Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

BLS-1004 de alta tensão (7.4V) Brushless Digital Servo w / Nanometer Alloy engrenagem 9,7 kg / .048sec / 66g

Generating Links

BLS-1004 de alta tensão (7.4V) Brushless Digital Servo w / Nanometer Alloy engrenagem 9,7 kg / .048sec / 66g

Preço:

Now save economize 0,00 € 0,00 €

52,32 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
122000018-0
Envio Grátis? Clique aqui aprender mais!

O BLS-1004 é um de alta tensão (7.4V) Coreless Digital Servo com engrenagens de liga leve nanômetros e um caso dissipador de calor Alu. O BLS-1004 inclui um conjunto de chifre servo pesados.

Características:
• bola com rolamento (Si-óleo)
• motor brushless japonesa classificado em alta tensão até 2S Lipoly
• projeto do dissipador de calor da liga
• projeto de sinal digital com 100% quadrado montagem PWS
• medidas automáticas ms centrais
• IC Digital (pacote SOP com os dados de transferência de 12bits)
• MOS-FET controlador (driver espírito capaz de empurrar o poder 7A)
• engrenagens de liga leve nanômetros
• O-ring selado caso

Especificação:
Peso: 66 g
Dimensões: 40,5 x 20 x 39 mm
Torque @ 6V: 7,4 kg / cm
Torque @ 7.4V: 9,7 kg / cm
Velocidade @ 6V: 0.055sec / 60 graus sem carga
Velocidade @ 7.4V: 0.048sec / 60 graus sem carga
Faixa de tensão: 6 ~ 7.4V

  • Servo Torque ( kg) ( min. 0,01 kg ) 9.70
  • Servo Speed ​​( Sec / 60deg ) 0.04
  • Servo A ( mm ) 43.00
  • Servo B (mm) 41.00
  • Servo C ( mm ) 39.00
  • Servo D ( mm ) 20.00
  • Servo E ( mm) 54.00
  • Servo F ( mm ) 28.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

Dennis | Comprador Verificado

  • Overall
  • Value
  • Quality

Needs HV battery

May 16, 2018

The jitters were overcome when using 6.6v Life battery packs instead of 6v Nimh. Must have been a voltage issue.

DeeBee | Comprador Verificado

  • Overall
  • Value
  • Quality

Some jitters

Jun 21, 2017

I have 4 of these but there is a problem and only 1 can be used in a set up. They create some sort of electronic noise and jitter when other channels on the radio are used. The issue was on both FrSky and Orange DMSX receivers. Ferrite coils on the leads make no difference. Otherwise solid servo.

DeeBee | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Feb 25, 2016

I have bought 2 of these and they test well.
Nice smooth tight gear train, quiet and very quick. Centering is spot on.
They appear well built with very heavy duty plastic control horns.
Not too heavy for brushless standard servos. I expect good things from them.

marteau | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Dec 10, 2015

Trs bon servo rapide puissant et fiable je l ai mont sur un t700 l ac trs agreablement surpris mme en 3d appuy il tiens vraiment aussi bien que d autre servo haut de gamme ; frquence de 200hz il ne chauffe pas du tout et fait le boulot je le conseil trs fortement

Peter | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Nov 04, 2015

Best servo company there is. Excellent quality products that match or exceed any other. I use this servo as the throttle servo for all my gas planes. From 30cc to 100cc.

skyfox60 | Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Aug 14, 2015

This servo is build of very high precision. No gear play, very fast. Cable is secured inside on PCB. PCB itself of high manufacturing quality. Housing also very precise. I use this as a tail servo in a HK 600GT. Will come back after a number of flight to report the durability. But as of now, I am very happy with the quality. Tested it so far on a servo tester and in a HV setup with a FBL system at 8,4V. Servo seems to be absolutely worth the money. Worthy screws and fine machined outside, extremely fast with good resolution. Holds the tail rock solid. 2 flights so far, will come back after 50 or 100 flights to report durability but I think that will not be a problem at all.

Davide79 | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jun 28, 2015

I used this on gas of my Slick 540 35 gasoline..this servo is really fast and have a perfect centering!!! Very very happy with this gas set up...my finger is too slow for it!!!

Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!

Acessórios