Registar

Product Finder

Definições

Useful links

 
[["US","AU","GB","DE"]]
Registar

Afro ESC 30Amp OPTO Multi-rotor Motor Speed ​​Controller (SimonK Firmware)

Afro ESC 30Amp OPTO Multi-rotor Motor Speed ​​Controller (SimonK Firmware)

Now save guardar 1,53 € 1,53 €

Special Price 10,13 € 10,13 €

You save guardar 1,53 € 1,53 €

Was  11,66 €

Indisponível!
Stock:
OUT OF STOCK
Peso:
50 g
SKU:
9192000213-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrição
do

Desenvolvido a partir do zero, nós quisemos construir uma verdadeiramente multi-rotor específica ESC que iria oferecer o melhor desempenho e valor no mercado de hoje. Nós limpou a lousa e olhou para a comunidade em busca de inspiração e ajuda na elaboração de um CES que realmente poderia ser conhecido como "O Multi-rotor ESC"

Digite Simon e Hamasaki AKA SimonK e Timecop. Esta combinação de hardware e experiência firmware em conjunto com o Hobbyking em casa equipe de engenharia nos deu a vantagem necessária para desenvolver um ESC como nenhum outro e, portanto, a série Afro nasceu.

Gozando de alta eficiência, todo o projeto MOSFET N-canal, a entrada PWM hardware livre de ruídos, e a resposta de potência suave da série ESC Afro estão prestes a mudar as expectativas dos pilotos multi-rotor em torno do globo. O navio série Afro ESC com multi-rotor software SimonK específica pré-carregado! Não há necessidade de reflash. Para maior comodidade o vinculador USB Turnigy pode ser usado através do cabo de sinal PWM para futuras atualizações de software eliminando a necessidade de gabaritos piscando complexas ou a necessidade de cortar abrir o psiquiatra do calor.

compatibilidade MikroKopter I2C também foi construído em como padrão. Uma porta DIY está disponível sob o envoltório do psiquiatra que permite utilizar o hardware ESC com MikroKopter que usa controle de I2C.

Agora Envio com OneShot125.
Algumas ações podem exigir a piscar ESC para OneShot125 via ferramenta flash referenciado nos itens relacionados

especificações:
Consumo de corrente: 30A Contínuo
Faixa de tensão: 2-6s Lipoly
BEC: N / A - OPTO
Freq entrada: 1KHz
Firmware: afro_nfet.hex
Fio de descarga / plugs: 15AWG / 3.5mm Masculino
Fio Motor / plugs: 16AWG / Mulher 3,5 milímetros
Peso: 26,5 g (fio incluído, plugue, termorretracção)
Tamanho: 50 x 25 x 11 milímetros

Royalties pagos em cada unidade vendida a SimonK e Hamasaki para o seu trabalho de design, sem o qual o Afro ESC nunca teria nascido, obrigado!

Product
Specifications

Características do Produto

  • SKU:
    9192000213-0
  • Brand:
    Não
  • Peso ( g )
    50.00
  • Comprimento
    100.00
  • Largura:
    20.00
  • Altura:
    60.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Best ESC I’ve used.
Works straight out of the packet, no flashing or calibrating wide and smooth range of throttle operation.
Great product HK definitely getting more.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great value and well working 30a esc. I had no issues with this, although I did change the firmware from from SimonK to BLHeli. I found that the esc ran the motors much smoother, but still worked fine on both sets of firmware. The esc is fairly wide, so mounting this was a little difficult on a tight frame, especially compared to some of the new esc's on the market but these work great, especially for a larger copter than can accomodate the size.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
top produkt easy to program with usb linke
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought 4 of them, using for a multirotor.The have NO HEATSINK on it an should handle 30A, as labeled...NEVER!..sorry the will burn down at the max current in a few minute.First i placed a heatsink on them,much,much better.Second thing, they selled as " with Optocoupler"..also NOT, measured the hole pcb, there is a galvanik contact from the input of the PPM-Signal(orange wire) to the controller ..below 1k..this shouldn't be.If you modify it with heatsink it's useable but i will make long duration test( around 15Min.) at 50pcnt power, if it handles, it's okay.Overall a max. of 3Crowns, cause of the missing Heatsink and no optical input.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Worked flawlessly, as to be expected of AFRO ESCs.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Also Bisher kann ich keine auffllikeiten feststellen !!!

Sind sehr gut verarbeitet und machen ordentlich druck :-D

Ganz klare Kaufempfehlung !!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These ESC fit perfectly in my Quanum XJ470 folding chassis. I have found they work very well after proper set up. Also note these do not have a built in BEC so you will need a power control board or if using in a fixed wing plane an external BEC. I own 2 quads with Afro ESC and have had no problems with them.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Initial impressions of this were good, smaller and lighter than my emax escs and the solder looks top notch. Plugged in, cal'd, and flew, these things don't get anywhere near as warm as my other 25a escs. Maybe because it doesn't have the bec but I am quite pleased. Tested the battery cutoff and it's like they were wirelessly connected because the quad just came down gently.

Note it did not flip and fall and break everything like my other escs would, just sayin.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The Best ESC at affordable price.With USB tool for future upgrading firmware.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very Nice ! - flashed with Blheli 14.0 just for the heli of it - enabled oneshot but forgot about setting PWM Damped Light braking. Using on FPVReconn 270mm, 4S, Cobra 2100KV, 6x4.5 - Wow! Impress your friends :>) These ESC's don't even get warm! Also recently purchased the Afro 20 Opto Race...those are great too, and I remembered active breaking - Warpquad is going to be a blast.

Oh..just use the orange signal wire to the naze32 and cut back the black ground - measured 0-ohms from black to black on esc - have not had any signal problems using this method.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.