Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

7,0 kg Corona 538MG Digital Metal Gear Servo / 0.13sec / 53g

Generating Links

7,0 kg Corona 538MG Digital Metal Gear Servo / 0.13sec / 53g

Preço:

Now save economize 0,00 € 0,00 €

9,56 €
quantidade:
Enviado de:
  • USA
Já comprado
Status:
Em estoque
SKU:
DS538MG
Envio Grátis? Clique aqui aprender mais!
7,0 kg Corona 538MG Digital Metal Gear Servo / 0.13sec / 53g
Modelo: DS538MG
Tensão de funcionamento: 4.8V / 6.0V
Corrente de funcionamento: 300mA / 400mA
Velocidade de operação: 0.14sec.60º / 0.13sec.60º
Stall Torque: 6.5kg.cm / 7kg.cm
Tamanho: 20x40x38.5mm (0,78 "x1.57" x1.51 ")
Peso: 53 g
Banda morta: ≤3uSec
Viagem de funcionamento: 40º / um pulso lado 400US viajar
Potenciómetro: 5 controle deslizante / Drive indireta
Rolamento de esferas: MR106
Engrenagem: Metal
Fio conector: 215 milímetros
Faixa de temperatura de operação: -20 a + J 60J
  • Servo Torque ( kg) ( min. 0,01 kg ) 7.00
  • Servo Speed ​​( Sec / 60deg ) 0.13
  • Servo A ( mm ) 44.00
  • Servo B (mm) 40.00
  • Servo C ( mm ) 41.00
  • Servo D ( mm ) 20.00
  • Servo E ( mm) 53.00
  • Servo F ( mm ) 27.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

Heliwingo | Comprador Verificado

  • Overall
  • Quality
  • Value

Geht so....

Jan 09, 2022

Großes Spiel in dem Getriebe....
Rückstellgenauigkeit lässt zu wünschen übrig....
Ware Könnte besser sein.....

Bart | Comprador Verificado

  • Overall
  • Quality
  • Value

Good servo

Dec 20, 2021

Works well on my old nitro car

Antonio | Comprador Verificado

  • Overall
  • Quality
  • Value

Low price but doubts about quality and functioning.

Sep 19, 2021

I bought this servo for a 1/10 rc car but I am not satisfied.
Power and speed are as in the description but when it rotates slowly it shakes and after a few minutes of light use it warms up slightly.
I have at least 10 servos from 4 different brands that are more and less powerful or faster than this one but none of them shake or get hot after a few minutes.
Maybe it is faulty? Maybe it is not suitable for my receiver (Flysky FGr4S)? I don't know.

Bob | Comprador Verificado

  • Overall
  • Quality
  • Value

Good product at a very reasonable price.

May 14, 2021

I bought these to put in a Mick Reeves Gangster Lite as I wanted digital servos without paying the earth for them. I found these on the HK website and having used Corona rc products previously, decided to buy. These are well made powerful units with metal gearing and metal casing. Ideal for my purpose and fairly quiet in operation. Very pleased.

Dietsch | Comprador Verificado

  • Overall
  • Quality
  • Value

Good Quality Standard Size Servo

May 10, 2021

It does what it should. Never had an issue with it

Malik | Comprador Verificado

  • Overall
  • Quality
  • Value

Top

Apr 25, 2021

Rien à ajouter ils font le job

TJ | Comprador Verificado

  • Overall
  • Quality
  • Value

Quality of fittings provided leave doubts about reliabilty

Dec 29, 2020

1. The DS-538MG servos all appear to work OK. However, I have yet to use them in flight, so a comment about reliability would be premature. Control arms. Oh, that should not be plural. The single and solitary control arm supplied does not appear to be adequately strong enough or big enough for a 7kg servo, so I have resorted to more robust arms from my box of bits. Mounting hardware was totally inadequate and appears to have been sourced from Dubro's “Small Servo Mounting Hardware kit”, The brass ferrules only go half way through the mounting rubbers – this means that the puny little screws cannot be tightened properly, as all they do is squash the rubber vibration absorbers. The mounting screws are disturbingly small and unsuited to anchoring such a powerful servo. and were discarded. This meant another dive into the bits box was required, looking for more manly servo mounting screws.. What happened to the notion of providing “fit for purpose” control arms and mounting hardware like in the old days? This is all quite disappointing. I hope that the same penny pinching attitude does not apply to the insides of the servo itself as the longevity of my new 11kg aircraft is at stake. I may have made a bad call buying these servos.
2. The box: Purportedly shows views of the DS-538MG 7kg servo actual size. Not true. The diagrams are about 75% full size. But there's more; The box lid picture, a plan view of the servo, shows 2 mounting screws. Wrong. There are 4 mounting screws. Oh dear.

Peter | Comprador Verificado

  • Overall
  • Quality
  • Value

Good servo. Bad service

Jul 28, 2020

I bought five of these for a new model. Four seem very good - fast and powerful. One didn't work so I asked for a replacement. I am still waiting after several months. There is a delivery charge shown against the order, which I don't understand.

| Comprador Verificado

  • Overall
  • Quality
  • Value

Jun 08, 2020

shlomi | Comprador Verificado

  • Overall
  • Quality
  • Value

a

Mar 05, 2020

aaa

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Arquivos de clientes
Quality Box Download [1545]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!

Acessórios