Este incrível e única Fokker Dr.I Dreidecker (triplane) é feito de espuma EPO resistente e vem pré-pintado com impressionantes decalques de água já aplicadas.
Você será a inveja de seu clube com este triplane EPO muito original. Com ele é habilidade de voar dócil é um modelo parkflyer verdade que quase ninguém pode desfrutar.
Construindo a Fokker é fácil e rápido, basta anexar as asas e leme horizontal e insira seu próprio receptor e pacote de lipo.
Envergadura: 800 milímetros
Comprimento: 670 milímetros
Voar Peso: 750 ~ 900g
Servo: 3x4.3g 1x9g
Motor: Turnigy 2410-890Kv
ESC: 20A Brushless
Hélice: 9x4 Fly lenta
LiPo Bateria: 1000 ~ 1300mAh 3S (tamanho máximo: 45 x 30 x 73 milímetros)
Seu próprio TX e RX
LiPo Bateria: 1000 ~ 1300mAh 3S (tamanho máximo: 45 x 30 x 73 milímetros) [necessário]
A capacidade de voar algo único e especial
Características do Produto
Capacidade ( mAh)
Peso ( g )
Very low quality product. No instructions.
The paint peels.
In my case two servos are damage.I'll be completely honest when I say that I never got a single good flight out of this plane. I'm a fairly good pilot, but this thing just isn't made to fly.
Mine was extremely tail heavy. I put a good chunk of clay lead weights up front and never made it far enough to get it perfectly balanced. The problem is that the amount of weight it takes to get it balanced affects the plane's ability to fly.
From what I've read, others have had better luck than I have. I still recommend trying to buy another plane.I grabbed the v2 with the upgraded motor and some other changes. Added 2.5 oz nose weight. Add very low throws and fly. It flies like all dr1 and you need to use rudder. There is no bank and yank. There is nothing wrong with the model. It flew great and use a nano or high c battery. 4 mins max. When building scrap the paint off and use hot glue. Point at wind and use rudder to keep straight and fly it. Use power when landing. Will buy more to use for parkzone sonic combat with se5a and albatross. Thanks king.I'd not recommend attempting to fly this model at all! Unless of course you just want to keep it as a scale house model. It is almost impossible to fly. It is very heavy up to 900 grams!!! The rudder is flimsy and not very strong. The paint flakes badly. The servos were sitting in raw fuselage foam rather than proper plastic screw in inserts (O dear HK?) hence I had virtually no movement on the rudder and elevator control surfaces until I re-glued servos to the silly foam base (why not put them on a plastic screw in inserts so they don't come lose HK?) Upon maidening this model, well nothing but disaster (even though I'm a rather experience park flyer myself). Overall a joke too heavy for a start and a flimsy build and flyer. I'm so sad that I am writing a review this bad on what is one of my favorite plane designs in history. I might have to just a get a fly-zone light weight micro Fokker if I want any chance of experiencing flying the historic Fokker Dr-1 Tri-Plane (which I indeed do). Good luck getting this one up and down in one piece!Avoid this model, have just got it, not too bad BUT middle wing has considerable droop on it, and bottom wing has sweepback a la Tiger Moth. Good model spoiled by poor quality control. With past dealings with HK I will have to return the complete kit to get a replacement. Certainly will think twice in the future about buying HK own brand models :(The plane arrived with cracks in the fuselage, the rudder came loose.
HobbyKing takes over a month to give me an answer hacerca of damage in shipping.
no assembly instructions, no screwdriver, the glue that brings not know how to use and brings the putty is not known for it.Hi guys, I'm new in this site. I ask you a favor, I just bought the fokker dr1, I would like to know what propellers mounted, and where to find them on this site if there are any. Thank you very muchBought 30/11 and deliverd in italy by GLS 4/12, very fast delivery service.
The model was delivered in good conditions, very protective package.
The model: is fine, the epo is very strong and without imperfections, only the paint is a bit critical, you must be aware if don't want stripe the model, for best protect i have give an hand of transparent paint.
The CG: many forum speak about the very critical cg of this model, in the box is present a little block of clay, 50-55 grams of weight, put all the clay under the fake engine, many forum suggest to add other 30 - 40 grams of leads for obtain complessive weight 85 - 90 grams.
My Fokker still not maiden, in italy is too cold and wind in this day, i will make a first fly asap, i will write the impression. Good Fly and landing at all.Aparentemente o produto bem feito, mas no possui nenhum manual de montagem e de instalao eltrica para o iniciante no aeromodelismo.its a beautiful plane but it doesn't fly well at all , you better buy it for decoration rather then flying it
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!Customer files
Fokker Dr1 Daten download now [244kb] Assembly HInts and Bottom Wing Mounting download now [338kb] HK Fokker DR1 custom download now [1114kb] MANUAL download now [589.12Kb]