New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Todos Metal Servoless 90 Degree retrair para modelos de grande (6kg) w / 12,7 milímetros Pin

Todos Metal Servoless 90 Degree retrair para modelos de grande (6kg) w / 12,7 milímetros Pin

Shipped From:
  • USA
  • International (Hong Kong)
QTY:

Now save guardar 0,00 € 0,00 €

27,59 €
Already Purchased
Estado:
Disponível
SKU:
9107000237-0
WANT FREE SHIPPING? Click here to find out more!

Full Metal Servoless retrair para grandes modelos de até 6 kg. Projetado para prender em um 12,7 milímetros Oleo-braço. Apresenta todas as construções de metal de precisão, confiabilidade e durabilidade. Isto faz para uma excelente alternativa confiável para sistemas de retração operados mecânicos de ar e em modelos maiores!

especificações:
Tensão de funcionamento: 4.5 ~ 7.4V
Placa de montagem Dimensões: 59 milímetros x 42 milímetros
Parafuso buraco espaçamento: 43 milímetros x 30,5 milímetros
Velocidade de operação: 6V: 6 segundos / 90 graus, 7.4V: 5 segundos / 90 graus
Profundidade: 35mm
Duração: 86 milímetros
Pin: 12,7 milímetros
Max peso modelo: 6 kg
Peso: 140 g

  • SKU 9107000237-0
  • Brand -
  • Capacidade ( mAh) -
  • Peso 200.0000
  • Comprimento 95.00
  • Packaging Width 55.00
  • Altura 90.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Purchased two units. Put them both on a servo tester and one unit failed after 3 cycles. The other one is still OK. It appears to be a weakness in the circuit board as the motor will still operate if partially disassembled. It just won't reverse. Poor quality control Hobbyking.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased two units. Put them both on a servo tester and one unit failed after 3 cycles. The other one is still OK. It appears to be a weakness in the circuit board as the motor will still operate if partially disassembled. It just won't reverse. Poor quality control Hobbyking.

These looked good on paper, and felt good in hand. They operate decently - until I put a robart strut @180mm and a 5" wheel on them. Both retract units stripped the gearing on the first activation. My sense of humor is bent pretty badly.

These appear to be solid on the surface - but the gear train is not sufficient to work with Giant Scale tires.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These looked good on paper, and felt good in hand. They operate decently - until I put a robart strut @180mm and a 5" wheel on them. Both retract units stripped the gearing on the first activation. My sense of humor is bent pretty badly.

These appear to be solid on the surface - but the gear train is not sufficient to work with Giant Scale tires.

Very poor quality . The gear failed at first test with no load.Is only an impression of strong built in fact is a very weak mechanism.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very poor quality . The gear failed at first test with no load.Is only an impression of strong built in fact is a very weak mechanism.

POOR QUALITY. Bought one for a front wheel on a PC21. Could make it operating twice at workshop then BURNED OUT ...
Seems end sensor in retract position faulty ...
Attractive price is only quality for this item ...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

POOR QUALITY. Bought one for a front wheel on a PC21. Could make it operating twice at workshop then BURNED OUT ...
Seems end sensor in retract position faulty ...
Attractive price is only quality for this item ...

Listed dimensions are mostly accurate. Top plate is 59mm x 42mm, 35mm tall overall. Base is 27.5mm wide and 89mm long, including the motor. Retracts do not change position at power up, regardless of switch position, so your plane won't drop to the round when you switch on your receiver. Each unit weighs 142g.

Very strong. Tested with a 2S life powering the receiver... I have not been able to trip the overload protection by hand ... I'd probably have to jam them with a screwdriver!

Bought a pair of these and one of the 100-degree units. I' hoping they'll fit my ESM DO-335...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Listed dimensions are mostly accurate. Top plate is 59mm x 42mm, 35mm tall overall. Base is 27.5mm wide and 89mm long, including the motor. Retracts do not change position at power up, regardless of switch position, so your plane won't drop to the round when you switch on your receiver. Each unit weighs 142g.

Very strong. Tested with a 2S life powering the receiver... I have not been able to trip the overload protection by hand ... I'd probably have to jam them with a screwdriver!

Bought a pair of these and one of the 100-degree units. I' hoping they'll fit my ESM DO-335...

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking