New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

GWS S03N2 D HP2BB 30g / 0.10Sec / 6,6 kg Servo Digital

GWS S03N2 D HP2BB 30g / 0.10Sec / 6,6 kg Servo Digital

Shipped From:
  • International (Hong Kong)
Discontinued Product

Please continue searching for a similar product.
Peso:
120 g
SKU:
GWSD03J
WANT FREE SHIPPING? Click here to find out more!

GWS S03N2 D HP2BB 30g / 0.10Sec / 6,6 kg Servo Digital

Peso: 39g
Velocidade: 0.12sec / 60deg @ 4.8V / 0.10sec / 60deg @ 6v
Stall Torque: 5.6kg.cm @ 4.9v / 6.6kg.com @ 6v
Tensão: 4,8 ~ 6v
Lead: 30 centímetros
Ligue: JR

  • SKU GWSD03J
  • Brand -
  • Peso ( g ) 120.00
  • Comprimento 0.00
  • Largura 0.00
  • Altura 0.00
  • Torque ( kg) ( min. 0,01 kg ) 6.60
  • Speed ​​( Sec / 60deg ) 0.10
  • A ( mm ) 37.00
  • B (mm) 39.00
  • C ( mm ) 34.00
  • D ( mm ) 20.00
  • E ( mm) 53.00
  • F ( mm ) 26.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

****!!! Ordered five of these and two died almost instantly. Did not even finish getting them setup. Now I am stuck whether to order replacements or change them all out. To add to it now they are out of stock!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

****!!! Ordered five of these and two died almost instantly. Did not even finish getting them setup. Now I am stuck whether to order replacements or change them all out. To add to it now they are out of stock!!!!

I put these on my MXS as an upgrade from my HK-752's and they are good. One started to jitter, but that was because I tried running that one on 7.4v. Overall, it's worst the money. SO GO OUT AND BUY!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I put these on my MXS as an upgrade from my HK-752's and they are good. One started to jitter, but that was because I tried running that one on 7.4v. Overall, it's worst the money. SO GO OUT AND BUY!!!

hoi
ik heb er 6 stekken in een jak van gb models 1.80 sp
zeer goede servo's met perfect mindelpunt
voor die prijs ,zeer goed
dank u hobby king

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

hoi
ik heb er 6 stekken in een jak van gb models 1.80 sp
zeer goede servo's met perfect mindelpunt
voor die prijs ,zeer goed
dank u hobby king

On the bench, very quick and powerful @ 5 and 6V.



1mm overshoot in one direction on centering, on an 80mm arm attatched to the servo.

(Minimal at the end of the servo arm)



Did disassemble one, all wires are glued down, so no problems with wires breaking off.



Pcb board a little crooked, but not loose. Could use a bit of glue along the sides of the Pcb board to make sure it does not move in the future.



Ball bearings top and bottom of main gear.

No slop in the gear train whatsoever.



O rings (2) in the servo case, and 1 o ring on the output shaft as well.



So far, looks good.



(psalso takes Futaba servo arms!!)



Photos on forum under "servos".



Bj.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

On the bench, very quick and powerful @ 5 and 6V.



1mm overshoot in one direction on centering, on an 80mm arm attatched to the servo.

(Minimal at the end of the servo arm)



Did disassemble one, all wires are glued down, so no problems with wires breaking off.



Pcb board a little crooked, but not loose. Could use a bit of glue along the sides of the Pcb board to make sure it does not move in the future.



Ball bearings top and bottom of main gear.

No slop in the gear train whatsoever.



O rings (2) in the servo case, and 1 o ring on the output shaft as well.



So far, looks good.



(psalso takes Futaba servo arms!!)



Photos on forum under "servos".



Bj.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!