Customer files
Manual - 45 Degree Cutting Tool for Foam Download [2406]
No File Name Download [86]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking