DHC-2 Beaver Balsa Super Scale 1.800 milímetros (ARF)

• Overall
• Quality
• Value

Customer Rated

Jul 22, 2016

It Took me sometimes to fly My DHC I was keeping her for display. I used a slight different config using a 4250 motor with 600kv and a 6S 5000mah and of course a 60 amp esc to give her a little more power. I wish I had flown this plane before. I recommend a master airscrew 3 blade 33x20 13x8 to do the job. I prefer a slow rate with 30 percent expo on elev rudder and ail. Excellent for first balsa trainer. If you balance the plane well she will glide to a perfect landing without power. Ah almost forgot. I added a little sound system to produce realism to the engine sound. I installed the speaker between the engine mount and the cockpit. I hope Hobby King continues to produce this kit as it is one of my favourites.

• Overall
• Quality
• Value

Customer Rated

Jul 18, 2016

I customized this plane with a Saito 15cc twin engine for realistic look and sound.
Very good looking plane and easy to fly (land).
No missing parts in the box except the seats... 2 instead of 4 as, shown on photo's.
Over all I'm not disapointed.

• Overall
• Quality
• Value

Customer Rated

Jul 11, 2015

well packaged and well built some small items missing, there is a problem with the imitation engine and undercarriage as whoever did the paint job they forgot to remove the protective cover that is on the blow moulding before they painted it and as soon as you touch it to do anything it comes off removing all the paint which makes a wast of them painting it to start with, the same covering is on the windows so remember to remove it before you try glueing them in as it does not mention it in the instructions and if you forget then the windows just drop out after just leaving the layer of glue behind.
at the moment I have not flown it but to get the CoG in the recommended place I had to put 2 3s 5000ma batteries into it also the motor looks a little to small but i will give it a try and then edit this review.
Regards Poppy Ann.

• Overall
• Quality
• Value

Customer Rated

Apr 20, 2015

Fin d'inventaire : il manque 5 charnires baton pour les flaps, il manque des charnires fibre pour les ailerons, il manque des siges : j'en ai reu 2 alors qu'il y en a 4 sur les photos.
A signaler : les portires ne sont pas montes sur charnires : elles s'embotent puis doivent tre visses (pratique pour les changements de batterie...)

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 12, 2015

Bien reu via european warehouse. Pas de dgats niveau emballage l'arrive en Belgique via European Warehouse. Inventaire: trs bien fini. manque quelques charmires souples en fibre pour les ailerons (2, c'est trop peu mon gout). Je remonterai 5 stars aprs inventaire complet.

• Overall
• Quality
• Value

Customer Rated

Jun 02, 2014

Hi,
I have received this plane last week. Beautifull bird with a great scale look!! Some difficulties during the building but nothing serious..Some missing parts too, or wrong parts :(.
I have put 4 turnigy 9018mg in the wings and 2 turnigy 4409 in the fuselage. servos in the wings seem very light, i'm a little afraid, 'll let you know after the maiden flight ;)
I intend to cut and beef up the firewall and to put an ASP .61 4 strokes for more realistic scale.

If someone have tips or pictures, dont' hesitate to share ;)

• Overall
• Quality
• Value

Customer Rated

May 12, 2014

I received my just over a week. Apparently not missing any part, but the dummy engine arrived very damaged. I sent photos to HobbyKing to show the damage, but they have not given me any answers. Poor job of HobbyKing. I did not expect this from HobbyKing.

• Overall
• Quality
• Value

Customer Rated

May 03, 2014

Just received mine and un-boxed it. Well packed and in perfect condition! Well done HK!
I am astonished at the overall quality of this model and do not think one could reasonably expect to purchase the materials for much less than the asking price of this ARF.

It has a fairly decent instruction manual with it too and the hardware provided looks solid and workmanlike. It appears it may take just a bit more than an afternoon to do it justice and there's a few things which require more than basic skills to get done.
I have a Turnigy 3548 1100 kVa to go in which should provide plenty of power when teamed up with a 12X8 EMP prop.
The interior is huge and it will make installing electronics and batteries easy for fairly big hands. Probably run a dual battery , in-parallel system with 4S 3000mAh . Also looking at pull-pull cable rigging for reliability and bumping up the wheels from 75mm to 100-110mm for the bushplane look.


No particular hurry to complete this and will update when it's maidened.

• Overall
• Quality
• Value

Customer Rated

Oct 05, 2013

Endlich ist sie da! Der erste Eindruck ist fantastisch.Die Qualitt ist gut nur bei den Ruderhrnern htte man auch GfK nehmen sollen, ansonsten geht auch das Zubehr in Ordnung. Alles lsst sich Problemlos einbauen ist aber nur was fr gebte Modellbauer.
Viel Spass wnsche ich allen Kufern damit. Ich kann den Bausatz sehr empfehlen.

• Overall
• Quality
• Value

Customer Rated

May 09, 2013

It's flown now, very pleased. Plenty of power from the 4250 motor using a master airscrew 13/8 and 4000 4s pack.8 min flights with about 30 to 40pcnt remaining at the end depending on how the model is flown and how windy the weather is. I think due to the large fuselage the model is affected by windy weather. Flaps are great really slow the model up on landing.
Only big change I made to the build was the ABS undercarriage fairings are poor so I've made then out of balsa and ply and covered then in silver solarfilm they look OK. The flap hinges looked a little flimsy so I've sleeved them with carbon rod, this has made them much more rigid.
Even with the large battery nose weight was needed to balance the model, not a vast amount but still enough to make the model slightly heavier than the target weight.