New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Turnigy DIY Chave 6 de posição para Turnigy 9X / 9XR / 9XR Pro

Turnigy DIY Chave 6 de posição para Turnigy 9X / 9XR / 9XR Pro

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000869-0
WANT FREE SHIPPING? Click here to find out more!

Outra excelente upgrade para adicionar mais funcionalidades ao seu Turnigy 9X, 9XR e 9XR Pro. Use este kit para adicionar um botão rotativo 6 posição de seu transmissor.

Para aqueles que utilizam um drone com ArduPilot esta é uma solução ideal para substituir difícil lembrar 2/3 interruptor de posição combinações. Usando este interruptor botão rotativo 6 posição vai fazer mudar os modos de voo muito mais fácil.

Basta substituir um de seus botões rotativos não utilizadas com este botão de seis posições.

Uma solução ideal múltiplos modos de voo e para a câmera navio robô voador.

Características:
• Não mais difícil lembrar 2/3 interruptor de posição combinações com complexo de mistura tx
• Fácil de usar seis botão rotativo posição
• Compatível com Turnigy 9XR, Turnigy 9XR Pro e Turnigy 9X
• Sistemas ArduPilot

inclui:
conjunto da chave 1 x 6 Posição
chave 1 x 1,5 mm Allen (hex)
1 x Instruções

exige:
Ferro de solda
Solda
Algumas ferramentas básicas (pinças, alicates, chave de fenda)

Nota: Este interruptor de modo só pode ser usado para substituir um botão contínua no seu TX. Ele não pode ser usado em vez de um interruptor de duas vias ou de 3 vias.

  • SKU 9171000869-0
  • Brand Turnigy
  • Capacidade ( mAh) -
  • Peso 19.0000
  • Comprimento 160.00
  • Packaging Width 19.00
  • Altura 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

After reading the reviews I decided to give it a try. It DID work for me with a little mechanical intuition, but the other reviewers are correct, the shaft difference does make for a challenging conclusion. However, the soldering went well and the switch makes it a lot easier to utilize the different flight modes. Don't expect it to be perfect - the old knob certainly looks better on the 9XR and of course only fits the brass collar. Just be sure you get the set-screw to seat nicely on the flat part of the shaft. I took a dremel tool to the shaft as it was a little too long for my liking - it made the old knob stick up higher than the rest. Again, it worked for me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After reading the reviews I decided to give it a try. It DID work for me with a little mechanical intuition, but the other reviewers are correct, the shaft difference does make for a challenging conclusion. However, the soldering went well and the switch makes it a lot easier to utilize the different flight modes. Don't expect it to be perfect - the old knob certainly looks better on the 9XR and of course only fits the brass collar. Just be sure you get the set-screw to seat nicely on the flat part of the shaft. I took a dremel tool to the shaft as it was a little too long for my liking - it made the old knob stick up higher than the rest. Again, it worked for me.

Poor instructions - photos are incorrect and they tell you to re-use the brass collet. Unfortunately if you do this, you won't be able to use the new dial. I ended up re-using the existing potentiometer knob as it was a more solid setup than the plastic knob that comes in the kit. Also, the instructions don't clearly point out how to setup the 6 POS switch if you are using the more recent ERSKY9X firmware. Other than that though, it's a worthy add-on that provides very good functionality to help you get the most out of your 9XR/9XR Pro investment.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Poor instructions - photos are incorrect and they tell you to re-use the brass collet. Unfortunately if you do this, you won't be able to use the new dial. I ended up re-using the existing potentiometer knob as it was a more solid setup than the plastic knob that comes in the kit. Also, the instructions don't clearly point out how to setup the 6 POS switch if you are using the more recent ERSKY9X firmware. Other than that though, it's a worthy add-on that provides very good functionality to help you get the most out of your 9XR/9XR Pro investment.

Customer files
Pic info of HK 6 Position Switch Download [1476]
Pic info of HK 6 Position Switch_c Download [431]
6 POS Rotary Switch FIX for Turnigy 9X Download [379]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking