Registar

Product Finder

Definições

Useful links

 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • International (Hong Kong)

Corona Sintetizado Dual-Conv Receiver 6Ch 72Mhz

Corona Sintetizado Dual-Conv Receiver 6Ch 72Mhz

Now save guardar 0,00 € 0,00 €

19,66 €
Indisponível!
Stock:
OUT OF STOCK
Peso:
79 g
SKU:
RP6D1-72

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrição
do

Corona Sintetizado dupla conversão Receiver 6Ch 72Mhz

Jogue fora os cristais, dizer adeus a falhas! O receptor novo Corona sintetizado é aqui!
Esta unidade irá trabalhar com transmissores Sintetizado existentes ou transmissores de cristal. Na verdade, a precisão deste receptor irá melhorar o desempenho de todos os transmissores 72MHz cristal.

A nova tecnologia de colocar em série sintetizado de receptores Coron é verdadeiramente notável e certamente vai fazer você pensar duas vezes sobre como atualizar para a 2.4GHz mais caro.

Spec.
Tamanho: 36,8 * 22 * ​​8,3 milímetros
Peso: 8,2 g (com envoltório do psiquiatra)
Sensibilidade: cerca de 2.0ìV
Seletividade: ± 8 kHz a 65 dB para baixo
Número de canais: 1-6
Filtragem: Dual virou circuitos RF
Filtragem: filtro de cerâmica 4 Elemento duplo
filtragem DSP em MCU com o algoritmo leve: Filtragem
Mudança de polaridade: positiva ou negativa (detecção automática)
Modular: FM / PPM (pulso modulação de posição)
Caso: O envoltório do Shrink
Tensão de funcionamento: 4.8V ~ 6.0VDC
Corrente de funcionamento: 11mA

Product
Specifications

Características do Produto

  • SKU:
    RP6D1-72
  • Brand:
    Corona
  • Peso ( g )
    79.00
  • Comprimento
    95.00
  • Largura:
    22.00
  • Altura:
    73.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I still use my old 72mhz gear but needed another receiver. Bought this as it seemed to suit my needs. Tried to bind it with my Futaba 4 channel transmitter first with not much luck. Rx would occasionally find tx signal but would never lock. After trying for over 2 hrs, I abandoned the Futaba tx and tried with my Hitec tx. Receiver found the signal instantly, and got signal lock on first attempt. Still need to do a proper range check but I'm confident it will pass the test.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
what a complete load of rubbish................... every time one switches on, the end points and the lengths of travel or both have changed. THIS IS NOT A PRECISION INSTRUMENT Don't wast your money on this

gregosan 1 points - 10/16/2013
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have a HiTech Flash4 radio with 5 model memory. I was unable to get compatible receivers for this radio, so based on some reading and a suggestion on a forum I went with this. I ordered 2 since the price was low, and the shipping was the same as on 1. I have installed the first in my old sailplane, and it tests out perfectly. I am just waiting for good weather to fly it. The second unit also tests out perfectly. It will be going into a powered airplane soon. It is nice to get extra life out of this older, but not very old equipment without spending hundreds on a new transmitter.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Muy bien . Buena relacin precio y calidad . Se acoplo perfectamente a un viejo equipo airtronics
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a wonderful receiver with long range and good accuracy. Setting up is a bit bumpy, But once you press scan button you will eventually succeed. Don't forget to take the prop off during set up. I highly recommend this Rx.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice little receiver, lightweight and synced with no problems with both my JR F400 and XF631. I like it!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This receiver's range is about 20 feet without glitching. Beyond that my heli gets twitchy. Also the setup instructions in the manual are not correct or clear. I got it bound to my transmitter (a Futaba 7C) but it did not go down like the instructions say so.

This is going into the trash.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
They are the best for synthesized receivers..have good range and lock to my futaba 6exap very well. good for park flyers and upto .40 size planes. Wont go for further up.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
So far Im a little dissapointed with this . No problem ( other than a bit of head scratching ) syncing , even got the fail safe set , but range is poor . Starts glitching at about 15 meters ,which is less than half my old cristal recievers . ( and its bad glitching , not just an occasional flick ) .May be okay in the foamy that its in ,( only flown close in so far ) but not very confidence inspiring .Think I might consider 2.4
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have a Futaba 6XAs transmitter on channel 35. I bought one of these Corona 6 channel synthesized Rxs. It bound fine. First flight was uneventful except a few motor gltches. The next day I flew again and at around 500 feet away it went into fail-safe mode, circling at half throttle with no control response. It wound up 60 feet high in a tree. I tried switching the Tx on and off and got it back into responding, but not enough power to get it out of the tree.

I cannot tell if this is a binding, range or interference problem. I fly in an area that I would expect a lot of RF, near an airport and also with a cell tower less than a half mile away. But I think I would not use this for a large and powerful plane or full range, as it was less than 500 feet away when I lost control. The fail safe worked well though, except for the tree!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Customer files
RP6D1 Receiver Manual download now [1256kb]

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.