Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Flip32 All In One (Pro) controlador de vôo V1.03

Generating Links

Flip32 All In One (Pro) controlador de vôo V1.03

Preço:

Now save economize 0,00 € 0,00 €

36,04 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
747000001-0
Envio Grátis? Clique aqui aprender mais!

O FLIP32 AIO (all-in-one) controlador Pro Versão voo inclui um Flip32, MinimOSD, 5V 3A UBEC suportando até 6S, 90A sensor de corrente, um barómetro MS5611 e PDB todos em uma PCB 35x35mm com furos de montagem 30x30mm.

Esta versão do Flip32 AIO usa melhorados componentes e design que vai limitar adequadamente a tensão para o MinimOSD prevenção pico de tensão e danificar o OSD.

Características:
• STM103 MCU executa firmware Cleanflight
• saída 8PWM, suporta Octocopter
• Barómetro MS5611
• Apenas 35x35mm, 30x30mm montagem buracos
• Onboard USB (para config OSD e FC)
• 5V 3A UBEC (2-6S)
• hardware OSD, Compatível com MinimOSD / MWOSD / OSD CC3D
• PDB pequeno
• Sensores de corrente e tensão
• Melhor OSD Chip usado com menor consumo de energia
• 2x Software de série, portas seriais de hardware 2x

** Esta versão suporta apenas SPPM e RX de série, um inversor SBUS externa é necessária.

especificações:
Dimensões: 35 x 35 mm (30 x 30 milímetros furos de montagem)
Peso: 17g incluindo a fiação

inclui:
Virar 32 AIO controlador de vôo
cabos

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

razvan | Comprador Verificado

  • Overall
  • Quality
  • Value

As described

Mar 23, 2018

Probably the guys who had issue with the board didnt read the documentation.
The FC switch ar working as described on paper.
I have till now more than 10 boards, only one i succeed to break by my mistake.
Great board shame that dont support sbus straight.

razvan | Comprador Verificado

  • Overall
  • Quality
  • Value

Great product

Mar 07, 2018

Perfect cheap fc ever AIO is perfect.
For 4$ cannot complain about

razvan | Comprador Verificado

  • Overall
  • Quality
  • Value

Great product

Mar 07, 2018

Didnt had any issue with the dip switches.
I used in 4 quads, for 4$ you cant complain, osd is great.
I recommend.

XERXES | Comprador Verificado

  • Overall
  • Quality
  • Value

Correction

Feb 20, 2018

2) Connect SBUS/IBUS pin from Receiver to RX Pin on ___UART2___ (get power from somewhere else)
Notes:
The +5V and GND pins on UART2 arent suitable for reciever (its only 3V), and will also corrupt the video feed. You can use +5V and GND from Soft serial port (RGB LED port) to power your receiver or use external source/BEC.

XERXES | Comprador Verificado

  • Overall
  • Quality
  • Value

The documentation is brain damaged

Feb 18, 2018

Nathans site is really good info, but scarab-osd is no longer free so I use Minimosd-extra.
Also the switch block for this board is different again to the documentation supplied (and different to the oze32 reviewed by Nathan, otherwise very similar)
The documentation supplied for this board is very wrong. The correct settings for the switch block are:
A: OSD Mode (To program OSD) [1 2 ON; 3 4 5 6 OFF]
B: FC Mode, (To program FC) [1 2 3 4 OFF; 5 6 ON]
C: FLY Mode (OSD ENABLED for video) [1 2 OFF; 3 4 5 6 ON]
The OSD by default is configured for NTSC, if you use a PAL camera, it will disable the OSD when your camera gets power.
To fix flash to the lastest version of minimosd-extra from here: https://github.com/night-ghost/minimosd-extra
Other things:
The +5v pins on UART2 and UART soft serial 2 are actually +3V (documentation apparently wrong again)
The Power Pins Video IN and VIdeo OUT are actually VBAT (so 16V for 4S) (use external BEC power instead, or +5V pin from UART1)
External SBUS inverter is only needed for FRSKY receivers.
Other recievers with a normal implementation of SBUS will work with SBUS/IBUS via UART2 once you:
1) Install betaflight configurator, & flash latest naze32. https://github.com/betaflight/betaflight-configurator/releases
2) Connect SBUS/IBUS pin from Reciever to RX Pin on UART1 (get power from somewhere else)
3) Use betaflight configurator to enable serial rx on UART2 under ports (save/reset)
4) & enable serial based reciever IBUS under configuration (save/reset)
Notes:
The +5V and GND pins on UART2 arent suitable for reciever (its only 3V), and will corrupt the video feed. You can use +5V and GND from UART1
Soft serial port (RGB LED port) to power your receiver or use external source/BEC.
Its probably better to use the PPM input for your RX and save UART2 for a GPS for the MinimOSD

Handstek | Comprador Verificado

  • Overall
  • Quality
  • Value

Hard to setup with those dip switches

Dec 27, 2017

Use betaflight naze 32 ver 3.2.3 and scarab osd 1.6 .
Connects to turnigy i6 (updated to 14 channels) radio ok using a X6B receiver (no leads come with the hobbyking version)
A little hard to setup but good for $12 au
Check out http://nathan.vertile.com/blog/2015/11/09/rctimer-oze32-integrated-flight-controller-review-and-setup/#flash-scarab-osd
same controller

Ferry | Comprador Verificado

  • Overall
  • Quality
  • Value

How to use for a flying wing?

Dec 25, 2017

I like to use the board with a Flying Wing but how do I connect the servo's? I have motor on the 1th, 2nd is empty, 3rd is right servo and 4th is left servo. Motor response is OK but the servo do not respond at all?

Lachlan | Comprador Verificado

  • Overall
  • Quality
  • Value

Old school

Nov 27, 2017

I bought several of these boards when they were on special for about $10. Yeah they work fine and do the job, I've mostly been using them as stabilization in flying wings. But they are old school, the dip switches drive you nuts when setting them up, and they are no longer supported by cleanflight/betaflight/inav. Do your self a favour, spend a few dollars more and buy yourself an F3 board, unless you are running a super tight budget and don't mind the stuffing around.

Arturo | Comprador Verificado

  • Overall
  • Quality
  • Value

Cant Beat It For 9.99

Nov 01, 2017

I installed this on a Clone ZMR Frame Running 30a little fav ESC running Oneshot125 and it and it is very stable and very fast. Thanks HK

zain | Comprador Verificado

  • Overall
  • Quality
  • Value

Works fine

Sep 08, 2017

Using Turnigy 9x don't have SBUS but still bought it. Its a good flight controller. Checked on clean flight, looks fun.

  1. 1
  2. 2
  3. 3
Arquivos de clientes
Wiring diagram and dipswitch info Download [1096]
FLIP32_F1_Naze32_MinimOSD_Errata.txt Download [1]
FLIP32_F1_Naze32_MinimOSD_1.03_Errata_v2.txt Download [2]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!