New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Boeing P-26A Peashooter EPO 800 milímetros (PNF)

Boeing P-26A Peashooter EPO 800 milímetros (PNF)

Discontinued Product

Please continue searching for a similar product.
SKU:
P26A-PNP
WANT FREE SHIPPING? Click here to find out more!

A Boeing P-26 foi a primeira aeronave de combate de produção all-metal americano e foi o primeiro monoplano busca utilizado pelos Estados Unidos Army Air Corps. Projetado e construído pela Boeing, o protótipo voou pela primeira vez em 1932 e tornou-se um dos lutadores de primeira linha utilizados pela USAAC entre 1933 - 1938. Notavelmente, o P-26A ainda estava em uso com o US Army Air Corps tão tarde quanto 1941, em As filipinas.

O "Peashooter" diminuto - como ficou carinhosamente conhecido pelos pilotos de serviços, foi mais rápido do que os aviões de combate americanos anterior com uma velocidade máxima de 203 Knots. O projeto anacronismo com asas preparou-fio, trem de pouso fixo e cockpit aberto representou um forte contraste com os lutadores europeus da época.

entusiastas escala vai adorar os fios aparelhamento de aço inoxidável, gorgeously detalhe Pratt & Whitney motor de manequim, linhas de painel e cockpit escala, enquanto que as cores brilhantes representa fielmente os esquemas de pintura usaac da época. A fuselagem é construído a partir de espuma EPO durável e oferece um excelente desempenho de vôo para um modelo de seu tamanho. Tempo de construção é reduzido ao mínimo, com funções inteligentes, tais como um parafuso na asa e cauda. Com a servos, ESC e motor todos sendo montado pela fábrica, tudo o que você precisa fazer é instalar o seu próprio receptor e bateria para ter seu Peashooter no ar em nenhum momento. Os fios Escala aparelhamento são facilmente removíveis para o transporte e não há muita potência do motor outrunner pré-equipada. acrobacias clássicos como stall voltas e rolos de tambor são uma piada, mas a P26A é tão feliz voando na velocidade de escala.

Características:
Alto nível de detalhe escala incluindo manequim motor radial
Construção EPO super resistente
Plug and Fly, basta adicionar seu próprio RX e Lipoly!
Montagem fácil e rápido
Acabamento de pintura excelente Pre-War com habilmente Aplicadas Waterslide decalques
Rigging fio incluído
Fácil Acesso do portal da bateria
Difícil de Sub-carruagem com grande diâmetro, rodas estreitas, grande para Tiras Relva
Parafuso em Assembleia Cauda
2 x Props incluído

especificações:
Span: 800 milímetros
Comprimento: 682 milímetros
Peso: 600 g
Motor: Outrunner 1200KV
ESC: 20 w / BEC
Servo: 9g x 4

exige:
Radio 4 Channel
1300mAh 3s Lipoly
carregador de bateria

  • SKU P26A-PNP
  • Brand -
  • Capacidade ( mAh) -
  • Peso 2612.0000
  • Comprimento 855.00
  • Packaging Width 155.00
  • Altura 335.00
  • Boeing P-26A Peashooter EPO 800mm
  • HK P26A Peashooter
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Wow. Had the maiden flight today, totally awesome. Now that the emotions are cleared time for facts. She has ample speed performance. If anyone wants more I wouldn't understand why. Takeoffs are predictable IF you have done your homework. The tail wheel must be set correctly, check the centering. Full up elevator must be applied in the initial taxi run to reach a point where you have good airflow over the fuse. Gentle pressure off the elevator will reward you with a very controllable rotation and you will notice that it is airborne on about 1/2 throttle. Gentle application of the up elevator will see it rapidly gaining height. Now the fun begins. It flies where you put it. Ailerons are very effective and rolls happen in the blink of an eye. It will not forgive pilot error or bad flying. Loops are huge, Immelmans intersting, chandelles exciting, high speed passes exhilerating. Now, it is probably nose heavy. Go 53 mm back from L.E. First landing saw me run out of elevator authority requiring it to be flown onto the ground as it didn't want to flare. For settings use differential on the ailerons with no more than 8 mm up and 5 mm down. Elevator 15 mm up and down rudder 25 mm both ways. If you use expo 30pcnt works for me. I fly tight sticks so these settings suit my style. This plane is energetic, looks great. You could almost do 3D but why would you? Fly it as it is meant and y

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wow. Had the maiden flight today, totally awesome. Now that the emotions are cleared time for facts. She has ample speed performance. If anyone wants more I wouldn't understand why. Takeoffs are predictable IF you have done your homework. The tail wheel must be set correctly, check the centering. Full up elevator must be applied in the initial taxi run to reach a point where you have good airflow over the fuse. Gentle pressure off the elevator will reward you with a very controllable rotation and you will notice that it is airborne on about 1/2 throttle. Gentle application of the up elevator will see it rapidly gaining height. Now the fun begins. It flies where you put it. Ailerons are very effective and rolls happen in the blink of an eye. It will not forgive pilot error or bad flying. Loops are huge, Immelmans intersting, chandelles exciting, high speed passes exhilerating. Now, it is probably nose heavy. Go 53 mm back from L.E. First landing saw me run out of elevator authority requiring it to be flown onto the ground as it didn't want to flare. For settings use differential on the ailerons with no more than 8 mm up and 5 mm down. Elevator 15 mm up and down rudder 25 mm both ways. If you use expo 30pcnt works for me. I fly tight sticks so these settings suit my style. This plane is energetic, looks great. You could almost do 3D but why would you? Fly it as it is meant and y

Just a few pointers that might help modelers in setting up their plane. Be very careful that you check the orientation of your control surfaces. Most servos are set to rotate cw when rudder, aileron turn right and elevator goes up. Because everything is designed for rapid assembly the focus is on quick not on correct. Also, aileron servos are not set up for differential operation where there should be more up than down. Too much down gives adverse yaw. Using ailerons is about reducing lift not increasing drag. Too much down aileron is like having a flap on one side;not good.
Modern radios like the excellent Turnigy have a plethora of functions that are often used for compensating for poor installation practice. Get all of this right and you will have an excellent flying aircraft. This plane is just so right in the air you will love it. Buy one!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just a few pointers that might help modelers in setting up their plane. Be very careful that you check the orientation of your control surfaces. Most servos are set to rotate cw when rudder, aileron turn right and elevator goes up. Because everything is designed for rapid assembly the focus is on quick not on correct. Also, aileron servos are not set up for differential operation where there should be more up than down. Too much down gives adverse yaw. Using ailerons is about reducing lift not increasing drag. Too much down aileron is like having a flap on one side;not good.
Modern radios like the excellent Turnigy have a plethora of functions that are often used for compensating for poor installation practice. Get all of this right and you will have an excellent flying aircraft. This plane is just so right in the air you will love it. Buy one!

I am biased but have always had a weakness for Golden Age aircraft and tthe P26 is way up there on the desire scale. Have read a few articles and reviews about this bird and I have raised the odd eyebrow or two. One point in question is the wheels being in backwards, well, try orientating them first! Tail wheel was not eccentric at all, the rubber tyre just needed massaging into round. Model went together well although tight especially for the battery and esc. Rigging was fun and the springs such a good idea. Wheel spat mounting screws were difficult to set up but all the rest was fine. Tail wheel needed some adjustment to centre properly but that was only 2 turns on the clevis. Paint has not adhered well to all parts of the plane but it is a buzz to weather the plane with some acrylic. It is such a plane with character, you just have to get one! Flying review soon.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am biased but have always had a weakness for Golden Age aircraft and tthe P26 is way up there on the desire scale. Have read a few articles and reviews about this bird and I have raised the odd eyebrow or two. One point in question is the wheels being in backwards, well, try orientating them first! Tail wheel was not eccentric at all, the rubber tyre just needed massaging into round. Model went together well although tight especially for the battery and esc. Rigging was fun and the springs such a good idea. Wheel spat mounting screws were difficult to set up but all the rest was fine. Tail wheel needed some adjustment to centre properly but that was only 2 turns on the clevis. Paint has not adhered well to all parts of the plane but it is a buzz to weather the plane with some acrylic. It is such a plane with character, you just have to get one! Flying review soon.

I received my P-26 and am quite disappointed in the packaging. There are several areas on the body and wings where the paint has been rubbed off due to poor packaging. Such a shame as it is truly a pretty paint scheme. I am rating it low only because of all the marks from the packaging. I will do a review on assembly and flight later.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I received my P-26 and am quite disappointed in the packaging. There are several areas on the body and wings where the paint has been rubbed off due to poor packaging. Such a shame as it is truly a pretty paint scheme. I am rating it low only because of all the marks from the packaging. I will do a review on assembly and flight later.

Der HAMMER!!!!
Wie echt, der Zusammenbau in krzester Zeit, kein Klebstoff ntig.
Sehr starkes Fahrwerk, das sitzt tief und gut.
Holger

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Der HAMMER!!!!
Wie echt, der Zusammenbau in krzester Zeit, kein Klebstoff ntig.
Sehr starkes Fahrwerk, das sitzt tief und gut.
Holger

The paint flaked off the parts straight from the box. The foam seemed brittle. The wiring for the external braces were no fun to install. I thought for sure this little thing might last one take-off and if lucky some kind of fixable landing or two.

With all that said it is has stood up quiet nicely and is a lot of fun to fly. Great size for transport and looks good on the shelf. If you get it please take the time to wire it properly. Not easy to fly but very rewarding.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The paint flaked off the parts straight from the box. The foam seemed brittle. The wiring for the external braces were no fun to install. I thought for sure this little thing might last one take-off and if lucky some kind of fixable landing or two.

With all that said it is has stood up quiet nicely and is a lot of fun to fly. Great size for transport and looks good on the shelf. If you get it please take the time to wire it properly. Not easy to fly but very rewarding.

This is my first product from HobbyKing, and I'd say my experience with it is a mixed bag

THE GOOD STUFF: HK is to be commended for bringing so many relatively little known aircraft to market. Their P-26 is a really attractive and unique aircraft, and for the price you're paying, this kit is a solid value. Some reviews elsewhere (RC Groups.com) have questioned whether the stock motor has enough power. I would say it does in spades! On the maiden flight, I handlaunched it at full power and it fairly leaped from my hand, and was up to a safe altitude for trimming in no time flat!

THE NOT SO GREAT: While the over structure of the aircraft and the quality of the included electronics are just fine, the documentation leaves a lot to be desired. One thing they don't address is how to put the vertical stabilizer/elevator in the too-small slot in the back. There is a 'cone' at the back of the stab that you either have to cut off so it will fit in the slot, or cut material out of the back of the slot opening on the fuselage so the whole assembly will fit. I opted for the former. Not a big deal, but for someone whose experience up to this point has been with Parkzone kits, I was a little surprised to see this not thought through, addressed, or mentioned.

Another maddening issue is paint quality. While the foam itself is fine, the paint, particularly the blue of the fuselage, f

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my first product from HobbyKing, and I'd say my experience with it is a mixed bag

THE GOOD STUFF: HK is to be commended for bringing so many relatively little known aircraft to market. Their P-26 is a really attractive and unique aircraft, and for the price you're paying, this kit is a solid value. Some reviews elsewhere (RC Groups.com) have questioned whether the stock motor has enough power. I would say it does in spades! On the maiden flight, I handlaunched it at full power and it fairly leaped from my hand, and was up to a safe altitude for trimming in no time flat!

THE NOT SO GREAT: While the over structure of the aircraft and the quality of the included electronics are just fine, the documentation leaves a lot to be desired. One thing they don't address is how to put the vertical stabilizer/elevator in the too-small slot in the back. There is a 'cone' at the back of the stab that you either have to cut off so it will fit in the slot, or cut material out of the back of the slot opening on the fuselage so the whole assembly will fit. I opted for the former. Not a big deal, but for someone whose experience up to this point has been with Parkzone kits, I was a little surprised to see this not thought through, addressed, or mentioned.

Another maddening issue is paint quality. While the foam itself is fine, the paint, particularly the blue of the fuselage, f

I purchased this plane after reading about how nice it flies. However, I was extremely disappointed with a number of things. First, the paint rubbed off very easily. I had blue and yellow fingers from just handling it while putting it together. Next, issue had to do with installing the flying wires. I had an extremely hard time crippling the metal crimps. Finally, on its first flight the ESC gave out and the plane crashed.

Recommend, to anyone purchasing this model to coat the plane with some some type of clear paint and replace the ESC.

Also, Hobbyking needs to supply parts.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this plane after reading about how nice it flies. However, I was extremely disappointed with a number of things. First, the paint rubbed off very easily. I had blue and yellow fingers from just handling it while putting it together. Next, issue had to do with installing the flying wires. I had an extremely hard time crippling the metal crimps. Finally, on its first flight the ESC gave out and the plane crashed.

Recommend, to anyone purchasing this model to coat the plane with some some type of clear paint and replace the ESC.

Also, Hobbyking needs to supply parts.

A very charismatic aeroplane, almost Disney cartoonish. The paintwork lets go a bit, but contributes to that "worn" look. The pilot is great, complete with legs, and with a resigned bemused look on his face. Take-off is good on rough grass, with those large narrow wheels. Speed is required to maintain height, which makes for a rather lively performance; a bit skittish in any wind above 10mph. I put 20mg of lead in the battery cover. Landings are good; as the speed drops off, it slows to a stable landing with no tip stall.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A very charismatic aeroplane, almost Disney cartoonish. The paintwork lets go a bit, but contributes to that "worn" look. The pilot is great, complete with legs, and with a resigned bemused look on his face. Take-off is good on rough grass, with those large narrow wheels. Speed is required to maintain height, which makes for a rather lively performance; a bit skittish in any wind above 10mph. I put 20mg of lead in the battery cover. Landings are good; as the speed drops off, it slows to a stable landing with no tip stall.

Just picked this model up from US warehouse and all I can say is WOW! A stunningly beautiful model airplane dripping with scale detail. Paint and decals are superb. Can't wait to build and get in the air. Well packaged. Great job HK!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just picked this model up from US warehouse and all I can say is WOW! A stunningly beautiful model airplane dripping with scale detail. Paint and decals are superb. Can't wait to build and get in the air. Well packaged. Great job HK!

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking