Registar

Product Finder

Definições

Useful links

 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • International (Hong Kong)
  • USA

Dardo 450 FPV Quad-Copter Com Distribuição de Energia, limpo e sujo, iluminação LED e LV Alarm

Dardo 450 FPV Quad-Copter Com Distribuição de Energia, limpo e sujo, iluminaç...

QTY:

Now save guardar 0,00 € 0,00 €

62,49 €
Stock:
Peso:
560 g
SKU:
9107000359-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrição
do

HobbyKing introduz um novo Dart para a série. O Dart 450 FPV H Quad é embalado com ainda mais recursos e ainda mantém um preço diversão.

Os pacotes de Dart 450 algumas grandes características, design, durabilidade, aparência e ainda não vai quebrar o banco. O quadro vem com um sistema de isolamento de vibração limpa e suja, projetado para dar ao controlador de câmera e vôo um bom passeio agradável. O Dart 450 também foi construído em um sistema de distribuição de energia que monta o ESC do, bem como montagem direta para XT60 / T-conectores. Ele também tem um sistema de luz principal orientação LED integrado e uma cauda e um alarme de baixa tensão ligados aos LEDs com sinal sonoro, bem como saídas de potência AUX para A / V eo FC! O quadro tem canais de corte CNC para o encaminhamento da fiação através do quadro, tornando esta uma das mais limpas instala você pode ter.

Os braços do motor são agradáveis ​​e robusto em 5 mm de espessura por danos livre acidente, e ainda fez a luz em todos os lugares certos. O Dart também tem de montagem da câmera opções para FPV e HD, montado para a frente e longe da vista prop. O novo 450 vai limpar adereços de 10 polegadas e aceito baterias tão largo quanto 56 milímetros!

Se você comparar o dardo com a concorrência a única coisa que é menos é o preço.

Características:
• sistema de isolamento de vibração limpa e suja
• Distribuição de energia com construído no monte conector de alimentação e LED luzes do ponto
• alarme integrado de baixa tensão ligada ao LED e buzzer
• 8 ~ 10 polegadas prop adaptável
• canais de encaminhamento do fio para uma instalação limpa
• braços motores 5mm de espessura

especificações:
Distância entre eixos: 450 milímetros
Peso: 399g

Requeridos:
Motores: 2212 ~ 2216 de tamanho
Hélices: 8 ~ 10 polegadas
controlador de vôo: distância de montagem 30-45mm
Bateria: 3 ~ 4s 2100-5400mah
Rádio 5ch

Product
Specifications

Características do Produto

  • SKU:
    9107000359-0
  • Brand:
    Não
  • Peso ( g )
    560.00
  • Comprimento
    350.00
  • Largura:
    30.00
  • Altura:
    95.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
This frame is a lot of fun. With the anti vib mount she is great. It fit up to a 22XX motor with up to 30amp ESC. It come with a holder with a camera an all the hardware you need to build.
Quality
Value
Overall
Quality
Value
Overall
Soldering is not too great on the PDB. It's a bit heavy and a bit weak.
Quality
Value
Overall
Quality
Value
Overall
There are no spares for this item, I had been waiting 2 weeks before I got a reply saying that there are no spares as I needed some arms now I have to get a new frame, don't bother buying this frame.
Quality
Value
Overall
Quality
Value
Overall
A well made frame. Nick thick arms with all the holes pre drilled. The fixings and accessories are well made with aluminium spacers and steel screws. The PDB is well equipped with pre-installed and wired LED, with two modes (Solid/Flash). Would recommend thread lock on all fixings!

The frame has plenty of room inside for all components. The PDB has plenty of pads to enable tidy wiring and easy access to power anywhere on the quad.

My spec below:

900KV ntm motors
10" props
Afro 30a ESC
5000mah 4S lipo
Hitec Rx/Tx

Couple of issues with the frame however.

1. No nylon stand offs for the FC
2. No Nylon screws for the Vibration Dampers
3. Black Dampers are far too soft. Change to Blues

The above 3 points are all standard on the Dart 400, not sure why this doesn't get the same treatment. Hence the 4 crowns.
Quality
Value
Overall
Quality
Value
Overall
When I purchased this I was skeptical about it's performance, After equipping it with Naza M flight computer some nice motors and FPV set-up. I was impressed. It flew wonderfully and stable. Then due to my error i dropped it out of the sky about 100ft. Hit the grass hard... To my surprise just the camera popped off NO DAMAGE to the frame or anything else. Put the camera back on and to this day it has over fifty flights and still flies great. I'm going to buy another soon.
Quality
Value
Overall
Quality
Value
Overall
Good frame with a few desing flaws. I bought 2 frames, both had the light mode switch ripped off and missing parts. One of the post had no threads. I find the rubber absorber a little weak. You need to order nylon screws to hold the dirty frame and clean frame together so they do not seperate when you try to install the battery. The little post used as landing gear are very weak. you should replace them.
Quality
Value
Overall
Quality
Value
Overall
Besides some initial problems with the delivery of this item (like others, the button for the battery alarm had broken off in shipping) - it has so far been a decent and fun frame to fly. The arms seem pretty durable, and its fairly light weight. With no assembly instructions, I would say its a moderate-level build - but is very clean looking when finished thanks to the integrated PDB, mounting area for ESC's and ample room for electronics.

The vibration dampening balls that come with it are very soft, and will not hold much weight in the clean section before bottoming out. You will probably want to get blue 65g dampeners (http://www.hobbyking.com/hobbyking/store/__55649__Vibration_Damping_Ball_65g_Bag_of_8_US_Warehouse_.html). Even with those, this still isn't meant to hold much weight. I have a gimbal and controller mounted on the front of mine and still get some vibration from the clean section of the frame - luckily I mostly shoot photos, my video is usable but not amazing.

I paird this frame with 30A Simonk ESC's and NTM Prop Drive Series 2830-1100KV Motors, and it fly very smooth and nice.
Quality
Value
Overall
Quality
Value
Overall
Just finished mine no problem with screws at all. Pictures in files section. Oh my switch for the LEDs was missing the button but the switch still works, you just need a cap screw to press inside the hole.
Quality
Value
Overall
Quality
Value
Overall
Very good frame with very thick and durable arms. Only minus is the cheap quality of screws. Be careful when tightening so you won't round them. Also, one spacer on the top or "clean" part of the frame didn't have threads on other end. Why there is no spare screws included?

I like the power distribution and the very bright LEDs very much too and the presoldered XT-60 is a nice little extra.

My setup has a Multistar 4S Li-Po, 2216-11 900KV Sunnysky motors and 10x4.7 props and seems to be flying smooth. Haven't tested with video gear yet, but I think it will be smooth too and there should be room for a FPV camera AND a GoPro or Mobius. :)

I recommend this frame for everyone who are looking for this sized quad frame for FPV or aerial video. Unbeatable in this price point! Just add some extra screws...

Quality
Value
Overall
Upload
Videos
  • Dart 450 PCB FPV Quad

Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.