New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Corona Digital Servo 2,2 kg / 0.11sec / 12,5 g

Corona Digital Servo 2,2 kg / 0.11sec / 12,5 g

Shipped From:
  • USA
  • International (Hong Kong)
QTY:

Now save guardar 0,00 € 0,00 €

5,75 €
Estado:
Disponível
Peso:
35 g
SKU:
C-DS-929MG
WANT FREE SHIPPING? Click here to find out more!

Passatempo Rei Digital Servos pode custar mais do que um análogo, mas para um controle preciso e largura beco sem marca mínima, eles são uma excelente escolha.

Características.
suporte de rolamento de esferas
Digital, com MOSFET
engrenagens de metal
Alta Velocidade e Alto Torque

Spec.
Velocidade: .11sec / 60deg @ 4.8V
Stall Torque: 2.2kg.cm @ 4.8V
Standing Torque: 2.2kg.cm/5deg aguentar !!
Peso: 12,5 g
Tamanho: 22.5x11.5x24.6mm

  • SKU C-DS-929MG
  • Brand Corona
  • Peso ( g ) 35.00
  • Comprimento 65.00
  • Largura 35.00
  • Altura 45.00
  • Torque ( kg) ( min. 0,01 kg ) 2.20
  • Speed ​​( Sec / 60deg ) 0.11
  • A ( mm ) 31.00
  • B (mm) 23.00
  • C ( mm ) 27.00
  • D ( mm ) 12.00
  • E ( mm) 32.00
  • F ( mm ) 22.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Got one of these to try.

Works OK. Centres well but really lacks resolution at low speed. It moves in jumping increments so no good where fine accurate movement is required. Will use it for something other than a aircraft control surface. So therefore only 3 crowns.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got one of these to try.

Works OK. Centres well but really lacks resolution at low speed. It moves in jumping increments so no good where fine accurate movement is required. Will use it for something other than a aircraft control surface. So therefore only 3 crowns.

Brought four of these for a HK 540 Edge EPP plane, found all four have poor centring and bad gear lash (slop)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Brought four of these for a HK 540 Edge EPP plane, found all four have poor centring and bad gear lash (slop)

Good servos, I'm using them for my tilt mechanism on my tricopter

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good servos, I'm using them for my tilt mechanism on my tricopter

Bin sehr zufrieden. Dienen super Dienste in meiner Calmato

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bin sehr zufrieden. Dienen super Dienste in meiner Calmato

good servo for this price

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good servo for this price

Torque and speed ok for price but centering is not very good, alot of play / slop, mounting lugs break easily, 1st gear is plastic and ive stripped about 10 of them. Anyone know where i can buy replacement gears?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Torque and speed ok for price but centering is not very good, alot of play / slop, mounting lugs break easily, 1st gear is plastic and ive stripped about 10 of them. Anyone know where i can buy replacement gears?

Used these in my Outrage G5 helicopter (450 size) for cyclic servo's. Have run heli several times without any issues. Only problem I found were the plastic lugs on the servo fitting tabs, i had to pack them out to mount the servo flush. I used two spacers front and back of mounting tab, one cut down to fit between the lugs the other as a washer to tighten the mounting bolts.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used these in my Outrage G5 helicopter (450 size) for cyclic servo's. Have run heli several times without any issues. Only problem I found were the plastic lugs on the servo fitting tabs, i had to pack them out to mount the servo flush. I used two spacers front and back of mounting tab, one cut down to fit between the lugs the other as a washer to tighten the mounting bolts.

Love these servos they are digital fast, work great at 6v, and the gear-train holds up to most crashes on my CX450BA DFC.

Only complaint is that the case is brittle. So,either strengthen the mount tabs, or buy a couple of the analog 929mg for the case cover and gear-set. Awesome Servo at this price!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Love these servos they are digital fast, work great at 6v, and the gear-train holds up to most crashes on my CX450BA DFC.

Only complaint is that the case is brittle. So,either strengthen the mount tabs, or buy a couple of the analog 929mg for the case cover and gear-set. Awesome Servo at this price!!

The mounting brackets are a bit weak. All four of my Edge's servos are cracked. With some hindsight.. I would stick some epoxy for to fill the underside of the bracket.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The mounting brackets are a bit weak. All four of my Edge's servos are cracked. With some hindsight.. I would stick some epoxy for to fill the underside of the bracket.

Just super stuff, bought these for my Thunder Tiger Mini Titan E325s FBL as cyclic. They perform well and are strong. Will buy more of these in the future. Great value for the money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just super stuff, bought these for my Thunder Tiger Mini Titan E325s FBL as cyclic. They perform well and are strong. Will buy more of these in the future. Great value for the money.

Customer files
VCT RC 450 PRO V2 - Mesut AKIN Download [218]
Are these really digital? Download [249]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save