Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

4,5 kg Corona DS329HV Digital Metal Gear Servo / 0.09sec / 32g

Generating Links

4,5 kg Corona DS329HV Digital Metal Gear Servo / 0.09sec / 32g

Preço:

Now save guardar 0,00 € 0,00 €

9,05 €
quantidade:
Enviado de:
  • USA
  • International (Hong Kong)
Já comprado
Status:
Em estoque
SKU:
014000005
Envio Grátis? Clique aqui aprender mais!

4,5 kg Corona DS329HV Digital Metal Gear Servo / 0.09sec / 32g

Modelo: DS329HV
Tensão de funcionamento: 6.0V / 7.4V
Corrente de funcionamento: 320mA / 420mA
Velocidade de operação: 0.10sec.60º / 0.09sec.60º
Stall Torque: 4kg.cm / 4.5kg.cm
Tamanho: 32.5X17X34.5mm
Peso: 32g
Banda morta: ≤3uSec
Viagem de funcionamento: 40º / um pulso lado 400US viajar
Potenciómetro: 5 controle deslizante / Direct Drive
Rolamento de esferas: MR106
Engrenagem: Metal
Fio conector: 300 milímetros
Faixa de temperatura operacional: -20 ° C + 60c

  • Servo Torque ( kg) ( min. 0,01 kg ) 4.50
  • Servo Speed ​​( Sec / 60deg ) 0.09
  • Servo A ( mm ) 40.00
  • Servo B (mm) 33.00
  • Servo C ( mm ) 35.00
  • Servo D ( mm ) 19.00
  • Servo E ( mm) 44.00
  • Servo F ( mm ) 24.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Registre-se para escrever comentários, por favor assinar em ou registar

Borat | Comprador Verificado

  • Value
  • Quality
  • Overall

Corona DS329HV Digital Metal Gear Servo 4.5kg / 0.09sec / 32g

Aug 14, 2019

Very Very Very fast speed!

N3 | Comprador Verificado

  • Overall
  • Value
  • Quality

Every corona has it's lime

Jul 28, 2019

Using them on a Tower Hobby Slow Ride, which is a huge, slow flying 3D plane. They're doing their job. No bad characteristics. For some reason, this corona goes better without lime.

Mr C | Comprador Verificado

  • Value
  • Quality
  • Overall

Corona DS329HV Digital Metal Gear Servo

Jul 04, 2019

Very fast very strong servo.

C | Comprador Verificado

  • Overall
  • Value
  • Quality

Corona DS329HV Digital Metal Gear Servo 4.5kg / 0.09sec / 32g

Jun 15, 2019

These are very fast servo's! I recommend them!

Lee | Comprador Verificado

  • Overall
  • Value
  • Quality

Corona DS329HV Digital Metal Gear Servo 4.5kg / 0.09sec / 32g

Jun 13, 2019

Why any one would give these less than 5 stars is beyond me? I have tested them quite extensively and they are very fast, very strong and can't be beat for the price, you won't find them cheaper any where else but HK! I do recommend!

Chris | Comprador Verificado

  • Overall
  • Value
  • Quality

Very Fast!!!

Jun 07, 2019

These i have tested over and over and have yet to find any flaws! Very fast and reliable servos at 1/3 the price of high end servo's!!

john | Comprador Verificado

  • Quality
  • Overall
  • Value

I like these servos and others in the same size range from corona

May 21, 2019

I must have about 25 of these servos now I run them through a servo tester for 20 or 30 minutes, had to send a couple of early ones back but none since about 2015. Great servos can't recommend them enough.

Beat | Comprador Verificado

  • Value
  • Quality
  • Overall

Grobe Auflösung

May 05, 2019

An sich ist das Servo nicht schlecht. Ich habe diese in meiner Bushmaster. Ich stelle aber fest, dass die Auflösung sehr gering ist. Es scheint so also ob das Servo die 40° in 40 Schritte auflöst und diese bei langsamen Bewegungen "hackt" Also z.B. bei langsamem Qerruder bewegen macht das Ruder 1° Schritte. Das fühlt sich etwas komisch an. Im Vergleich zu einem Futaba Digital Servo ist das ein Riesen Unterschied. Das Futaba hat vermutlich 1000 Schritte... und fühlt sich dadurch viiiiel flüssiger an.

Chris | Comprador Verificado

  • Quality
  • Overall
  • Value

Servos work well, are fast and don't mind higher voltages but...

Mar 16, 2019

Using these servos in an airplane also equipped with an AS3X Spektrum receiver. The servos work fine at 7.4V, center well, seem fast and have sufficient torque for the application but when the receiver is placed into a mode where there is correction for unexpected attitude change the servos react to the change with a bunch of jitter and over/under correction to the force applied.
I tested and could reproduce this result with multiple AR7350 receivers and DS319/DS329 servos at 7.4V with 22ms and 11ms servo pulse output.
So, while the servos seem to work well for general applications I cannot recommend them for use if you plan to use an AS3X receiver. Might also be a problem with other stabilizers like the Eagle Tree Guardian - didn't test so can't say for certain.

Flysnail | Comprador Verificado

  • Overall
  • Value
  • Quality

Certified Buyer Rated

Nov 28, 2018

Für Elektroflugzeuge gut

  1. 1
  2. 2
  3. 3
  4. 4
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!