New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

BMS-308BB Micro Servo 1,2 kg / .10sec / 6,2 g

BMS-308BB Micro Servo 1,2 kg / .10sec / 6,2 g

Discontinued Product

Please continue searching for a similar product.
SKU:
BMS-308BB
WANT FREE SHIPPING? Click here to find out more!
BMS-308BB Micro Servo 1,2 kg / .10sec / 6,2 g
Especificações:
Peso: 6,2 g / 0,22 onças
Dimensões: 19 x 10 x 23,6 mm
Torque No 4.8V: 1,2 kg / cm, 17 oz / in
Velocidade em 4.8V: 0,10 seg / 60 graus sem carga
  • SKU BMS-308BB
  • Brand Bluebird
  • Peso 28.0000
  • Comprimento 120.00
  • Largura 22.00
  • Altura 75.00
  • Torque ( kg) ( min. 0,01 kg ) 1.20
  • Speed ​​( Sec / 60deg ) 0.10
  • A ( mm ) 26.00
  • B (mm) 24.00
  • C ( mm ) 24.00
  • D ( mm ) 10.00
  • E ( mm) 33.00
  • F ( mm ) 13.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Tres bon petit servo avec un bon retour au neutre et un tres bon couple.

Je l'utilise sur les ailerons des mes indoor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tres bon petit servo avec un bon retour au neutre et un tres bon couple.

Je l'utilise sur les ailerons des mes indoor

exelente qualit de servo

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

exelente qualit de servo

These are really nice servos except for one flaw - if you apply any small amount of pressure just above the BMS writing on the sticker, the gears bind!

After install 2 servos in wings I found that a little bit of pressure in this area causes them to not function. This tolerance is too small in my case so I can't use these servos. It's probably due to the case being too thin and easy to squeeze.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are really nice servos except for one flaw - if you apply any small amount of pressure just above the BMS writing on the sticker, the gears bind!

After install 2 servos in wings I found that a little bit of pressure in this area causes them to not function. This tolerance is too small in my case so I can't use these servos. It's probably due to the case being too thin and easy to squeeze.

looks very nice and of a good quality. hope it'll do the job perfect

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

looks very nice and of a good quality. hope it'll do the job perfect

looks very nice and of a good quality. hope it'll do the job perfect

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

looks very nice and of a good quality. hope it'll do the job perfect

Using these in my minimag. Seem to work OK. Lost a star because the top case came off two of them when handling. Put them back together no worries and applied a bit of CA glue to stop it happening again. Otherwise OK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using these in my minimag. Seem to work OK. Lost a star because the top case came off two of them when handling. Put them back together no worries and applied a bit of CA glue to stop it happening again. Otherwise OK.

Pas terrible, heureusement qu'il y a les autocollants pour tenir le boitier en 1 seule pice.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pas terrible, heureusement qu'il y a les autocollants pour tenir le boitier en 1 seule pice.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!