New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

AfroFlight Naze32 REV5 Acro FunFly Controller - versão Soldado (Horizontal Pin)

AfroFlight Naze32 REV5 Acro FunFly Controller - versão Soldado (Horizontal Pin)

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000579-0
WANT FREE SHIPPING? Click here to find out more!

O Naze32 popular é aqui! Inicialmente projetado para uso com pequenos para artesanato multirotor médio porte, tornou-se o go-to controlador para uma série de projectos Multirotor e propheads.

O infame "Timecop" Hamasaki AKA não estava feliz com as limitações e desempenho de 8-bit MCU poderia entregar em plataformas FC atuais, então ele decidiu fazer um controlador de vôo que poderia tomar apenas sobre todas as demandas de um desenvolvedor poderia jogar nele, e assim nasceu o Naze32. No coração do Naze32 é um 32bit ST cavalo micro trabalho de um processer, com a memória inexplorado e poder cpu e uma série de sensores igualmente impressionantes. O Naze também é compensada com alguns dos mais bonitos programas e funcionalidades GUI para obter o máximo proveito de sua configuração.

O Naze32 vem como a versão Acro mais completo ainda, com as duas pré-soldadas 90deg pinos para sua preferência e um sair arnês correspondido.

A versão HobbyKing está totalmente autorizado e royalties são pagos para o desenvolvedor em cada Naze32 vendido.

Características:
• saídas do motor flexível, sustentação de vários tipos de estruturas:
Quad / Hexa / Tri / Bi / Y4 / Y6 / Octo / Camera cardan. (O padrão é Quad-X)
• Até entrada RC 8 ch - suporta receptores padrão (PWM), receptor PPM Sum (FrSky, etc), ou receptores de satélite Spektrum.
• Construído em FrSky telemetria inversor (principal porto / w compartilhada)
• monitorização da tensão da bateria
• processador de 32 bits Modern rodando a 3,3 V / 72MHz (STM32F103CB).
• MicroUSB bordo para instalação e configuração
• LEDs tão brilhante, que poderia cegá-lo
software de configuração • baseada em MultiWii para fácil instalação
• Pré-Soldado Pin para plug and play
hardware REV5

especificações:
36x36 mm (30,5 milímetros de montagem)
5.3 gramas (sem cabeçalhos, 7,3 gramas com)
2000 graus / segundo de 3 eixos MEMS giroscópio + acelerômetro (MPU6050)
Tensão de entrada: Max 16V no trilho de entrada e até 35V 6s na linha de detecção de tensão

Incluído:
Naze32 REV5
cabo breakout 1x RC

Baixar manual de usuário para REV5

software de configuração - Chrome Baseflight Configurator (preferencial)
https://chrome.google.com/webstore/detail/baseflight-configurator/mppkgnedeapfejgfimkdoninnofofigk

Também é possível usar 2.3 ou mais recente versão do MultiWiiConf (Java-based) de http://code.google.com/p/multiwii/downloads/list .

O software é open-source! repositório de código em
https://github.com/multiwii/baseflight

  • SKU 9171000579-0
  • Brand Other
  • Capacidade ( mAh) -
  • Peso 32.0000
  • Comprimento 70.00
  • Packaging Width 30.00
  • Altura 70.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Naze32 as always is super. Working perfect for my zmr180 quad on betaflight.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Naze32 as always is super. Working perfect for my zmr180 quad on betaflight.

BE WARNED

This can be an awesome flight controller but every time Ive got one it comes to me faulty

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

BE WARNED

This can be an awesome flight controller but every time Ive got one it comes to me faulty

tres bonne carte sur un drone racer 250

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

tres bonne carte sur un drone racer 250

Been flying my home-made quad 3 weeks with this controller and i love it !
I flashed Cleanflight on it and quickly got up to speed with the configuration.
Very stable once properly setup and calibrated !

If you want to save yourself some hassle on a custom frame without a pre-determined flight controller place, buy the acrylic protection case, it's almost impossible to mount it flat without it XD

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Been flying my home-made quad 3 weeks with this controller and i love it !
I flashed Cleanflight on it and quickly got up to speed with the configuration.
Very stable once properly setup and calibrated !

If you want to save yourself some hassle on a custom frame without a pre-determined flight controller place, buy the acrylic protection case, it's almost impossible to mount it flat without it XD

This is one of my favorite control boards to put in my quadcopters. I like the auto level feature.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is one of my favorite control boards to put in my quadcopters. I like the auto level feature.

Great FC! Used the KK2.1 for about a week then changed to the Naze and i love it. So much easier to program and its actually in developent.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great FC! Used the KK2.1 for about a week then changed to the Naze and i love it. So much easier to program and its actually in developent.

Love the board it is way better than kk 2.1 I spent hours setting the kk2.1 up. I spend maybe 20 min. max and was up and flying it is way better than kk2.1. The Naze32 is the go to board. The only problem I had when setting it up was my windows 10 64 bit computer was not recognizing it. Well come to find out through troubleshooting it my micro USB cable was bad. For anyone have problems connecting it to a computer or computer not recognizing it try a different micro USB cable. Otherwise it is a awesome board would not buy anything different.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Love the board it is way better than kk 2.1 I spent hours setting the kk2.1 up. I spend maybe 20 min. max and was up and flying it is way better than kk2.1. The Naze32 is the go to board. The only problem I had when setting it up was my windows 10 64 bit computer was not recognizing it. Well come to find out through troubleshooting it my micro USB cable was bad. For anyone have problems connecting it to a computer or computer not recognizing it try a different micro USB cable. Otherwise it is a awesome board would not buy anything different.

excellent conroller, im very happy with it as it offer a lot of programable setups that you cant do it with a kk2,1, the stabilization its really good, using it with cleanflight provide a lot of options so you can customize the behavior of your quad exactly the way you want it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

excellent conroller, im very happy with it as it offer a lot of programable setups that you cant do it with a kk2,1, the stabilization its really good, using it with cleanflight provide a lot of options so you can customize the behavior of your quad exactly the way you want it

It might be me, but I've just bricked a second one using the instructions and the software above. I am wondering if I even need to do the updates Hobbyking is telling me to perform given they are from 2013, but I don't think I will give this one another chance to screw me over. Give me something wrapped in plastic and operating out of the box through simple software please instead of 3 different programs and a problematic putty configuration line interface. :(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It might be me, but I've just bricked a second one using the instructions and the software above. I am wondering if I even need to do the updates Hobbyking is telling me to perform given they are from 2013, but I don't think I will give this one another chance to screw me over. Give me something wrapped in plastic and operating out of the box through simple software please instead of 3 different programs and a problematic putty configuration line interface. :(

very good, used it on my zmr250 and this one is going on my zmr180, hope it works out good, i will update you when i have it up and running

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good, used it on my zmr250 and this one is going on my zmr180, hope it works out good, i will update you when i have it up and running

  1. 1
  2. 2
  3. 3
Customer files
naze 32 manual Download [440]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking