Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

BMS-1715 HV Coreless Digital MG Servo (7.4V High Voltage) 28,2 kg / 0.15sec / 66g

Generating Links

BMS-1715 HV Coreless Digital MG Servo (7.4V High Voltage) 28,2 kg / 0.15sec / 66g

Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
BMS-1715
Envio Grátis? Clique aqui aprender mais!

BMS-1715 HV Coreless Digital MG Servo (7.4V High Voltage) 28,2 kg / 0.15sec / 66g

Especificações:
Peso: 66 g
Direção: Clockwise / impulso viajar 1.500 ~ 1900us
Dimensões: 40,5 x 20 x 39mm
Tensão de funcionamento: 4.8 ~ 8.5V
Torque: 23,1 kg / cm @ 6v, 28,2 kg / cm @ 7.4v
Speed ​​(seg / 60 °): 0,18 @ 6v, 0,15 @ 7.4v
Tipo de Motor: Coreless
Caso Oriente: Alumínio dissipador de calor
Chumbo / Plug: JR Tipo
Bola de rolamento duplo
Titanium engrenagem Alloy

  • Servo Torque ( kg) ( min. 0,01 kg ) 28.20
  • Servo Speed ​​( Sec / 60deg ) 0.15
  • Servo A ( mm ) 43.00
  • Servo B (mm) 40.00
  • Servo C ( mm ) 39.00
  • Servo D ( mm ) 20.00
  • Servo E ( mm) 54.00
  • Servo F ( mm ) 28.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Registre-se para escrever comentários, por favor assinar em ou registar

Joetrin | Comprador Verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Aug 13, 2015

These servos are amazing. They are strong, robust, and center very well. I use them as elevator servos on my 50cc planes.

49dimes | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

May 24, 2013

Used these servos on a 50cc yak54. They performed well but one of five servos started jittering only after 6 flights. I contacted Blue Bird Technologies Ltd. and they are going to repair the servo under warranty. If it were not for this small problem I would rate 5 crowns all around. I use other Blue Bird servos in giant scale planes and have had great success.

jandavid59 | Comprador Verificado

  • Quality
  • Value
  • Overall

Customer Rated

Dec 30, 2011

Ok guys I ordered over 6 pcs of these servos for testing purposes and to install in my planes. All 6 were tested under extreme pull stress starting from 8kg/cm to 17kg/cm at 7.4V. The servos easily reach 16.0kg/cm without any problems.

I tested electronics and all was well-made. The gears are good and smooth. Overall, the quality of these servos are Good for those who need 17kg/cm performance.

Arquivos de clientes
Brass motor shaft gear Download [3365]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!