Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • USA

GWS EP Hélice (RD-1365 330x165mm)

GWS EP Hélice (RD-1365 330x165mm)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
125 g
SKU:
GWS-prop-RD-1365
Descrição
do

Todos GWS EP Hélices abastecido!
GWS EP Hélice (RD-1365 330x165mm)
As cores variam. Nem sempre laranja



DD: Direct Drive (rápido fiação) Borda -Straight
RD: Redução da unidade (Fly lenta, Outrunner ou Gearbox) - borda curva
Product
Specifications

Características do Produto

  • SKU:
    GWS-prop-RD-1365
  • Brand:
    N/D
  • Peso ( g )
    125.00
  • Comprimento
    0.00
  • Largura:
    0.00
  • Altura:
    0.00
  • Afastamento Y ( Inch)
    6.50
  • Material
    N/D
  • Rotação:
    N/D
  • Unit Weight (g):
    N/D
  • Digitar
    N/D
  • Contagem de lâmina
    N/D
  • Diâmetro X ( Inch):
    13.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Quite agood prop. i use it with c4250 kv600 after widening the hole abit so it can screw on . works good at 5s but 6s or higher kv will be to much for the prop and it will start viberating eventualy will brake off. but gives 500w easely i think thrust of 1750g if i remember good. great for multycopter because its thin it reacts fast and safer for motor shaft and user. great little prop
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very good prop if you have the right gearbox. comes in 6 pack very powerful.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Boa helice para ser usada com reducao.



Nao da para usar em motores direct drive (sem recucao) por ser mole demais.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought these for the use in a 1,5 kg scratchbuilt 3d foamy, not sure if they would work with a Turnigy 35-48 1100 kv. With a little bit of drilling(from 3 to 6mm) & grinding, they actually work very well ~ 700w on 4s. The core/base is very thin though, & the blades are soft - compared to the much stiffer APC, JXF, JM etc props. Thus, if you bump in to something - these wont make the alu prop shafts bend - so easily...
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.