Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Dr. Mad Thrust 1600kv 2400watt 90 milímetros do FED inrunner 6s versão (36 milímetros)

Generating Links

Dr. Mad Thrust 1600kv 2400watt 90 milímetros do FED inrunner 6s versão (36 milímetros)

Preço:

Now save economize 0,00 € 0,00 €

55,61 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
107000117
Envio Grátis? Clique aqui aprender mais!

Introduzindo nosso Doctor Mad Thrust alto desempenho motor série EDF. O nosso médico foi ocupada trabalhando nos bastidores para chegar a esta série MAD da EDF motores ....... poder? - Não falta com estes!

Este é 1600kv 6s versão para atender às unidades do FED 90mm, com uma potência 2400watt gritante esta inrunner 36 milímetros não é para ser desprezado!

A gama Thrust Dr. Mad de inrunners do FED foram construídas com apenas uma coisa em mente - o máximo desempenho do FED! Dispõem de enrolamentos do estator de alta temperatura, rolamentos de alta qualidade, são precisão equilibrada para um funcionamento suave e são de um design de 4 pólo.

Over-projetada para lidar com o stress ea tensão de unidades do FED de alto desempenho e alta 'C' pacotes classificados. O médico tem estado a trabalhar arduamente para lhe trazer uma série de prova de bala, extremo motores desempenho do FED que são construídos para durar.

Obter uma casa de força de impulso Doctor Mad para o seu EDF!


especificações:
RPM / V: 1600kv
Tensão: 2-6s
Max atual: 100A
Max Power: 2400 watts
Sugeriu Rpm faixa de operação.
Alta contagem Blade: 32000 rpm
Baixa contagem de Blade: 37000 rpm
Poles: 4
Diâmetro: 36 milímetros
Frente Montagem Distância Hole: 25mm
Diâmetro do eixo: 5mm
Comprimento do eixo: 13 milímetros
Frente montagem Thread Size: M3
Plugue do tipo: 4 milímetros Bullet-Connector
Peso: 317g

  • Kv ( rpm / v ) 1600.00
  • Correntes Max (A) 100.00
  • Resistência (MH ) 0.00
  • Max Tensão ( V) 22.00
  • Potência (W) 2400.00
  • Shaft A ( mm) 5.00
  • Comprimento B (mm) 74.00
  • Diâmetro C ( mm ) 36.00
  • Pode Comprimento D (mm) 74.00
  • Comprimento Total E ( mm) 90.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • Dr Mad Thrust EDF Motors
Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

elektriker | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 08, 2016

Bin von dem Motor begeistert.
Super Leistung und Wirkungsgrad, wird kaum warm.
Dreht einen 12-Blatt Rotor, den Dr Mad Thrust 90mm 12 blade fan.
Der Sound ist toll, leises Rauschen, fast schon zu leise.
Erst bei Vollgas hört man was.

| Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 31, 2015

Great motor. I've got mine in the Taft fan in my HK Cobra (you'll need a 100A ESC) and it puts out 2200W.

Mark | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 31, 2015

Mind blowing performance for your $$$

I bought 2 of these for my 6S cat and added cooling jackets. Performance is stunning . This is the 2nd race boat that I have fitted Dr Mad Thrust and they perform at the pointy end always. Thanks H/K

| Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 01, 2015

i got this for a 2mtr glider running it on 3s 2600mah 60c discharge battery a 100a delux esc and a 14x8 folding prop and only pulling 44amps loads of power and stays nice and cool happy days

Natali | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 02, 2014

As an update to my previous review above. I installed the exact motor above that wasn't up to 8s and an EVO fan in a Taft 11 blade fan and ran it on 6s and it did amazing. LOTS of power and smooth running. Motor is staying cool and was a pretty easy fit. (just a little trimming on the shroud for it to fit)

elektriker | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 07, 2014

Sehr zufrieden.
Funktioniert sehr gut mit original FlyFly-EDF @ 6S ca. 65A.
Hat auch kein Problem mit dem DPS Series 90mm 12 Blade EDF-Rotor bei 6S und ca. 85A.

Very satisfied.
Works very well with original FlyFly-EDF @ 6S approximately 65A.
Also has no problem with the DPS Series 90mm EDF-12 blade rotor at 6S and about 85A.

Howdeedoodee | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 07, 2014

I put this in a carbon fibre jet see here http://translate.google.co.uk/translate?hl=en&sl=ru&u=http://ascomsk.narod.ru/fx-27.htm&prev=/searchpcnt3Fqpcnt3Dascpcnt2Bfx27pcnt26rlspcnt3Dcom.microsoft:en-GB:MIE-Address
I ran it on ASPEC 2200mah 6s battery on a 7 x 7 prop and it screams through the air with that speed of sound and is as fast as my stratair viper https://www.youtube.com/watch?v=WD2yT-aEzMY

siskojuice | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 06, 2014

its a Dr mad thrust good thrust with 6s batt

Tonino | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 19, 2014

Sorry to say that in my case these motors do not live up to their expectation. Totally different kV between 2 of the same motors (25pcnt). One pulling 105 amp (but choking the ESC) producing a lousy 1.45 kg thrust. The other using 122 amps (getting hot) and producing a lousy 2 kg of thrust with 90mm CSF. Had to cut open my brand new plane to get these out and replace them for 2x HetRC producing 2x 3.5 kg thrust. Still debating with HK on waranty.

g00seman | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 15, 2014

I bought one of these and installed it in a Changesun 12 blade 90mm fan.
I used a red brick 125 amp esc and 6s1p zippy compact 35c 4500 battery pack.
This motor is awesome, the fan runs so smooth and i didnt have to balance anything.
I use this in the FLYFLY hobby topgun L-39 also from HKing.
This model took off in 50 feet and hand launches as well so easily it flies out your hand.
I will deff be purchasing more of these motors in future, on 6s and a 12 blader they a great combo for 2500 watts.

Grant

  1. 1
  2. 2
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!