Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

Falcon Flying Wing 1.340 milímetros (ARF)

Falcon Flying Wing 1.340 milímetros (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
1593 g
SKU:
FALCON

Combine

essential items and
esc
battery
servo
motor
acc
Descrição
do

A Falcon é uma asa grande! Este modelo divertido é feita a partir de ultra resistente EPO com longarinas de carbono executando a parte superior e inferior da asa, que é tão bem, asas de vôo tendem a ser pilotado como se eles foram roubados!

Os decalques deixar um pouco a desejar, se formos honestos mas não é nada um pouco de fita colorida não vai resolver. Sendo um kit deixa você escolher qual trem de força Hobbyking e servo de instalar, o que significa que este deve ser um modelo mais barato para aqueles dias em que você quer ter o seu cérebro para fora!

especificações:
Envergadura: 1.340 milímetros
Comprimento: 620 milímetros
Área Wing: 31.3dm2
Asa Loading: 16.3dm2
Voar Peso: 510g (aprox)

inclui:
instruções
decalques
ferragens
Leads Servo Extensão
ply Parts
Canopy Ímãs

exige:
Sua própria 4 Channel TX / RX com a Delta Mixagem
Bateria 1500mAh ~ 2200mAh 3s Lipoly
2 x Servo 9g
22/28 1900 + kv Brushless Outrunner Motor
20A ~ 30A ESC w / BEC
6X4 Prop

Product
Specifications

Características do Produto

  • SKU:
    FALCON
  • Brand:
    N/D
  • Capacidade ( mAh)
    Não
  • Peso ( g )
    1593.00
  • Comprimento:
    680.00
  • Largura:
    175.00
  • Altura
    340.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Good plane if you don't push it too hard or fast. Its really nice to fly & looks geat in the air. However there's way too much flex in the whole airframe, the Stock elavons are garbage & so are the canopy magnets, the canopy would fly off by itself during flight & go through the prop! Then you'll spend 20 minutes trying to find it & the tiny prop-chewed peices to glue back together again (if you find it at-all!!). The elavons after being heavily modified by being removed & shaped then adding a stiffening rod of carbon fibre & x4 ca hinges still "flutter" causing crazy vibrations that eventually popped a servo out & lead to a massive crash resulting the death of the plane. Spend you hard earned money elsewhere unless you intend to slope it or slow parkfly!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Built this in maybe 8-10 hours total (I am quite new to these). I didn't do a perfect job but after some glide testing (a few tosses) I put some power on and went for it. I've gotta say I love this wing! Flies pretty well in a bit of wind, too. I'm using turnigy 22-something (1400 Kv) 8x3.8SF, 2650 nanotech 3s - got unlimited vertical. I think it's pulling about 15A so could get more out of it (motor is rated 200w, 21A). Seems to pitch down a bit when I put on throttle though, especially at low speed. Might have to correct that somehow.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello! Im from Ecuador, South America, bought this flying wing in USA and brought it to my country. It flies awesome!! just as the review video on youtube by HK! I swear! the 2.2 mah batt gives you almost 10 minutes of fly time at full throttle!!. Stickers are crap thou, so take them out and put on some decals or paint it as you please. One suggestion...cover the wing with film....ITS A WHOLE NEW WING!! BELIEVE ME!! It gets stiffer and flies like a hawk!! Great first wing for the price!! I just cant get tired of it!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
not bad wing.. i really liked the looks and bought it and found out very quickly it was slow cruising flier.. LOL added: HXT 2835 (380S) 2700kv Brushless Inrunner, and what an increase in speed and the motor and prop sounds really good on full throttle. 6x4 and 2200 3s nano tech. you can get about 6-10 min i would think, depends on your flying mode. i only stay up 5.25 min and it's time to land at around 3.80 per cell. i report you decide..

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very Good flight except when i had moderate impact ,destroyed easy ,.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Provided glue is great. Give it minute on each side before putting together. Creates a strong and flexible bond, so no cracking or letting loose.



Wing to fues interlock could be better, thicknesses are off a bit, but glued wings together using the interloc as a guide, and the wings came out straight, whih is more important than the thicness difference.



Ailerons seemed too strong of a hinge, so I cut them off and tried some hinges on surface, didnt turn out too well, so I cut down some balsa ailerons from a larger plane, and used CA hinges, worked great. Except my ailerons are thicker the the plane, but they work, so I am happy.



I removed decals and painted, Should have put more thought into the color scheme, but painting worked fine (testors model paint)



Overall for the price it is good. biggest issue would be the ailerons, everythign else is Aplus
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I was interested till I saw the shipping costs as much as the plane. seems hobby king cheats on its shipping to make its prices look cheaper





EMS Express to USA (MAX 2kg)$36.79 < that way over charged



there no way in hell I am paying 74 dollars for this item with shipping =)

really you should charge 59.99 like everyone else rather than being deceptive and dishonest on your shipping costs

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
in flight is clearly visible, is stable and also very acrobatic
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
leider passen die teile nicht 100pcnt genau zusammen ( flchen am rumpf ) wrde mann die flchen wie gedacht am rupf montieren wrde sich ein unterschied von 1-2mm ergeben. kann mann aber leicht ausgleichen in dem etwas untergelegt wird.
ansonst ein leicht zu bauendes und echt nett fliegendes ding.
der grozgige kabinen raum bietet ausreuchend platz fr die ganze elektrik.
auch beim setup motor regler kann mann sich austoben.
ich flieg meinen mit einem 2836er/1100 kv auf 3s mit einer 2200er zelle und einer 9x7 klappluftschraube mit normelem mittelstch und hab 4:30 laufzeit.
die magnet befestigung der haube ist ganz ok hab aber beim ersten flug gleich mal das ding verlohren.
hab darum gleich vorne einen stift gemacht und hinten eine verriegelung, damit ist alles fest.
die wingleds hab ich nicht fest verklebt sondern machs einfach mit klebeband drauf ( erleichtert den transport )
fazit:
macht spass um das geld und ist unkompliziert zu fliegen.
mir macht das ding echt spass...........

Video:
http://www.youtube.com/user/5844tommy?feature=mhee#p/u/0/BqUPs3VunJs
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Perfect plane for flying, perfect for FPV setup, perfect in everything - but its a JIT item!!!JIT item - you have to wait extra 4-5 days before it will be shipped to you - so there is no reason to pay for express shipping!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Combine

essential items and
esc
battery
servo
motor
acc

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.