Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Atmel Atmega soquete Firmware Ferramenta piscando

Generating Links

Atmel Atmega soquete Firmware Ferramenta piscando

Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
332000007
Envio Grátis? Clique aqui aprender mais!

Esta ferramenta gênio faz piscar o Atmel Atmega MCU encontrado em muitos CES ou outros dispositivos que usam processadores Atmega um passeio no parque. Não há necessidade de soldar ou criar clipe pesado em dispositivos, basta ligar a ferramenta piscando socket a um dispositivo USBasp AVR e coloque o soquete sobre o Atmel MCU exposta!

Único e exclusivo para Hobbyking este dispositivo prático vai se tornar um favorito em seu DIY arsenal.

Características:
precisão ponto alto.
Ampla gama de aplicações.
Rápido e fácil, sem necessidade de solda.

Especificações:
Apontando precisão: ± 0,05 milímetros
Força da mola: [± 20%]
17,0 g (0,593 onças) a viagem inicial
40,0 g (1,418 onças) a 1,70 milímetros (0,0669) recomendou viagens
52,0 g (1,827 onças) a 2,50 milímetros (0,0984) de viagem completo
Socket: Phosphor Bronze / banhado a ouro
Êmbolo: Hardened Berílio cobre / banhado a ouro
Barrel: Phosphor Bronze / banhado a ouro
Primavera: Music Fio / banhado a ouro
Habitação: LG Chem ABS-AF312
Comprimento do cabo: 420 milímetros

exige:
Dispositivo de Programação USBasp AVR para proccessors Atmel

Ternos as seguintes MCU:
Atmel Atmega8, Atmega48, ATmega88, ATMega168, Atmega328

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Registre-se para escrever comentários, por favor assinar em ou registar

Ted | Comprador Verificado

  • Overall
  • Value
  • Quality

Great Idea, Mediocre Execution

Feb 12, 2017

When I saw this tool listed in the comments of a YouTube video about upgrading super cheap ESCs to SimonK circa 2015, I fell in love with the idea. The unit is very well made and very slick looking. The pins even have a spring loaded property. However, programming Atmel chips was pretty hit or miss. The first 3 ESCs went OK with just a few re-attempts required. By the fourth ESC, the tool was shot. It took two days, several modifications to the tools, and about 50 attempts to get that last ESC programmed. Even then the tool was not steady enough to verify the write, but the ESC works. So the tool cost more per programmed ESC than the ESCs themselves. Next time I will just solder tiny wires to the Atmel chip.

| Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Mar 03, 2016

a must have for updating your ESC's and very easy to use

greenbigfrog | Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jan 26, 2016

Very great and helpful tool! Get someone else to hit enter!

trevpez | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Dec 11, 2015

poorly made managed to flash 4 ESC's. It stopped working. I thought I'll just replace it but the price has tripled. DON"T waste your money

T0RP3D | Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Sep 11, 2015

Really good flashing connector, easy to use and good quality, i recommend this to anyone!.. thanks HK!,

Veter | Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Aug 29, 2015

Expensive ... but I could not find anywhere else.

jan | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jul 21, 2015

My tool had a wrong pin connection !! ground pin was wired to wrong pin on usbasp header :( i had to cut the heatshrink and resolder to the correct pin.
Sending it back would have cost me more then repairing it myself. to bad....

| Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jun 19, 2015

great product, good instructional video

Naoki | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

May 03, 2015

Great product. Does exactly what it should do, used it to flash my spider opto 30A esc. No issues with flashing and it fit perfectly onto the chip. Don't forget to buy the adapter for the usb cable, you wont be able to hookup to your PC without it.

| Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 28, 2015

Indispensabile per esc, turnigy multistar da flashare assolutamente.

Arquivos de clientes
No File Name Download [48]
Tool orientation Download [226]
flashing list Download [304]
Flashing your ESCs Download [4099]
List of compatible ESC's and hex files Download [250]
Atmel 6-10pin diagram Download [61]
10-6 Adapter Layout (Connect old 10p fla Download [85]
Setup on win 8.1 Download [0]
Picture of adapter pinouts with labels Download [76]
Picture of USBasp pinout with labels Download [97]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!