Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • International (Hong Kong)
  • USA

CAP 232 Balsa 922 milímetros pré-construídos Plug & Fly

CAP 232 Balsa 922 milímetros pré-construídos Plug & Fly

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
2480 g
SKU:
CAP232-PNP

Combine

essential items and
battery
acc
Descrição
do

Este plug brilhante e voar CAP vem com todos os componentes eletrônicos pré-instalado para fazer uma compilação incrivelmente rápido. Estes modelos soberba habilidades acrobáticas mais do que compensar isso não é aparência bastante escala. plugue de balsa e mosca não é algo que você vê muitas vezes e muito trabalho tem sido feito para você que 1-2 horas no máximo é tudo que você vai precisar para entrar no ar. O motor outrunner poderoso, ESC e todos os servo de são pré-montados deixando-o a cola na tailfeathers e fecha a asa no.

Nós testamos e levado este tampão um pouco e é surpreendentemente capaz com surpreendente impulso do motor de baixa kv e grande combinação prop SF. Os servo de são mais do que à altura da tarefa de manter os impressionantemente grandes superfícies de controle apontando na direção certa eo modelo é prático com a sua asa removível, revestimento bem aplicada, o que é bom para a orientação e material rodante robusto. Se você está farto de espuma, mas gostaria de um pequeno-ish, fácil de construir e modelo acrobático muito capaz, este divertimento, CAP barato 232 é apenas o bilhete!

especificações:
Envergadura: 922 milímetros
Comprimento: 885 milímetros
Asa Loading: 32gdm2
Área Wing: 20.9dm2
Voar Peso: 650g
Servo: 9g x 4
ESC: 30A w / BEC
Motor: 4006 Brushless Outrunner 900KV
Prop: 11x4.7SF

inclui:
decalques
instruções

exige:
Sua própria 4 Channel TX / RX
Bateria 1300mAh ~ 2200mAh 3s Lipoly

Product
Specifications

Características do Produto

  • SKU:
    CAP232-PNP
  • Brand:
    N/D
  • Peso ( g )
    2480.00
  • Comprimento
    950.00
  • Largura:
    160.00
  • Altura:
    275.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Pros:
Ok built. I recommend it being re-enforced with super glue, as it is pooly glued.
The plane flied great.
Motor is good quality

Cons:
-NO SPARE PARTS AVAILABLE
-Besides the Motor, ALL THE INCLUDED electronics are low quality. ESC WILL burn out on you eventually in mid flight. This happened to me and other people. There are videos of it.

If you decide to buy this, I recommend you replace all the electronics besides the motor, reinforce with more glue, and hope to not crash because there are NO parts available for it.

For this, despite the fact that it flies great, I regret buying this plane. The ESC failure set it on fire in mid air and I lost my $150.0...

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane was a nightmare to build, It could not be considered pnp. All the servos were loose as they were screwed into places where screws can not grip. All the servos were glitchy and needed replacing, even the screws holding them were rusty. The prop nuts were also rusty and all the wiring plus the ESC needed replacing. One push rod was also missing. If I didnt have a large amount of spare parts on hand this plane would never have flown.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It seems missing pushrods in the pckage is a common problem. I had mine delivered last year. Just finally found time to open the box and assemble this baby. All in all the model seems capable enough. The build quality is good. The servos are nameless and look a bit cheap though. The control surfaces look quite big. I wonder if it can do 3d.
Yesterday i did a ground test. The motor ran for 3 minutes on full throttle with 2s 1800mah battery. I will be getting a 3s 2500mah at least for the maiden flight. That happens after two weeks when I am back home from work.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice plane, but be careful mine has the right COG without the battery, so if I put the battery in battery case, cog is more than 10 mm forward so very nose heavy. I put the battery under the cockpit for a good COG
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice plane, but it took 2 week to package before it was shipped...
Was missing a pushing rod in mine too.
My first balsa plane, very happy with it. After been assembled, with a 1500 mAh battery, it was very nose heavy (cog 10 mm forward, 79mm from the edge of the wing instead of 89mm). I broke the battery compartiment to put the battery vertically, and then the cog was right. Go vertical very easyly, and had take some hard landing, but stay strong! Yesterday I broke the landing gear sock, but some epoxy and all is like brand new!
A good plane!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great overall performance. Great craftsmanship!
Flys amazing regardless of finding the right cg.
Hovers well with a little extra weight on the tail. Remove the tail wight and you have an incredible sport flyer.
Thanks hobby king! A
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this plane when on special late last year. Unfortunately it arrived in New Zealand damaged, took photos, scanned HK paperwork and followed HK compalint proceedure, They got matter all sorted form me quickly and very much in my favour. Full marks to their customer service.
Havent flown the plane as keeping as replacement for when my HK Pitts Special falls apart or perishes
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mine arrive a couple of days ago. Thank you Hobby King for double boxing. The outer box had a 12 inch crease on the boxt and if not for double boxing the plane would be a right off. Plane very good but it has a lot of plastic parts. A large plastic cowl. It has a large cockpit window and the plastic goes all the way to the nose.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Lots of bits missing from mine , only one pushrod , screws missing , and as usual the clevices where rubbish , DO NOT USE THE PLASTIC CLEVICES the little plastic pin snaps off immediately
I havent flew this yet so will not comment on how it flies, not sure how long the motor and esc will last, and the servos are also crap.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Yust received this plane, everything looks great.
But it is not plug and fly!!!
There is too much to to! It is like other ARF models. Ok, the electronics are included and mounted, but no servo horns, push rods, hinges for elevator and rudder...

verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Combine

essential items and
battery
acc

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.