-
Descrição
do -
Este cardan tilt montagem faz para impressionante capacidade de gravação de vídeo com o seu Bumblebee Quadrotor. Ele incluía uma engrenagem de metal mini servo pré-montada que permite a ação de inclinação.
Esta montagem é construída de fibra de carbono de alta qualidade e dispõe de amortecedores de borracha feitas de um composto de amortecimento de vibração especial que faz para excelente qualidade de vídeo.
especificações:
Max largura da câmera: 120 milímetros
Max altura da câmera: 183 milímetros (medido no centro do monte)
Peso: 101 g
-
Product
Specifications -
Características do Produto
-
SKU:
9031000023
-
Brand:
Não
-
Capacidade ( mAh)
Não
-
Peso ( g )
215.00
-
Comprimento:
180.00
-
Largura:
75.00
-
Altura
165.00
-
SKU:
-
Community
Discussions -
-
Rate&
Review -
It seems decent and does the job, though to take my Canon S100, which just fits, I had to swap out the servo, which couldn't handle the weight. I installed a Corona 939 metal-gear servo and now the gimbal works fine. I also attached two rubber bands between the sides of the gimbal and the legs of the quad (an Alien 560, also swapped out the attachment hooks for ones from Tarot). Without the rubber bands the gimbal frame jiggles around too much.This gimbal was specified under the acc part of the x650f so i assume this is compatible with the x650f so i immediately ordered 1, to my dismay when the package arrived, the hooks are far apart and are not designed to be used with x650f! wth hobbyking. why would you specify this on the acc tab of the x650f if it isnt designed for that frame!Ho una Go-Pro3 e dopo averla montata sul mio Bamblebee ho avuto soddisfazione nel constatare che ci sono poche vibrazioni ed il filmato ottimo. Buon prodottoI Love this gimble. It has isolated the waves in the HD footage and works a treat. If you watch the test video, you can see as you thrust forward, the camera stays level so you do not miss any footage. This is evident in the movie when the Habu jet is hand launched and the copter chases the jet as it picks up speed. Without the gimble, all you would see is grass as the copter tilts forward but it stays locked onto the subject (the jet ). I will be replacing the servo as it is a little jerky as can be seen at times in the vid. I have a JVC Everio camera mounted on the gimble lifted by a Dji F550 Hex. All up weight with a 5000 mah 4S is 2.6Kg. <http://www.youtube.com/watch?v=S7uM3PAfmkc>
Regards KeithHI all
I have just unpacked this product and I have to say it is of the highest standard. I have done a lot of testing to isolate vibration waves from the footage of hexacopter filming and I have not found a gimble type mount, UNTIL NOW, that has addressed this issue. This mount has a two point isolation system. The first is the set of blue silecone isolators
at the mounting point and the second is a set of black isolators at the camera mount itself. This totally isolates vibration and is big enough to fit my JVC Everio HD video camera. I have seen many mounts this size for over $200 and they still have not addressed the vibration issues like this product has. The mount is also VERY LIGHT. Awesome product HK and thanks.A good product. The servo needs to be replaced as the rotation angle is less and it is very jittery!!! Use MG90SGreat Camera mount for a GoPro unit comes 100pcnt ready to use out of the box. all you have to do is hookup the servo wire to a free channel and adjust your setting, I used a velcro strap to hold my GoPro in place here is the video
http://youtu.be/AOvArDjXzGEGreat for my gopro with the ys-x6 gimbal control -
Upload
Videos -
Upload
Files -
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!
Sign in
Registar
Sign in / Register
OR
OU
Registar
-
-
-
ACCESSORIES
- EDF Systems & Parts
- Wheels/Landing Gear/Retracts
- Spinner/Adapters
- Propellers
- Wires & Connectors
- Heat Shrink / Shrink Tube
- Flight Stabilization Systems
- Horn/Hinge/Clevis
- Screws, Bolts, Nuts and Fasteners
- Covering Film
- Decal Sheets
- Glues, Lubricants & Tape
- Night Flying Accessories
- Push Rods
- Tube, Rod, Carbon Fiber & Glass Fiber
- Pilots
-
-
-
TELEMETRY & FPV
-
-
-
-
-
POWER SYSTEMS
-
-
-
-
BOAT ACCESSORIES
-
-
-
POWER SYSTEMS
-
-
-
-
POWER SYSTEMS
-
-
-
-
DIY & ELECTRICAL ACCESSORIES
-
-
-
FPV, AERIAL VIDEO & TELEMETRY
-
-
Mostrar Filtros
All Categories
Product Finder
Definições
Useful links
-
-
-
ACCESSORIES
- EDF Systems & Parts
- Wheels/Landing Gear/Retracts
- Spinner/Adapters
- Propellers
- Wires & Connectors
- Heat Shrink / Shrink Tube
- Flight Stabilization Systems
- Horn/Hinge/Clevis
- Screws, Bolts, Nuts and Fasteners
- Covering Film
- Decal Sheets
- Glues, Lubricants & Tape
- Night Flying Accessories
- Push Rods
- Tube, Rod, Carbon Fiber & Glass Fiber
- Pilots
-
-
-
TELEMETRY & FPV
-
-
-
-
-
POWER SYSTEMS
-
-
-
-
BOAT ACCESSORIES
-
-
-
POWER SYSTEMS
-
-
-
-
POWER SYSTEMS
-
-
-
-
DIY & ELECTRICAL ACCESSORIES
-
-
-
FPV, AERIAL VIDEO & TELEMETRY
-
-
Cart is empty Make it look better :)
Total 0,00 € 0 Unid
Product Finder
-
Lipo -
Motor -
Servo -
Propeller
Most relevant matches are shown. Click Search for more items
