The engineers at Durafly have come out with another easy to fly hand launcher: the Durafly Brewster F2A Buffalo. Prior to World War II, the US Navy was looking for a monoplane to fly off their aircraft carriers and the Buffalo was the winner. The Durafly Buffalo comes in two stylish color schemes: the easy to see US Navy pre-war colors and the early World War II US Navy colors.

Unfortunately, the Buffalo was no match for the Japanese Zero and Oscars but it did perform well for the Finnish Air Force against the Soviets.

This is a superbly finished model made from tough EPO foam and molded plastic fittings. Stickers are pre-applied and it also comes with a realistic scale pilot. The motor and ESC are already fitted. As with other Durafly products all control surfaces have ball links for more precise flying.

The Brewster Buffalo starts flying with an easy hand launch. With the power to burn it will easily perform loops and rolls with a few Immelmann’s thrown in. Some slow passes will easily show off the mid-set monoplane wings and stubby fuselage design that makes for straightforward belly landings.

Time to power into the air with the Durafly Brewster F2A Buffalo.

Features:
• 2 x Classic US Navy schemes
• EPO foam construction
• Pre-applied scale decals and paint
• Hand launch and belly-landing design
• Sports scale detail
• Cockpit with scale pilot
• Compact size for easy transportation
• Ball-link connections

Specs:
Wingspan: 920mm (36”)
Length: 650mm (26”)
Weight: 675g (13oz) (without battery)
Motor: Aerostar 28mm 1200KV Brushless Outrunner
ESC: Aerostar 40A Brushless
Propeller: 10x5
Servo: 9g x 4

Recommended Setup:
CG: 52~55mm from leading-edge
Aileron: +/- 14mm
Rudder: +/- 15mm
Elevator: +/- 8mm
Exponential: 30~35%

Required:
1 x 4 Channel 2.4GHz Radio System (TX and RX)
1 x 2200mAh 3S LiPo Battery

Manual is located on the files tab