Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • USA

F9F Panther BYR Mão Lançamento Version (PNF)

F9F Panther BYR Mão Lançamento Version (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
3035 g
SKU:
F9F-2-PNP-B

Combine

essential items and
battery
acc
Descrição
do

O Grumman F9F Panther teve a distinção de vencer a primeira vitória dos EUA Navys nos skys sobre Coreia quando se abatido um Yak 9 em um ar ao engajamento ar. Desenvolvido no final da 2 ª Guerra Mundial, com o primeiro vôo ocorrendo em novembro de 1947, este grande aeronave procurando não estava em serviço de linha de frente por muito tempo antes de ser substituído por modelos mais recentes asa varrida, e terminou sua carreira em grande parte em esquadrões de reserva. Apesar desta curta carreira em termos de aviação, a Panther tem muitos fãs.

Esta mesma escala modelo olhar EPO muito faz a justiça Panther, e parece incrível no céu com aqueles enormes tanques das asas coloridas. A unidade EDF liga muito poderoso fornece lotes de empuxo e soa fantástico, o desempenho é excelente, mesmo em 3s com muita vertical. Sendo a versão mão-lançamento dá-lhe opções para retrai se assim o desejar, como as placas de montagem são pré-montados. Todos os servos de alto torque são pré-montados, como é o CES totalmente programável e UBEC o que dá a possibilidade de 4.8V ou 6V saída para o RX.

Este é um modelo de escala de qualidade que é um pouco mais complicado do que a média da tomada N Fly, em termos de construção, mas a recompensa para o piloto de RC é um dos melhores modelos de espuma de vôo e à procura na classe de 70mm.

especificações:
Envergadura: 1050 milímetros
Comprimento: 1000 milímetros
Voar Peso: 1000 ~ 1100g
EDF: Alloy 68 milímetros com 2848 Brushless inrunner 4370kv (Thrust Estático em 3s - 1150g ~ 1200g)
ESC: 60A OPTO
UBEC: 3A ~ 5A
Servo: 4 x 9 g High Torque

inclui:
Todos Hardware
instruções
Folha Decalque abrangente

exige:
Sua própria 4 Channel TX / RX
3s 3700mAh ~ 5000mAh 3s Lipoly Bateria

Product
Specifications

Características do Produto

  • SKU:
    F9F-2-PNP-B
  • Brand:
    N/D
  • Peso ( g )
    3035.00
  • Comprimento
    960.00
  • Largura:
    290.00
  • Altura:
    290.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Came very well wraped, go's together fast for a kit, foam is first class but had a couple of blisters in the paint, used epoxy to glue it but be warned sand the paint before glueing, decals are nice and are on three sheets good manual with C of G. The wing is glued on so if you wont to fit retracks do it before fixing the wing though ply plates are pre fitted and servoless retracks would be easy to fit at any time. waiting for weather to maiden her it really likes the part.

I hope she flys as good as she looks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Its a realy nice model. I changed the engine and esc with a rclander 68mm, 1.7 kg thrust and 80 amp esc. I modified it with flaps and dsr b retracts. Had to do some cutting to make it fit but it was worth it. I also put on the turnigy rc led lightning system. I use a 4 cell 4500 mah battery and a separate receiver battery. (2 cell 850 mah. life battery, 48 gram). Tot weight is 1.750 kg and flying time with different power setting is 12min.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not a bad foamy EDF, it has a nice shiny painted finish with minimal moulding dots and lines, it can be seen that these have been avoided where possible and it looks neat. Its not smooth smooth, but its not bad for a painted foam finish.

Instructions are OK, limited though, and show assembly steps which on my model have already been completed. This did not save time at all as the assembly was pretty shoddy, parts did not fit, control surfaces were not aligned and there was a significant amount of excess glue in the hinges preventing movement. After a couple hours trimming with the dremel, I have managed to get it to work. Also note that the "perfect fit" DSRB retracts are no where near a perfect fit, and require cutting and gluing in blocks for the retracts.

I will be running 2x 3S 2150 batteries which need to be jammed all the way in the nose (past the battery tray) to get it to balance. EDF does run smooth on mine though, and will produce around 0.8-0.9:1 thrust with the retracts, and top 1-1.1:1 without the retracts.

Overall, a great looking model, great finish on the foam with sharp trailing edges on the wing (looks great). Might paint the surfaces a bit to help distinguish top and bottom.

Would I buy it again? so far I'm pretty impressed by the foam model, but let down by the poor assembly. With some work that I'm prepared to put in, at this price point, I think I
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The model is ok but the retracts that are supposed to be an exact fit do no fit without triming wood at mounts and also nos has to modified to accept nose wheel electric retract. this was the TGY-DSRB retracts.

As for weight and balance try putting fiberglass in the nose to strengthen it and the balance will be fine. This has to be done before glueing it on. Tha plane is slower with the electric retracts and a better motor would be good.

Charles
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Finally got it balanced. After a burnt out motor and splitting it in half twice. The alloy EDF needs a 4000mah batt up front to get the CG forward enough. Flys steady and has huge presence in the air. Sounds a million bucks and fan is smooooooth. Not really for beginners and even then I'd only take it out for special occasions. Enjoy.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Combine

essential items and
battery
acc

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.