Fuel Filler Válvula L38mm

• Overall
• Quality
• Value

Very Happy.

Jul 28, 2021

All ok.

• Overall
• Quality
• Value

Its small but nice

Mar 29, 2021

I think this is for nitro , not for petrol , i dont think the rubber cant handle petrol , and make iy little bigger for petrol engines

• Overall
• Quality
• Value

sirve para combustible glow y bencina de 93 octanos?

Jun 09, 2017

sirve para combustible glow y bencina de 93 octanos?

• Overall
• Quality
• Value

Customer Rated

Feb 16, 2016

I DON'T SEEM TO BE ABLE TO SELECT NO CROWNS BUT THIS IS ALL IT IS WORTH.

AFTER GOING TO TROUBLE AND EXPENSE AND HAVING INSTALLED THE FILLER VALVE
INTO MY PIPER CUB, THE VALVE LEAKS THROUGH THE FILLER INLET. IT WILL NOT SEAL AFTER REMOVING THE FILLER-LINE PLUG. IT IS NO GOOD AT ALL.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 23, 2016

Terrible Item, i bought 2 at once, as i had a feeling...it was right. The seal one the first one pulled clean out with the probe first time. Into the bin. The second one leaked so badly first use, i pulled it out, cleaned it, and tried again, and it too fell into 3 pieces on the floor. PILE OF GARBAGE. Burn your money instead.

• Overall
• Quality
• Value

Customer Rated

Jun 02, 2014

i have had a couple now but after using for a few months i have found the O ring leaks and causes air bubbles in the fuel line but they are cheap and easyly changed

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 06, 2014

this is the second one of these that i am using so far so good

• Overall
• Quality
• Value

Customer Rated

Oct 23, 2012

I bought two of these. You need a horse to pull out the filler plug (the one made in brass - look like chrome on this picture) so if mounted on a plane, I think you will tear out the whole valve from the plane body when removing the filler plug. Otherwise function is OK = once the filler plug is inserted the valve goes to the 45 degrees hose connector. And when pulled out, using the horse, the inlet is blocked and the two hose connectors are open. And be sure not to loose the filler plug or else you can throw away the valve

• Overall
• Quality
• Value

Customer Rated

Sep 22, 2012

I received 2 the other day and was imprested as usual with delivery, HK always no matter what get the order delivered, but i was not imprested with these little valves as both were jammed and did no function at all. Easy fix, just pull out the brass filler (the one with serrated grip), carefully remove the O ring with a needle hook and apply heat from a lighter to the aluminium between the 90 and 45 degree pipes till its so hot you cannot hold it, then slam it down on the nut side squarely and it should pop out the stuck spring loaded valve. work it many times to free it up and be careful not to damage the internal fitting surface.

• Overall
• Quality
• Value

Customer Rated

Sep 22, 2012

I received 2 the other day and was imprested as usual with delivery, HK always no matter what get the order delivered, but i was not imprested with these little valves as both were jammed and did no function at all. Easy fix, just pull out the brass filler (the one with serrated grip), carefully remove the O ring with a needle hook and apply heat from a lighter to the aluminium between the 90 and 45 degree pipes till its so hot you cannot hold it, then slam it down on the nut side squarely and it should pop out the stuck spring loaded valve. work it many times to free it up and be careful not to damage the internal fitting surface.