New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

DYS 320 Fibra de Carbono completa Folding Quadrotor Com armazenamento caso (PNF)

DYS 320 Fibra de Carbono completa Folding Quadrotor Com armazenamento caso (PNF)

Discontinued Product

Please continue searching for a similar product.
SKU:
9206000033-0
WANT FREE SHIPPING? Click here to find out more!

Você pneu com o pensamento de construir o seu próximo 320 quad? Você deseja para um quadro de tamanho PNF 320 com todas as funcionalidades de um multirotor DIY e mais? O DYS 320 PNF multirotor vai responder a um grande sim a todas essas perguntas!

O DYS 320 PNF Quadrotor tem toda a funcionalidade e flexibilidade de um quadro de DIY ea facilidade de uso de um PNF.

A mais recente oferta DYS incorpora qualidade BE motores brushless série, placa piloto aberto controle de vôo CC3D totalmente licenciado (pré-ajustado), humedecido placa de isolamento câmera, controladores de velocidade BLheli e um design quadro dobrável que se dobra perfeitamente no estojo de transporte fornecido.

O controlador de vôo CC3D proporciona uma sensação nítida quando voando tricopters, quads, hexcopters, octocopters e aviões de asa fixa e até mesmo se for especificamente seleccionado para este Quadrotor PNF para trazer-lhe uma plataforma super estável em linha reta fora da caixa.

O software de controle de solo (GCS) fornece uma maneira fácil de programar a placa através de uma conexão USB. Cada placa foi pré-flashed e afinado com o firmware mais recente de modo a criação de seu Quadrotor terá nenhum momento a todos.

O DYS 320 PNF é fornecido com um conjunto completo de acessórios, adaptadores prop e todos os equipamentos e acessórios.

Características:
• formato PNF adicionar seu receptor e vamos começar a diversão
• Controladores 20A Opto BLHeli velocidade
• DYS poderosa BE motores de série 2300kv
• sistema de controle de vôo CC3D pré-sintonizada
• Abrir nuvem piloto configurados e pré-ajustado
• Folding quadro portátil (Fibra de Carbono completa)
• prática bolsa de transporte incluída
• construção em fibra de carbono total Extremamente durável
• apoio peças completas

especificações:
Base de roda: 320 milímetros
Motores: DYS BE1806 2300kv (pré-instalado)
ESC: 20A opto BLHeli (pré-instalado)
Adereços: 6x3 (pré-instalado)
FC: CC3D (pré-instalado)
Peso: 345 g

Requeridos:
5 ~ rádio controle 6ch
bateria de 1300 ~ 2200 3s
engrenagem FPV opcional

  • SKU 9206000033-0
  • Brand DYS
  • Capacidade ( mAh) -
  • Peso 1295.0000
  • Comprimento 370.00
  • Packaging Width 140.00
  • Altura 350.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

quad is nice, but no manuals at all, and it is not ARF at all, connected CC3D board and libre Pilot, configred radio inputs, but no output to motor ESC,
spent all evening online to find out that you have to use vehicle setup wizard in order to
make it work,
so not so plug and play,
quad is nice and fly ok, but order lot of spare props if you are new with quads like
me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

quad is nice, but no manuals at all, and it is not ARF at all, connected CC3D board and libre Pilot, configred radio inputs, but no output to motor ESC,
spent all evening online to find out that you have to use vehicle setup wizard in order to
make it work,
so not so plug and play,
quad is nice and fly ok, but order lot of spare props if you are new with quads like
me.

this was my first racing quadcopter and it was the most fun i have had in a long time. it is so easy to setup and flys like a dream. I have only used it with point of view. but from what i can guess it works great with fpv.
with the many crashes i had being a first timer it stayed together very well, because it has folding booms it absorbs the impact of the fall and of course i have broken 20 props in the first 3 days of flying but that's me :D
works best with a 2200mah battery i could get 15 minutes with this with out compromising on power.
the only big complate it the landing legs, they made them out of carbon fibre along with the rest of the quad which was a STUPID idea, because carbon fibre is stiff as hell and i was scared to death to put them on let alone taking them of to get it in to the case.


pros
great value
good for beginners
tough and sturdy
easy to setup
easy to work with

cons
hard to reach usb port
stupid landing legs

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this was my first racing quadcopter and it was the most fun i have had in a long time. it is so easy to setup and flys like a dream. I have only used it with point of view. but from what i can guess it works great with fpv.
with the many crashes i had being a first timer it stayed together very well, because it has folding booms it absorbs the impact of the fall and of course i have broken 20 props in the first 3 days of flying but that's me :D
works best with a 2200mah battery i could get 15 minutes with this with out compromising on power.
the only big complate it the landing legs, they made them out of carbon fibre along with the rest of the quad which was a STUPID idea, because carbon fibre is stiff as hell and i was scared to death to put them on let alone taking them of to get it in to the case.


pros
great value
good for beginners
tough and sturdy
easy to setup
easy to work with

cons
hard to reach usb port
stupid landing legs

To order other items correctly, detail information is necessary.
Connector size for battery should be mentioned.
And a little bit detail assemble manual should be necessary.
Due to too stiff landing feet, now I cannot assemle them to carbon frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

To order other items correctly, detail information is necessary.
Connector size for battery should be mentioned.
And a little bit detail assemble manual should be necessary.
Due to too stiff landing feet, now I cannot assemle them to carbon frame.

I was really looking forward to this quadcopter when I've placed an order in January 2016. The delivery was quick and I was setting it up in open pilot in no time. HOWEVER, after going through all of the setting I found that one of the motors was twitchy. After back and forth emailing following online chat sessions HK sent me a replacement motor. The motor took over a week to get and it was a different colour (ok - not a big issue). HOWEVER the new motor didn't fix the problem! after soldering the new motor to the ESC, it still had the same issue!!! Finally, after spending about 2 hours with the HK online service chat, I've sent the quadcopter back to the warehouse (AT MY OWN EXPENSE!!) for replacement. Finally at the beginning of April (yes - APRIL!!!) I received the quadcopter that took off for 2-3min until it crashed. The FC lost power for some reason (while everything else had the power supply). After removing and connecting cc3d board via the usb I've noticed a hot spot and identified BAD SOLDERING that was shorting the board. Managed to remove the fault with the solder iron and now the quad is flying again. So what can I say - I don't think anyone should go though the same experience... the expectation is that the product that you pay for just works!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I was really looking forward to this quadcopter when I've placed an order in January 2016. The delivery was quick and I was setting it up in open pilot in no time. HOWEVER, after going through all of the setting I found that one of the motors was twitchy. After back and forth emailing following online chat sessions HK sent me a replacement motor. The motor took over a week to get and it was a different colour (ok - not a big issue). HOWEVER the new motor didn't fix the problem! after soldering the new motor to the ESC, it still had the same issue!!! Finally, after spending about 2 hours with the HK online service chat, I've sent the quadcopter back to the warehouse (AT MY OWN EXPENSE!!) for replacement. Finally at the beginning of April (yes - APRIL!!!) I received the quadcopter that took off for 2-3min until it crashed. The FC lost power for some reason (while everything else had the power supply). After removing and connecting cc3d board via the usb I've noticed a hot spot and identified BAD SOLDERING that was shorting the board. Managed to remove the fault with the solder iron and now the quad is flying again. So what can I say - I don't think anyone should go though the same experience... the expectation is that the product that you pay for just works!

Fit to my 3D cameras which I put in front of the frame. It look like an ant when I put VTXs with 2 antennas on top. Nice frame with case, so I can easily bring it anywhere without worry.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fit to my 3D cameras which I put in front of the frame. It look like an ant when I put VTXs with 2 antennas on top. Nice frame with case, so I can easily bring it anywhere without worry.

Great little quadcopter for someone who doesnt want to build or worry about that part. Downside, when the ESCs go almost impossible to change out. The replacements that HK has are NOT a direct replacement, as you need to ask them about the new pin layout. Great price when the drop it to 50pcnt off sale price, but get it while its on sale, the sale typically ends pretty quick. The feet are extremely hard to snap on in the beginning, and annoying that you need to take them off each time to fit back into the case they designed for it (you would think they would make it fit).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little quadcopter for someone who doesnt want to build or worry about that part. Downside, when the ESCs go almost impossible to change out. The replacements that HK has are NOT a direct replacement, as you need to ask them about the new pin layout. Great price when the drop it to 50pcnt off sale price, but get it while its on sale, the sale typically ends pretty quick. The feet are extremely hard to snap on in the beginning, and annoying that you need to take them off each time to fit back into the case they designed for it (you would think they would make it fit).

I have had this product for about 3 months it is my second quad this thing is great i have had some hard crashes with it and it still keeps flying great
pros
out of the box easy set up and fly
loads of features
props are larger than stated
cons
needs additional struts/posts
has a week spot on bottom plate by esc slight cracking if crashed hard

i would recommend it to my friends

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have had this product for about 3 months it is my second quad this thing is great i have had some hard crashes with it and it still keeps flying great
pros
out of the box easy set up and fly
loads of features
props are larger than stated
cons
needs additional struts/posts
has a week spot on bottom plate by esc slight cracking if crashed hard

i would recommend it to my friends

good little quad just the esc are part of the frame so have fun replacing them when time comes

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good little quad just the esc are part of the frame so have fun replacing them when time comes

Customer files
dys 320 Download [1436]
3d printable Head for props... in case you lost them Download [705]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking