Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

D50012MG 56.7g / 5,4 kg / 0.05sec alta velocidade Digital MG Servo

Generating Links

D50012MG 56.7g / 5,4 kg / 0.05sec alta velocidade Digital MG Servo

Preço:

Now save economize 0,00 € 0,00 €

27,55 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
D50012MG
Envio Grátis? Clique aqui aprender mais!
Spec.
Torque: 4.2kg.cm em 4.8v / 5.5kg.com em 6.0V
Velocidade: 0.06sec / 60deg 4.8v / 0.05sed / 60deg 6.0V
Peso: 56.7g (.11oz)
Voltagem: 4.8V ~ 6.0V
Tipo Caixa de velocidades: Ti-Alloy
Tipo de Motor: Alto desempenho Coreless
Bearing: Dual
Plug: Tipo de JR
  • Servo Torque ( kg) ( min. 0,01 kg ) 5.40
  • Servo Speed ​​( Sec / 60deg ) 0.05
  • Servo A ( mm ) 43.00
  • Servo B (mm) 40.00
  • Servo C ( mm ) 41.00
  • Servo D ( mm ) 20.00
  • Servo E ( mm) 57.00
  • Servo F ( mm ) 29.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

enrique | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 26, 2014

I have 2 of these servos , they work great I have then on my sbach .45 , there very fast when I Let go of the stick I can't even see the servo go back to center, I using them on a rudder and elevator ...

simon4 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 10, 2013

Wow, i have to say: This is the first very good product of Hobbyking. Impressive speed, solid, lots of power. i can only recomend this one... even though it is quite pricey if you compare to other brands....

Ben | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 03, 2013

I've been using the servo on the tail of my Century Hawk Pro .32 nitro heli. It's a fantastic servo. I had been using an HK401 gyro until to day when the gyro failed. I'm trying a new gyro now, but so far I can't find any fault with the servo at all.

TurboLeon | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 24, 2013

Been using this on the tail on my 550 for some time. Very fast and seems very well made. Does not get hot while using. Also impressed how strong it is, pulled the carbon push-rod apart twice at the joint due to a jammed guide. Servo still works flawlessly.
Very happy with the servo.

herman | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 09, 2012

Use this servo for Velocity 50 in throttle and tail, use with GY611 that using 1520 pulse (service menu set), servo is very fast and strong but get hot after hard maneuver on tail, very good servo for it's price but don't work too hard on tail,,

Simon | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 30, 2012

An addition to my review from this servo:
colour is different, it comes fully black! no red in it and the case is fully plastic. Its one of the fastest servo ive seen, uses a lot of currency.
Servo DS 8418 Digital Ultra-S from Graupner has the same speed, but doesnt burn currency, but its more than the double of the price (60$).

Simon | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 29, 2012

Oh my god! This servo is super super super fast!!!! Using it for my 1:8 Serpent with a 6.6V Lipo to the receiver and futaba receiver. Whatch out!!! This servo used a lot of currency!!! So take a receiver Lipo with enoufh mAh, 700mAh is too little, i tried it and doesnt work for long. Minimum take a 1200mAh Lipo, 6.6V, set your receiver to digital servo mode and you will have the fastest servo plus it is really precice!! i only can recomend it, it is much better than the savox and futaba ones ;-)

Ben | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 17, 2012

This thing is ridiculously fast. I'm using it as a tail servo for my .30 size Century Hawk Pro nitro helicopter. Running on an HK401 gyro, it was super easy to set up and the servo is incredibly fast. I have no problems keeping the tail locked in and the gain is much lower than I used to have to use. Great servo for the money.

I.Ralenekov | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 18, 2012

This is a high quality servo from Blue Arrow (the same manufacturer of Mi Servos). I have bought 3 of these for my 600 EFL frame to use them as cyclic servos. They are great, very powerful and smooth but the grease inside is insufficient. Re-grease and enjoy :) Time will tell how durable they are.

pizzaschnitzer | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 24, 2012

wow. insane fast on buggy steering in 2WD. Power is very good (more than the servo saver can link). almost no gear play, very smooth working.

  1. 1
  2. 2
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!