EC3 Plugs (10pairs / set)
caixas de nylon.
internos primavera qualidade.
Características do Produto
Peso ( g )
/home/helmut/Aktuell HK/TGS Sport 4.5x4.5E Precision propeller.txt
/home/helmut/Aktuell HK/Super Light Spoke Wheel D40x11mm.txt
/home/helmut/Aktuell HK/EC3 Plugs (10pairs set) (EU Warehouse)Exceptional quality. Easy to solder and hard to beat. If you have Eflite products or want to standarize your electronic hardware. This ones are the ones. Easy to Clip, very hard to unclip.So easy to get these EC3 connectors soldered up and then clipped into the plastic housing, the design couldn't be better ! Highly recommendedVery nice. If they are not real e-flite, they are the best copies I have seenI use a conventional soldering iron to "pre-tin" the wires. Then, I use a set of helping hands to hold the gold plated connector, upside down. And, a micro butane torch on very low heat to melt the solder inside of the connector. The rosin core will burn if the heat is too high, creating a dirty solder joint. I then, quickly, insert the pre-tinned wire into the cup of the connector and remove the torch to solidify the joint. It's like cooking a witches brew in a cauldron, if that helps....These are the BEST EC3-compatible plugs out there!!! They work very well with the official Horizon/Dynamite/E-Flite/Losi plugs (all the same company), whereas many of the other EC3-compatible plugs out there are either way too loose or way too tight. Batch after batch, I order these, and they always work perfectly with themselves and with official EC3 plugs.As descibed. Quality and condition were as described. No complaints as they are just connectorsI prefer the HK EC3 connectors which have bullets pre-installed but these stock ones are also fine as long as you are quick to insert bullets right after soldering. Haven't had a problem with either so far. My system runs 50-60 A on continous draw for 1-2 min per flight.
converted all my stuff to this plug cant beat the price and it works great too will work with xt60 plug too one wayWhat can i say, have a bunch of these and love them. Solder up much cleaner than deans, no exposed metal covered in heat shrink and gets soldered 360 around the wire which i believe is better than soldering one side only.
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!