EDF canalizado Unidade Fan 7 Lâmina 3inch

• Overall
• Quality
• Value

Customer Rated

Aug 06, 2013

Used this with the Turnigy 2836 3200kv motor and 3S.
The sound is really nice actually, more "jet" than "woosh". It didn't need balancing though the motor mount seems a little weak and probably need reinforcement.
About the motor-edf combination: It pulls about 65 amps and give about 6-700 g of thrust in bench, slightly lower mounted in my machine due to the smaller outlet. The motor tends to overheat, so a lower kv motor with 4S might be a good idea.
I said "used" because I crashed my plane at 150 km/h which made the probably very hot motor to push itself through the mounting holes (again, the motor mount is a bit fragile).
All and all, I really enjoyed this EDF, but I should have choosed a lower kv motor with 4S instead of 3S.

• Overall
• Quality
• Value

Customer Rated

May 04, 2013

I put value only two crowns , just because it comes with 3,17mm shaft .And the fact that the mini motor for this fan they all have 4mm shaft ,Which means you got buy extra shaft for cost of $5.99 .doesnt add up . Other wise great fan . PS i dont want to open the hole to 4mm not advise able .

• Overall
• Quality
• Value

Customer Rated

Feb 26, 2011

this fan,1500kv outrunner,6 cell,40a mystery speedy,tested gives 1050grams thrust at 24.5amps..550watts....850g thrust in my kyosho f16 with restricted ducting for high speed, No cheat holes.very fast.. plane weighs 900g

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 16, 2011

This EDF motor setup is solid.. I recommend getting this to upgrade all you Jets that require more thrust for your amps..

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 09, 2011

it is great edf very high quality and low price....

• Overall
• Quality
• Value

Customer Rated

Nov 13, 2010

To get most out of fan you most close down the shroud rotor gap using duct tape or balsa wood. The gap allows to much air to pass buy making too much turbulence and you must put some foam lip or something in the inlet especially at high kv speeds.

55oz of thrust on 3s\2200\40c\88amps, 4100kv cyclone motor

• Overall
• Quality
• Value

Customer Rated

Aug 18, 2010

This EDF is awesome! I put this baby on a Hobbico Diablo and replaced the stock 55mm EDF. I made a custom underbelly mounting and tube using a 2 Liter pop bottle,so the odd size of this fan didn't matter much.I used a 2845 HXT 2200 kv motor on 4s 40c 2200 mAh Turnigy.It gives good thrust with the aggressive blades.I'm trying a 55 batt,but not sure if the motor will get too hot.

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 04, 2010

comprei para o motor Wild Beast FED Outrunner 4880kv de 70 milmetros com variador 90 / 100 hobbyking ss

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 02, 2010

Great fan unit super strong, it just doesn't fit any regular Jets, this brand and size fit well for 90mm and not an upgrade for 70mm too much foam removeal

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 23, 2009

Could be a bit more harder the plastic, when it reach critical rpm the blade touched inside walls(