Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Anjo 920 RC Sailboat 1.840 milímetros (Plug and Sail)

Generating Links

Anjo 920 RC Sailboat 1.840 milímetros (Plug and Sail)

Preço:

Now save economize 0,00 € 0,00 €

135,75 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
113000052-0
Envio Grátis? Clique aqui aprender mais!

Faça uma pausa da norma, sentar e dar RC veleiros uma tentativa. Não se engane em pensar veleiros são lentos e chato. Em um vento forte que pode ser extremamente rápido e executar voltas rapidamente, provando ser muito emocionante. HobbyKing traz-lhe o Anjo 920, a maneira perfeita de entrar no excitante mundo de veleiros RC.

O veleiro Anjo 920 vem conectar e navegar pronto. Basta instalar a sua própria rádio superfície de 2 canais, montagem final completo e pronto! Modelado após oceânicos iates de corrida, o casco do Anjo é moldado compósito de fibra de vidro com um gelcoat perfeito e esmalte vibrante acabamento pintado. Apoiando a vela principal colorida impressa rip-stop nylon é um mastro principal robusto de alumínio. Todos os itens necessários estão instalados, incluindo guincho vela grande, servo de direção, equipamento, vela e hardware. Proteger seus eletrônicos caros é uma escotilha resistente à água, escondido atrás de uma cabine de passageiros falso. Vestir-se o modelo estão alguns detalhes escala como volante e trilhos da plataforma.

A quilha ponderada estabiliza o Anjo, mesmo em um vento forte, mas ela vai continuar em ventos mais leves também. Se você pretende navegar predominantemente em ventos fortes, a quilha ponderada tem uma cavidade oca, que permite que você adicione lastro adicional, se assim escolherem.

Deixa a cabeça para o cais e ver o que ela pode fazer. Em uma tarde quente de verão não há nada como sentar, relaxar com uma bebida fria e experimentar a emoção de velejar o Anjo 920.

Características:
• Plug and Sail - Instalar a sua escolha de receptor e bateria
• casco de fibra de vidro moldado
• acabamento de alto brilho pintada bonita
• velas de nylon rip-stop Brilhantemente impressos
• servos guincho leme pré-instalado e de vela
• quilha removível
• expositor de madeira incluído
• mastro principal de alumínio

especificações:
Comprimento: 920 milímetros
Altura: 1.840 milímetros
Largura: 200mm
Área das Velas: 0.40m2
Projecto da linha de água inferior da quilha: 350 milímetros
Rig Altura do deck ao topo do mastro: 1400 milímetros

Requeridos:
2+ transmissor de canal e receptor
4.8 ~ bateria do receptor 6.0V

  • Angel Sailboat
Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

Toylander | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 20, 2016

Excellent introduction into the world of sail boats, at a very reasonable price, just add your own receiver, an rx battery and ballast the bulb and you will be sailing in no time. It does what it says on the box. Given my first one, now bought a second one so we can have races.

Once you know what you are doing you can upgrade the rigging and fittings, the only mod i would make straight out of the box is the mast joiner, i made one from hard wood 150mm long to stop the wobble.
You will need about 1500 grams of the smallest lead shot you can get and some resin , i used acrylic with worked well but takes a long time to set.

Greg | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 09, 2016

Having had this boat for a few months now, here are my comments. The hull is excellent, well moulded and stiff. The keel bulb can take about 1.4kg of lead shot which I kept in place by pouring epoxy into the bilb. The keel fin is very flimsy and bends sideways alarmingly when the ballast is attached. I made a new fin from Douglas fir sheathed in glass cloth - much stiffer. The joiner for the two piece mast is too short and gives no rigidity to the join. I replacd it with a 6" length of wood shaped to fit inside the mast. I replaced the rigging with wire and turnbuckles and replaced the rubbish spreaders with a single set of proper spreaders at half height plus a set of lower shrouds. I also replaced the mast crane with a longer one. With a decent rig, the boat sails pretty well. The winch has too much travel and I only need half the movement of my transmitter stick to go from fully in to fully out. I am thinking of making a new mainsail as the stock one does not set at all well. Overall, good value for money but it does need some fettling to get the best from this boat.

novembro | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 10, 2014

First navigation, just great, virtually no wind but already good speed.
I put 1,550 Kgrs Lead in the torpedo, it's perfect

Brett | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 03, 2014

Great new boat from the Shunbo Range, a good match for the Phantom. The wide beam and aft section of the hull gives it the most modern shape of the fleet, and longer nose section in relation to the Jib gives it more stability downwind. As with all the range several mods are required to make this a reliable craft, such as adding internal foam buoyancy (sinking prevention), waterproofing the 2 Servos, adding 1.6kg or more lead ballast. The plastic mast crane needs to be replaced with one that extends 80mm rearwards so the backstay clears the Mainsail. (see file section for photos). Optional mods include replacing the plastic chainplates with 3 position alloy ones. With a 3S 800mah LiPo and UBEC supplying power, I get 8hrs run time. Consider getting a spare Monsoon Mast and Sailset to run as a smaller "B" rig in heavier (12 knots) conditions. See Shipshape RC for lots more information.

pilotoheavy | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 31, 2014

va arribar amb la cabina i tapa dels servos trencada. d'origen i no per el transport. construccio fora matusera

David | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 26, 2014

just set this boat up (07/24/2014). this is my first and must say It is very nice boat, so nice it may never see water only cause it is a very impressive piece to look at.

mxhead692 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2014

Boat comes well packaged and looks great, however, there was supposed to be a plug in a small hole in the stern (my cousin also bought one, his has the plug in it!), I didn't notice the hole, boat filled about halfway with water when I tested the boat in a swimming pool for about 15 minutes, and now the winch servo is TOAST! Servo has an O-ring so it's SUPPOSED to be waterproof, or at least water resistant, but it's not! Only replacements are in 'international' warehouse so shipping cost would negate any savings over a $50 Hitech servo. Not a happy sailer here Hobby King!!!

bill987 | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 03, 2014

Bien emball. Tout simplement superbe navigue trs bien mme par gros temps

Arquivos de clientes
No File Name Download [42]
No File Name Download [100]
No File Name Download [54]
Manual Download [18]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!

Acessórios