BMS-616DMG + HS Super Strong Servo Digital para bugggy (Metal Gear) 10,2 kg / .12sec / 46,5 grolamento de esferas duplo (Si-óleo)CE Certified Strong 3 Pole Motorpesados caso a prova de água seladadissipador de calor de ligadesign de sinal digital com 100% de PWS quadrados de montagemmedidas automáticas ms centraisALU 6061 e de material de engrenagem C95IC Digital (pacote SOP com os dados de transferência de 12bits)MOS-FET controlador (driver espírito capaz de empurrar o poder 7A)Peso: 46,5 g / 1,66 onças
Dimensões: 40,5 x 20 x 38,5 milímetros / 1,60 "x 0,78" x 1,54 "
Torque No 6.0V: 10,2 kg / cm, 136 oz / in
Velocidade em 6.0V: 0,12 seg / 60 ° sem cargaTensão de funcionamento: 4.8 - 6.0V
Características do Produto
Peso ( g )
Speed ( Sec / 60deg )
Torque ( kg) ( min. 0,01 kg )
Unit Weight (g):
A ( mm ):
C ( mm )
D ( mm ):
E ( mm):
F ( mm )
Très bon servo pour le prix vaut largement des servos bcp plus chers
Neutre impeccable et tenueThese are the very best deal on servos you can buy from HK. Very strong, no buzzing, precise, great servo horns with metal rings at the bottom for added stifness. I use them on all my 1/3 scale gliders.Vert good for 1/10 or 1/8 carsOne of the best offroad steering servos that I have used. Just as strong, fast, and accurate as some of the $70 servos that I have used over the years. I now have several of these in 1/10 buggies and trucks and am very pleased with them.I've use it on my Trooper SCT for more than a year with tons of bashing and even diving without any issue. I just need a little marine grease in the gap between the output gear and the case. Both the speed and torque works well, at least for me! Very satisfy especially there is also replacement gear set available. This is very important for off-road applications.drinfting broke my old one. This works great.same size as 5kg servo, but looks goodGreat servo, works perfect with traxxas slush, wery strong and fast, good for short cors tracks, easy to unstall and connect, but wires is too short itys a minus.I bought a Trackstar servo for my Turnigy DB but it was no good. Now I have this Bluebird in it and it is much better. More expensive of course but I think it's worth the extra. Drop in fit, use the original DB servo arm. I can recommend this for a Tunigy DB or some similar car.Very good servo fitted at my Durango DEX210. The only issue with it is that when you push it fast to the ends, draws too much current and brown out my Frsky receiver. Problem solved adding a 4700F/16V cap on a spare receiver channel.