Produzido por Enerland / A123 Systems
Capacidade nominal & Tensão: 1.1Ah, 3.3v
Recomendado método de carga padrão: 1.5A para CCCV 3.6v, 45min
carga recomendado rápido atual: 5A a CCCV 3.6v, 15min
Max descarga contínua: 30A
descarga de pulso em 10sec: 65A
Ciclo de vida em 10C de descarga, 100% DOD: Mais de 1.000 ciclos
Recomendada de carga / tensão de corte: 3,5V a 2V
Temperatura de operação: -30 ~ + 60degC
Celular Peso: 39gVocê pode ser capaz de encontrar essas células a um preço mais baixo a partir de fontes reformar ou de empresas que não são mais revendedores A123; descarregamento de estoque antigo.
Todas as nossas células A123 são novos e continuamos a manter um bom relacionamento com A123 Systems para fins de repovoamento e de garantia.Todas as células A123 são garantidos por 12 meses!
Estas são células A123 genuína. falsificações não chineses.
Características do Produto
Peso ( g )
Capacidade ( mAh)
Descarga ( c)
Comprimento -A (mm):
Altura -B (mm):
Unit Weight (g)
Max Taxa de carga (C):
. !bought 2 inorder to make a reciever pack an wow!!! perfict cells charged fuff the battery fall fast at 2.75v but who is going to tack it that low :)I give 5 stars and will recomend this battery to anyone
Excellent batteries. Small size, fits well some special applications, like airsoft guns. plus pretty hard worker battery, compared to LiPo.These batteries don't come near their big brothers, the 2300mAh cells.
These can be drained up to about 10A, anything higher than that will make the voltage drop considerably.
I've made a pack with 4 of these cells, and at 18A dicharge rate the voltage very quickly drops to about 2.5V / cell. Not good. It seems they are 10C cells.
However, they can be used in low current applications with good results. They can be used for making RX packs. And they can be recharged pretty fast.well its complicated
the battery that i got wasent original but avery good forgery
the printing was dots as if from aprinting machine but if you will look good you will see that the dots are conected and not clear
the plastic was nearley the same shade as the original and nearly the same texture
the mah is abaut 35pcnt less
i dont know all the story exactly
before ayear there were two kinds of batteries selling on the net -fake and original and the both of them were seling for 2.5$ each. this year vpower that was an ebike company that used these batteries closed . probebley they were cough by a123 company.
hobbyking use to buy the original batteries from them, now what is left is onley the coppy. i have an original battery i got last year that is much better than this one i got now.
stil you can get 700mah out of them 3times heveyer than alipoim very dis aponted
its right that there are fake a123 batteries on the net
and i have showen how to tell afake from an original in the files aded
but this exact battery without the tabs can be bough on the net for less than athird of the priceExcellent cells but capacity is nearer 950maI bought several of these a couple of years ago and soldered two in series to use as receiver packs. I also purchased PRODUCT ID: JSTMF-2S-20 balance extension wires and soldered them up to properly balance charge the two cells between flights. they hold their voltage very well between charges and can be quickly balanced charged at the field and don't need a regulator for most 6 volt capable receivers and servos. They make perfect replacement packs for 5 cell NiCads and NiMHs at about the same weight and comparible capacity, but much stronger voltage holding capability. At 5-6 amps constant load, they only drop about .5 volts, which is less than half their Nickle counterparts. Now HK has the newer, lighter flat packs at much less money and weight. Gottal love it!I have used these cells for 3 years in a 3 cells and 4 cell packs.
The 3 cell pack is going fine after ca. 50 charges but the 4 cell quit after less than 20 charges. I charge them at 2 amp. I have never got more than 900 mah. out of these 1100 mah cells and not more than 1900 of the 2300 mah cells
This LiFePo4 Cell is ideally suited for Airsoft the weapon, I use 13.2v for the weapon with a spring of 160 m/s and it seems to me and on 190 will go)))
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!