Become a Dealer Blog
Language
POR
USD
Selected Country:
[["US","AU","GB","DE"]]
    Registar

    Preço total

    0,00 US$

    Carrinho de compras 0 Carrinho de compras 0 Loading...
    Mostrar : TODAS AS CATEGORIAS 7 Sistemas de Potência 839 Radio / Servos 353 Servos 123 Todos os Servos 123

    BMS-621MG alta velocidade Servo (Metal Gear) 6,4 kg / .13sec / 47g

    BMS-621MG alta velocidade Servo (Metal Gear) 6,4 kg / .13sec / 47g

    You will earn 20 bonus points for buying this item.

    Generating Links

    BMS-621MG alta velocidade Servo (Metal Gear) 6,4 kg / .13sec / 47g

     
    Preço:

    Now save economize 0,00 US$ 0,00 US$

    25,25 US$
    Enviado de:
    • USA
    Já comprado Discontinued Product

    Please continue searching for a similar product.
    1 year warranty
    SKU:
    BMS-621MG
    Discontinued Product
    Please continue searching for a similar product.
    Envio Grátis? Clique aqui aprender mais!
    Reportar problema Não é barato?

    Compartilhe o URL

    Descrição do Produto
    BMS-621MG alta velocidade Servo (Metal Gear) 6,4 kg / .13sec / 47g
    O servo vem com um pacote de acessórios servo e é feita com um caso dever servo pesada, o servo é projetado para aplicações de carro de alto desempenho de R / C. Rolamento de duplas esferas com borracha flexível à prova d'água, caso contrário, a ranhura ourput é o mesmo com Futaba 25 dente.

    Este servo vem com JR / Hitec S Connector também conhecido como um "Conector Universal". Mesmo pensei que este servo vem com JR / Hitec S Conectores, este servo é eletricamente compatível com os receptores Futaba.

    Artes 1. metal
    2. Arte curva com suave.
    3. bola M9.6 Duplo rolamento (si-óleo)
    4. 3 pólo forte binário de motor com baixo sinal afetam e sucesso obter a certificação CE.
    5. Borracha caso encaixe para impermeável
    6. Mesmo com Futaba ranhura 25 dente
    Caso servo 7. pesados


    Peso:     47 g / 1,66 oz
    Dimensões: 40,5 x 20 x 38,5 mm / 1,60 x 0,78 x 1,54 polegadas
    Torque No 4.8V: 6,4 kg-cm, 89 oz-in
    Torque No 6.0V: 7,2 kg-cm, 109 oz-in
    Velocidade em 4.8V: 0,13 seg / 60 ° sem carga
    Velocidade em 6.0V: 0,10 seg / 60 ° sem carga

    Especificações do produto
    • Servo Torque ( kg) ( min. 0,01 kg ) 7.20
    • Servo Speed ​​( Sec / 60deg ) 0.10
    • Servo A ( mm ) 42.00
    • Servo B (mm) 41.00
    • Servo C ( mm ) 37.92
    • Servo D ( mm ) 20.00
    • Servo E ( mm) 54.00
    • Servo F ( mm ) 27.00
    attributeset-11
    Close

    Dimension Diagram Guide

    • attributeset-11

    Close

    Vídeos
    Envio vídeo

    Registre-se para enviar vídeos, por favor assinar em ou registar

    Discutir 0
    Tópicos
    Ordenar por
    Tópicos Mais Recentes
    * Nome de utilizador:

    * Sua resposta:


    Por favor, insira o texto mostrado na imagem no campo abaixo
    CAPTCHA Image
    *Código de verificação:
    Cancelar
    Submeter
    Poste um Novo Tópico
    * Nome de utilizador:

    * Seu Tópico:



    Por favor, insira o texto mostrado na imagem no campo abaixo
    CAPTCHA Image
    *Código de verificação:
    Postar Tópico
    Reveja

    Registre-se para escrever comentários, por favor assinar em ou registar

    __Mac | Comprador Verificado

    • Overall
    • Quality
    • Value

    Customer Rated

    Mar 19, 2016

    I have installed this servo in my 2,6m 3d model as a gas sevro. After 20min of good work on the ground (while I was trimming a model) IT BURND!!! well, good that happend not in the air , not recommended

    coolmobility | Comprador Verificado

    • Overall
    • Quality
    • Value

    Customer Rated

    Feb 25, 2015

    I've been using these for years in my yachts for rudder control and had only one fail.
    I sail in salt water and have had boats flooded, but I pack top gearbox with thick lanolin grease, add 'O' ring onto shaft, coat with liquid electrical tape (rubber compound) and they are bullet-proof. I use them in all my yachts. Great power, good centreing, tough and low power consumption.

    doodlebug | Comprador Verificado

    • Overall
    • Quality
    • Value

    Customer Rated

    Feb 16, 2015

    Bought 5 for a seagull models mxs-r, all 5 initially looked very good, however, last night the throttle servo melted down, literally, lots of smoke and melted plastic. Fortunately the airframe was on the bench and not in the air. I have read other reports of BB servos melting down, I'll be pulling the rest and bench testing them for an extended period of time.

    Hudsonn | Comprador Verificado

    • Overall
    • Quality
    • Value

    Certified Buyer Rated

    Sep 16, 2014

    This bluebird BMS-621MG servo is very nice for the price. Quality seems great and speed/torque are quite good and more than adequate for on-road use like I use it. I can highly recommend this to everone.

    Satya | Comprador Verificado

    • Overall
    • Quality
    • Value

    Customer Rated

    Apr 13, 2014

    Ive brought 2 of these servos now and they both work perfectly! nice and fast and center every time, im using them on 1/10 drift cars with a 6v bec, i will be using the hi torque version in my scx10 trail truck when it shows up they are the best bang for buck around!

    Nounoun | Comprador Verificado

    • Overall
    • Quality
    • Value

    Certified Buyer Rated

    Nov 14, 2013

    it came very well packaged and with all the screws and arms. it gives 6.4Kg @ 4.8V and can withstand 6V. Great for RC car and plane

    Elvis Bogart | Comprador Verificado

    • Overall
    • Quality
    • Value

    Customer Rated

    Nov 11, 2013

    For the price this servo has a lot of torque and is very fast. My only complaint is it does not center well. Very good for a basher 2wd off road car steering or off road nitro throttle on a budget.

    LaMont | Comprador Verificado

    • Overall
    • Quality
    • Value

    Customer Rated

    Mar 02, 2013

    I purchased two that run in my 1/8 scale buggy. Good torque, centers great, and noticeable quick speed. I ordered two more to replace my steering servos in my 1/10 scale nitro touring car and 1/10 electric touring car.

    Henrique | Comprador Verificado

    • Overall
    • Quality
    • Value

    Customer Rated

    Feb 25, 2013

    That it is what i call a very good servo. it is very fast, Reliable and cheap! I used it in my SC10 truck and now it is my rc drift car =)
    I have no problema with this servo. I will buy more....

    thecount6468 | Comprador Verificado

    • Overall
    • Quality
    • Value

    Customer Rated

    Jan 14, 2013

    Purchased 9 of these servos and 3 burned out during installation. I didn't expect to find that 30 percent of these servos were faulty

    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. ...
    7. 11
    Manuais / Arquivos
    Subir arquivo

    Registre-se para fazer upload de arquivos.
    Por favor assinar em ou registar para começar a ajudar amadores agora!

    Produtos Relacionados

    Need Help
    Live chat

    © 2024 HobbyKing. All Rights Reserved.

    Trustpilot