Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • USA

BA BL2040 2400kv Brushless Inrunner Motor

BA BL2040 2400kv Brushless Inrunner Motor

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
69 g
SKU:
BA-BL2040
Descrição
do

BA BL2040 2400kv Brushless Inrunner Motor

KV: 2400 rpm / volt
PESO: 57g (2,0 oz)
Dimensão: 20 ~ 40 mm (0,78 X 1.57in)
EIXO: 2,0 mm (0.78in)
Fase: 3
Pólo: 2
RESISTÊNCIA: 0.27ohm
INDUTÂNCIA: 0.020mH
Corrente sem carga: 0.4A
Corrente de carga: 12A
Turn: 15

Product
Specifications

Características do Produto

  • SKU:
    BA-BL2040
  • Brand:
    N/D
  • Peso ( g )
    69.00
  • Comprimento
    0.00
  • Largura:
    0.00
  • Altura:
    0.00
  • Kv ( rpm / v )
    2400.00
  • Correntes Max (A)
    0.00
  • Potência (W):
    0.00
  • Comprimento B (mm):
    43.00
  • Pode Comprimento D (mm)
    38.00
  • Max Tensão ( V)
    0.00
  • Shaft A ( mm):
    2.00
  • Unit Weight (g):
    57
  • Diâmetro C ( mm )
    20.00
  • Comprimento Total E ( mm)
    55.00
  • Resistência (MH ):
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Mit einem guten Regler der ueber eine genaue Timingeinstellung verfuegt,bekommt man die Waermeprobleme gut inGriff.Werde Motor jetzt mit 4 Zellen und Prop mit kleiner Steigung (10x3,7)testen und bin jetzt schon zuversichtlich...Sehr gut ist der alte Tsunami Regler oder der Mag 8 ESC20A aus diesem Hause,da sehr genau einstellbar.Das CFK Gehaeuse und die eisenlose Spule gefallen mir sehr gur an diesem Motor
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Benutze die Motoren mit Getriebe 3,7 zu 1 und APC 10x4,7 Slowfly Prop. Ca. 120 Watt Leistung bei 10,7 Volt,wird bei Vollast sehr schnell warm,bei Halbgas kann man sehr lange fliegen,ohne das er zu heiss wird.Sehr guter Wirkungsgrad bei Strmen um 5A,endlos Fliegen mit meinem Bcker Doppeldecker da Halbgas vllig ausreichend.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Muito bom, usando num carrinho on-road 4x4 1/18 3s 70Km/h arranca patinando as 4 odas, poderia at usar um pinho maior do que o de 15T que estou usando, no esquenta nada e a batteria de 800mah dura muito tempo, queria testar com pinho de 17T hehehe
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought one and try it with the 1/18 car, when it run, the cover of motor is removed and completely destroys the stator.

Very week structure

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ok motor for my Zagi. Speed is ok on 3cell 620mAh 20C rhino battery and a 4*2.5 GWS-prop. Does not get hot and mounts right into the old brushed motorbay with only a thin piece of ply on each side.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi,

Dimensions 20x40(44)mm, Shaft 2mm, wheigt 58gr. without connectors.

Tested with Turnigy 18A ESC (low timing) and "Gnther-Prop":

2S Lipo - 6,5-7A - 200gr. Thrust 78% ETA

3S Lipo - 10,5-12A - 325+ gr. Thrust 73% ETA



Great Performance! But 12A is the max. continuos, motor gets warm quickly without cooling.

Regards

Andy
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
im no expert, i bought this motor hoping i can get longer lasting flight time but this motor only lifted my raptor 400 heli an inch off the ground! lol! DONT USE THIS MOTOR FOR HELICOPTERS! its very weak, will be great for planes though...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bit weaker than I expected, but for lighter planes very good performance with lower amps than brushed motors. Only I miss holes for cooling.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor. Got it on my "sagi 430" it pushes very well. Got 4040 prop on it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
moteur performant en 3S (environ 9A) mont sur un planeur X-Race de Airtech.

Les cbles sont par contre un peu fragiles (cbles rigides).
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.