Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

BMS-375DMG Digital Servo (Metal Gear) 1,6 kg / .13sec / 11,4 g

BMS-375DMG Digital Servo (Metal Gear) 1,6 kg / .13sec / 11,4 g

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
33 g
SKU:
BMS-375DMG
Descrição
do
BMS-373 mg Micro Servo (Metal Gear) 1,6 kg / .13sec / 11,4 g
O pássaro azul está orgulhosa em anunciar uma nova série de servos com muitos novos recursos, materiais de alta resistência, e a mais recente tecnologia digital.
A série digital de BMS-375 são projetados para lidar com as aplicações mais exigentes, incluindo os pilotos de ponta, aviões concorrência 3D e helicópteros, 1/18 carros escala e aplicações de planador.
O servo vai aprender automaticamente horários de pulso transmissor do usuário e bloquear no sinal de cada vez. O servo também inclui um buffer de sinal no CPU com a funcionalidade fail-safe. O motor é enrolada com fio revestido 2PEW fina para melhor condutividade eléctrica e é capaz de resistir a altas temperaturas sem degradação.
O servo vem com um pacote de acessórios eo JR Hitec conector universal / "S", que é fisicamente e eletricamente compatível com todas as principais marcas de receptores vendidos no mundo.
1. M9.6 rolamento de esferas (si-óleo)
2. motor de alto torque com baixo ruído RF (certificação CE)
3. vedações de borracha para caixa estanque
4. Projetado para avião 3D e helicóptero, 1/18 carro e aplicações de planador.
5. Futaba compatíveis 25 ranhuras de saída do dente
6. acionamento do motor digital com sinal PWM ultra-quadrado
7. Determinação automática de servo largura de pulso centro
8. Engrenagens do metal de material de alumínio 6061 combinados com material leve e forte C95
função 9. prova de falhas
10. 2PEW fio do motor revestido para uso em alta temperatura
11. Controle Digital IC - pacote SOP com a transferência de dados de 12 bits
12. chips de driver de motor MOS-FET que podem lidar com cargas de pico 7A
13. Useable em 6.0V


Peso: 11,4 g / 0,44 onças
Dimensões: 24,5 x 11,5 x 23 mm / 0,99 x 0,46 x 0,91 polegadas
Torque No 4.8V: 1,6 kg / cm, 22 oz / in
Torque No 6.0V: 2,3 kg / cm, 28 oz / in
Velocidade em 4.8V: 0.13sec / 60 graus sem carga
Velocidade em 6.0V: 0.11sec / 60 graus sem carga
Product
Specifications

Características do Produto

  • SKU:
    BMS-375DMG
  • Brand:
    N/D
  • Peso ( g )
    33.00
  • Comprimento
    62.00
  • Largura:
    36.00
  • Altura:
    50.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
jeu meca 0.04

incertitude de positionnement 0.06

moins bien que HK 922
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mostly works, relatively smooth movements with acceptable centering (could be better tho).

Its algorithm for vibration compensation is not tuned properly and can induce flutter if you shake your eleron with just the right frequency.

It burns if overloaded/blocked for more than 15 seconds or so. Fortunately it didn't kill my bec and my model survived.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have used these little dynamite servos to replace Futaba s3156. The 375DMG is a little stronger and a little slower than the Futaba, but at 40pcnt of the price! They are fully compatible with the larger, non-micro series of Futaba horns. You need to use the UBEC set for 6 volts for useful speed and avoid heating the linear BEC. These and the 385DMAX servos have a rubber bushing plus eyelet for mounting. You DO NEED these rubber soft mounts to eliminate the servo buzzing. All digital servos need some damping to stop the buzz, and BlueBird has thoughtfully included these items. My only complaint is that there is some variation in performance from servo to servo. You must expect this problem when you pay prices substantially below market, as we are getting less than first pass inspection quality. There are reasons for the low price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought 3... 2 are more noisier then third one... one died in 5 minutes... pay less and risk! doesn't worth!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used in my tricopter project. Have some gear play but still works ok. I will not reccomend it for preciese control but for tricopter is ok!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent servos. Can't say enough about these. I did have HS65HB's on my Sport and then swapped to these as a first step towards going FBL and my flip and roll rate doubled without touching ANY radio settings other than EP and ST. Quiet with NO buzzing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have installed one of this small servos on one 450 size helicopter rudder, in combination with a Futaba 401 GY gyro. For mild flying the servo performs very well, the gyros sensivity was set between 50 and 55 (radio is a Futaba 7C 2,4 GHz.) However when you increase RPM and try some aerobatics the servo is very fast but not strong enough to lock the helis tail. I think is a very good servo, but not strong enough for a 450 helicopter rudder. I will try it as tail servo in my T-Rex 250 and I will post the results.

is very good
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this BMS 375dmg servo is top.Perfect centering and stop position. No slop in gears. I use them in my HK450pro and have around 70 flights without any problems with this servo's. Top servo for top price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great servo! Super inflated price here, $14.00 elsewhere.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
BMS 375, I ordered 3servos a a test for my Trex and Hobby King 450 size helis. I agree with all the other positive reviews here, this is a top servo. Perfect centering, stopping, starting and a very fine response on the sticks of my Futaba ff10. Nice item is that there are spare gear sets and that you can use without any problem Futaba servo horns. Again super low Hobby King price here also.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.