Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

90 milímetros EDF JET w / Air retrai (versão Camo) (PNF)

Generating Links

90 milímetros EDF JET w / Air retrai (versão Camo) (PNF)

Preço:

Now save economize 0,00 € 0,00 €

250,50 €
Enviado de:
  • USA
  • International (Hong Kong)
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
177000002
Envio Grátis? Clique aqui aprender mais!

Um jato EDF muito grande que oferece excelente desempenho, grande presença tanto no ar e no solo e ser um PNF, uma compilação rápida. Há uma abundância de poder na torneira da combinação V2 1770kv / ventilador de 90mm, quando usado com um 6s Lipoly, a capacidade mosca lento também é impressionante cortesia dos retalhos pré montado, mas não é isso que este jato procurando soberba é tudo, de alta velocidade e alta manevoeverability são o nome do jogo!

Este modelo possui um tailplane todo movimento, bem como um leme e ailerons, o que combinado com a unidade EDF peso leve-sucedido e de alta pressão, devem satisfazer até o mais exigente dos pilotos. Air retrai, de boa qualidade servo de, uma gritante 100A ESC todos adicionar até um confiável e fácil de viver com grande jato. Este é um modelo EDF procurando grande tamanho emocionante que vai impressionar a todos na sua próxima reunião de clube!

Especificação:
Envergadura: 923 milímetros
Comprimento: 1436 milímetros
Carga Wing: 100g / dm2
Voar Peso: 2200g
Canal: 6ch
Motor: 1770kv 3674 Brushless Inrunner com dissipador de calor (V2)
ESC: 100A
Servo: 9 x 9 g
EDF: 90 milímetros

Requeridos:
Seu próprio 6ch Tx & Rx
Bateria 3700mah 22.2V 6S 25C

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

abagnalejr123 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 13, 2013

Warning:
The EDF unit that is supplied with the kit is brittle & will shatter in the first 3 minutes of full power use (I'd done some research and was expecting this, so purchased this kit on the understanding that it would need replacing). What I was not prepared for, however, was the sub-standard quality of the retracts and struts. The springs are not strong enough to lock the gear in the down position, hence the nosewheel collapsed on the first landing. ALSO, the struts have been "downgraded" from the ones that are commomnly found on this model. It would seem that in an attempt to save weight, to make the newer air retract units work, the nice "turned aluminium" struts I was expecting, were absent. In their place was a lightweight wire nosewheel strut, and tubular main stuts, with absolutely no spring suspension incorporated whatsoever. Completely unsatisfactory. Because of the lack of suspension, the shock forces are transmitted straight to the retract mounts, which will fail if not strengthened.

abagnalejr123 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 13, 2013

Warning:
The EDF unit that is supplied with the kit is brittle & will shatter in the first 3 minutes of full power use (I'd done some research and was expecting this, so purchased this kit on the understanding that it would need replacing). What I was not prepared for, however, was the sub-standard quality of the retracts and struts. The springs are not strong enough to lock the gear in the down position, hence the nosewheel collapsed on the first landing. ALSO, the struts have been "downgraded" from the ones that are commomnly found on this model. It would seem that in an attempt to save weight, to make the newer air retract units work, the nice "turned aluminium" struts I was expecting, were absent. In their place was a lightweight wire nosewheel strut, and tubular main stuts, with absolutely no spring suspension incorporated whatsoever. Completely unsatisfactory. Because of the lack of suspension, the shock forces are transmitted straight to the retract mounts, which will fail if not strengthened.

guitarPlaya | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2012

Maidened this morning! Excellent! Fast agile nimble. Slats and flap exciting no electronic or mechanical issue truly PNF!

guitarPlaya | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 02, 2012

OK! Got it today. Out of box. Nickle size 3mm deep divit and inside flap hinges Unglued left wing. Easy fixes. Comes. With decent instructions and CG. rugged electric retracts. Will inspect all electronics run voltage and current checks on motor and esc program esc for 3.7 cutoff voltage. Insure all servos center without chatter or buzz.set end points to conservative degrees.. Set dual rate and expo to restrictive values. For leisure maiden. Increase values for sport flying over time. Limit flight to 2mins on 4k 6s 20c turnigy flight pack

| Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 24, 2012

ok plusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplus

Martin74 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 11, 2012

- EDF broke while testing outside the plane due to poor balance of the fan, motor shaft also bend and broke

- Air retracts with air leaks (joints between tube and valve)

- Steering gear need rework its not reliable

- Poor paint finish

- Without instruction manual (cg point ? throws ? )

PeterVau | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 19, 2012

18-01-2012 Just got this Camo F-16 and it is an awesome kit and plane! Excellent painting, parts fits - a great design effort to do everything very well. This version now has air retracts, which probably work totally fine, but I will change them out to servoless (HK-312's I think). The nose gear do not use a servo on the leg, but now it is in the body and uses a pull-pull wire system for steering. The tail box blocks and collars do not bind as in earlier versions. The landing gear looks strong, it is sprung (oleo's?). It basically looks like Starmax fixed all the prior version shortfalls. If you are thinking about this plane, stop thinking... BUY it, you will love it.

Tartago | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 29, 2011

Very nice big jet.



I fly mine using a nano 5000 6s, no more than 3min or the battery will puff. the EDF is very hungry.



I changed the mini air retracts with mid size servoless retracts and now it works much better.



I needed to add a BEC because the supplied ESC is opto.

Remember to isolate/cut the red wire coming from the ESC to the Rx. I had issues due to the BEC fighting with the ESC for servo control. I almost throw away the ESC.



Flying is very easy. I even landed with just one elevator half. Better reinforce the elevator plastic bushing that secures it to the fuse. I put a strip of thin ply on top.



For landing keep some speed (20pcnt) and she will land like the real thing.



Remember to give some height to the front LG. Mine was all equal and the plane took 100' to suddenly jump into the air. I gave 1cm more and problem solved.



I installed a lighting system for the looks.

nicola | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 13, 2011

1)Consiglio non mettere i missili sotto le ali per il collaudo 2) carrelli scarsa qualit sostituire 3) spiegazioni del baricentro batteria sbagliata lento e molto pesante in volo 4) non mi sono fidato della ventola l'ho sostituita con quella della freewing. Da qui il mio giudizio negativo

Sean | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 25, 2011

Bought this (the grey one) a few weeks ago & just finished putting it together. Have not got a 6 cell yet so no ESC test but i tested the motor with a 3 cell & worked so a working motor is always good. All servos working.
No instructions on how to fill the air retracts so unsure if they work yet but look strong as its all alloy & metal.
The only real down side to this product that i can see at the moment is the wings & tail fin glue on so when its together then thats it..thats the size it stays.
Taking it for a test flight at local field in 6 days provided lipos arrive.

  1. 1
  2. 2
  3. 3
Arquivos de clientes
Manual Download [2904]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!

Acessórios